Inner Diameter Measuring Instruments（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)

  MITUTOYO

  • A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation. • Titanium-coated measuring pins provide excellent durability and impact resistance andallow the instrument to measure right to the bottom of a blind hole. • Three-Point contact measuring head enables highly repeatable measurement data to be obtained. • The ABSOLUTE linear encoder eliminates overspeed errors. • GO/NO-GO judgment function. • Dual HOLD function buttons, optimally located, enable high operability. • 330-degree rotatable display unit for easy reading at any angle. • Measurement can be made close to the bottom of a blind hole. • Can measure deep holes by attaching an optional extension rod. • Digimatic output port enables inclusion in a statistical process control or networkedmeasurement system. • Interface Input Tools are available that enable the conversion of measurement datato keyboard signals that are then directly input to cells in off-the-shelf spreadsheet softwaresuch as Excel. • Interchangeable-Head Bore Gages are available in part sets and full sets.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest (Type II) SERIES 368 — Three-point Internal Micrometers

  MITUTOYO

  • Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool. • Same accuracy as the titanium-coated Holtest models. • Constant-force device allows repeatable measurement. • Can measure deep holes using an Extension Rod (optional).

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  MITUTOYO

  • Titanium-coated measuring pins on the threepoint type (over 6mm range models)provide excellent durability and impact resistance and allow the instrument to measure right tothe bottom of a blind hole. • Three-point bore micrometer with measuring range 6mm or longer allows stable measurementthrough automatic centering. • Can measure deep holes using an Extension rod (optional) which is available on modelsover 6mm (.275") measuring range. • Ratchet Stop ensures constant-force, repeatable measurement. • Setting Rings for accurately setting the instrument are optional.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series, Short Leg Cylinder Gauge CGB-X

  MITUTOYO

  Short leg cylinder gauge. 511 series.

  Calibration Certificate
  -

  From: 3,589,154 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stand inner diameter measuring instrument BST-1B

  CITIZENSEIMITSU

  [Features]·Inner diameter measuring tool with wide measuring range·With measuring depth and measuring force adjustment function·Horizontal stand

  Calibration Certificate
  -

  From: 95,085,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CITIXEN Stand Inner Diameter Measuring Tool BST-2B

  CITIZENSEIMITSU

  For inner diameter measurement of precision small accessories.[Model]Without indicator / with indicator 3M-100

  Calibration Certificate
  -

  From: 41,257,111 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Cylinder Gauge

  OZAKI MFG (PEACOCK)

  Dial gauge is not included.[Features]· Conversion rods made of carbide alloy are also available (CC-01, CG-01).· Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm)

  Calibration Certificate
  -

  From: 5,799,423 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Gauge CC-R Series

  OZAKI MFG (PEACOCK)

  Materials to be measured (workpieces) are not easily scratched because the part that makes contact with the measurement target (workpiece) has been cut into a large rounded shape, which is then quenched and polished.

  Calibration Certificate
  -

  From: 8,500,163 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Gauge CG-R Series

  OZAKI MFG (PEACOCK)

  Materials to be measured (workpieces) are not easily scratched because the part that makes contact with the measurement target (workpiece) has been cut into a large rounded shape, which is then quenched and polished.

  Calibration Certificate
  -

  From: 8,580,831 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Extension Rod

  MITUTOYO

  By connecting to an inner diameter measuring tool, it is possible to measure deep holes.Length (mm): 100 to 150

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Gauge (NA511)

  BLUEBIRD

  Calibration Certificate
  -

  From: 2,481,219 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Gauge

  BOWERS

  · New type micro bore gauge for small diameter measurement.· This compact size fits in a single hand.

  Calibration Certificate
  -

  From: 62,748,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (90 degrees )Bevel Gauge EA725AA-3

  ESCO

  【Product Specifications】・Measure a diameter by directly imposing the plunger on the beveled hole.・Target…Inside measurement・Applicable angle…0 to 90°・Measurement range…0 to 25mm

  Calibration Certificate
  -

  From: 16,290,724 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type

  MITUTOYO

  • Excellent water- and drip-proof characteristics (IP43).• Smooth movement thanks to the improved design of bush and stem.• Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant.• Lightweight type (70g).

  Calibration Certificate
  -

  From: 1,667,700 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 100 to 160 mm

  TECLOCK

  [Features]・ The tip of the probe uses a cemented carbide ball with excellent abrasion resistance.・ The integrated direction board with a unique shape has achieved high stability of pointing.[Applications]・ Measurement of inner diameter from ø100 to ø160 mm.・ It is a short type.[Product Specifications]・ Measurement range (mm): 100 to 160・ Length under the grip (mm): 150・ Number of spare rods (pieces): 13 included・ Spare washer (sheets): 4 included・ JAN code: 4560120870304・ Trusco Code: 838-0356・ Weight: 300 g

  Calibration Certificate
  -

  From: 11,027,820 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Teclock, Cylinder Gauge

  TECLOCK

  [Features]・ The tip of the probe uses a cemented carbide ball with excellent abrasion resistance.・ The integrated direction board with a unique shape has achieved high stability of pointing.[Applications]・ Measurement of inner diameter from ø160 to ø250 mm.・ It is a short type.[Product Specifications]・ Measurement range (mm): 160 to 250・ Length under the grip (mm): 150・ Number of spare rods (pieces): 5 included・ Spare washer (sheets): 5 included・ Extension (mm): 50 included・ JAN code: 4560120870328・ Trusco Code: 816-7806・ Weight: 860 g

  Calibration Certificate
  -

  From: 17,510,488 VND
  Days to Ship: Số ngày giao hàng: 27 Day(s) or more

  27 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TECLOCK, Micro Hole Test, Measuring Range 1.7 to 3.2 mm

  TECLOCK

  [Features]·Achieved repeatability precision of 2 µm for small inner diameter, which is difficult to measure.[Applications]·Used for measuring small inner diameters from ø1.70 to ø3.20[Product Specifications]·Measuring range (mm) probe number 012/013/014/015: 1.70 to 2.10/2.10 to 2.40/2.30 to 2.70/2.70 to 3.20·TECLOCK Micro Hole Test·JAN Code: 4560120873244·Trusco Code: 816-7835・ Weight: 100 g[Set Contents / Accessories]·probe: 4 pcs.

  Calibration Certificate
  -

  From: 28,723,531 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Horizontal Standing External Diameter Measuring Instrument

  CITIZENSEIMITSU

  [Features]· MEI-1: Outer diameter measuring instrument that enables absolute measurements· H-2B: Outer diameter measuring instrument that enables high precision comparative measurement· H-2LB: Supports components up to 45 mm

  Calibration Certificate
  -

  From: 38,437,968 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shallow Hole Cylinder Gauge, CGF Series

  AS ONE

  It is possible to measure the inner diameter near the bottom of the hole.Measurement range (mm): 15 to 150

  Calibration Certificate
  -

  From: 12,147,467 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  526 Series Small-Caliber Cylinder Gauge CG-A Anvil

  MITUTOYO

  [Features]The diameter of small holes can be measured with high precision.Measurement range (mm): 7 to 18

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wrench For Cylinder Gauge

  MITUTOYO

  Wrench for cylinder gauge.Width across flats (mm): 7Thickness (mm): 1.5

  Calibration Certificate
  -

  From: 78,919 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Anvil CG-S10A

  MITUTOYO

  [Features]· Replace with the appropriate anvil according to the measurement dimensions.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Wrench (For CG-S18A)

  MITUTOYO

  Wrench for inner diameter measuring tool (for CG-S18A).Width across flats (mm): 3.9Thickness (mm): 1.5

  Calibration Certificate
  -

  From: 72,057 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series, Standard Cylinder Gauge CG-AX Sub-Anvil

  MITUTOYO

  Part for cylinder gauge, sub-anvil.Compatible: CG-150AX·CG-400AX

  Calibration Certificate
  -

  From: 1,128,891 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil For 511 Series Shallow-Hole Cylinder Gauge CGF-X

  MITUTOYO

  You can measure inner diameter near the bottom of the hole.Cemented carbide balls are used for the probe and the tip of each anvil, providing excellent durability and abrasion resistance.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series Cylinder Gauge With Micrometer Head CGM-X Wrench

  MITUTOYO

  Mitutoyo inner diameter measuring instrument 511 series cylinder gauge with micrometer head CGM-X spanner

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil for Bore Gages SERIES 526 — for Extra Small Holes

  MITUTOYO

  Anvil for Bore Gages SERIES 526.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 18-160mm)

  MITUTOYO

  • Compact and lightweight due to the short length below the grip. • Longer plunger stroke with no affect on accuracy. • Carbide contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 3,205,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 2,665,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)

  MITUTOYO

  • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  From: 3,973,077 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 339 — Extension Pipe Type

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining extension pipes and anvils with the micrometer head. • Carbide measuring faces are available. • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangable-Head Sets for Holtest (Type II) SERIES 368 — Three-point Internal Micrometers

  MITUTOYO

  • Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool. • Same accuracy as the titanium-coated Holtest models. • Constant-force device allows repeatable measurement. • Can measure deep holes using an Extension Rod (optional).

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  MITUTOYO

  Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  MITUTOYO

  Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Setting Rings SERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore Gages(CERA/Steel)

  MITUTOYO

  • Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Individual Metric Square Gauge Blocks

  MITUTOYO

  • Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes. • Please add the suffix number representing the national standard and grade required at the end of the Order No. when ordering these items. • Special sizes that are not included in the charts can be supplied custom-made on request. • Mitutoyo accessory sets are available for expanding the range of square gauge block applications,especially for rapid assembly of precision gages.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Individual Metric Rectangular Gauge Blocks

  MITUTOYO

  • If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. • Nominal sizes which are not included in the chart below can be supplied custom-made on request. • Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibrationwhich certifies that the gauge block was calibrated by interferometry.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)

  MITUTOYO

  • Micrometer head is attached to the anvil for accurate dimensional setting. • Longer plunger stroke with no affect on accuracy.. • Carbide is used for the contact point ensuring high durability and wear resistance.. • This model reduces the influence of heat from the operator's hand by 50% by increasingthe. grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.. • Wide measuring range with sub-anvils.. • Alternative indicators may be used in place of those recommended*.. * Some indicators and protection covers cannot be used with these bore gages.. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other.than the recommended models.. • Optional extension rods can be attached for measuring deep holes.. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage. before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 0.7-6.5inch)

  MITUTOYO

  • Compact and lightweight due to the short length below the grip. • Longer plunger stroke with no affect on accuracy. • Carbide contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately settinga gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511(Measuring Range: 0.7-16inch)

  MITUTOYO

  • Longer plunger stroke with no affect on accuracy. • Carbide is used for the contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Optional extension rods can be attached for measuring deep holes. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — for Small Holes(Measuring Range: 0.24-0.74inch)

  MITUTOYO

  • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	CITIZENSEIMITSU	CITIZENSEIMITSU	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	BLUEBIRD	BOWERS	ESCO	MITUTOYO	TECLOCK	TECLOCK	TECLOCK	CITIZENSEIMITSU	AS ONE	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)	ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)	Holtest (Type II) SERIES 368 — Three-point Internal Micrometers	Holtest SERIES 368 — Three-point/Two-point Internal Micrometers	511 Series, Short Leg Cylinder Gauge CGB-X	Stand inner diameter measuring instrument BST-1B	CITIXEN Stand Inner Diameter Measuring Tool BST-2B	Small Diameter Cylinder Gauge	Cylinder Gauge CC-R Series	Cylinder Gauge CG-R Series	Inner Diameter Measuring Instrument, Extension Rod	Cylinder Gauge (NA511)	Micro Gauge	(90 degrees )Bevel Gauge EA725AA-3	SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type	TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 100 to 160 mm	Teclock, Cylinder Gauge	TECLOCK, Micro Hole Test, Measuring Range 1.7 to 3.2 mm	Horizontal Standing External Diameter Measuring Instrument	Shallow Hole Cylinder Gauge, CGF Series	526 Series Small-Caliber Cylinder Gauge CG-A Anvil	Wrench For Cylinder Gauge	Inner Diameter Measuring Instrument, Anvil CG-S10A	Inner Diameter Measuring Instrument, Wrench (For CG-S18A)	511 Series, Standard Cylinder Gauge CG-AX Sub-Anvil	Anvil For 511 Series Shallow-Hole Cylinder Gauge CGF-X	511 Series Cylinder Gauge With Micrometer Head CGM-X Wrench	Anvil for Bore Gages SERIES 526 — for Extra Small Holes	Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 18-160mm)	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)	Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)	Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)	Tubular Inside Micrometers SERIES 339 — Extension Pipe Type	Non-Interchangable-Head Sets for Holtest (Type II) SERIES 368 — Three-point Internal Micrometers	Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers	Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers	Setting Rings SERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore Gages(CERA/Steel)	Individual Metric Square Gauge Blocks	Individual Metric Rectangular Gauge Blocks	Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)	Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 0.7-6.5inch)	Bore Gages SERIES 511(Measuring Range: 0.7-16inch)	Bore Gages SERIES 511 — for Small Holes(Measuring Range: 0.24-0.74inch)
From						3,589,154 VND	95,085,068 VND	41,257,111 VND	5,799,423 VND	8,500,163 VND	8,580,831 VND		2,481,219 VND	62,748,240 VND	16,290,724 VND	1,667,700 VND	11,027,820 VND	17,510,488 VND	28,723,531 VND	38,437,968 VND	12,147,467 VND		78,919 VND		72,057 VND	1,128,891 VND						3,205,000 VND	2,665,000 VND	3,973,077 VND
Days to ShipSố ngày giao hàng	46 Day(s) or more	Quote	Quote	Quote	46 Day(s) or more	2 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	Quote	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	46 Day(s)	12 Day(s) or more	27 Day(s) or more	6 Day(s) or more	9 Day(s) or more	12 Day(s) or more	9 Day(s) or more	9 Day(s)	Quote	9 Day(s)	9 Day(s)	9 Day(s) or more	9 Day(s) or more	Quote	9 Day(s) or more	Quote	46 Day(s)	46 Day(s)	2 Day(s)	Quote	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Quote	46 Day(s) or more	Quote	Quote	Quote
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…