Ejector Sleeves

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. In addition, the coaxiality is 0.005, making it a more accurate product than usual.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  2.5 ～ 6	1.8 ～ 5.95	SKH51	0.8 ～ 5.1	4mm(T4)	Single sleeve	No	◎0.005	Grinding	+0.005/0	0/-0.005	No

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

  MISUMI

  If your product inquiries are out of catalogue, we can support by drawing (Made to order).Please contact PM_BD@misumi.co.th

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  4 ～ 10	3 ～ 9.95	SKD61	1.5 ～ 7.9	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	Nitrided	◎0.03	Reaming	H7	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The tip wall thickness can be set to a minimum of 0.6mm, and the brim thickness can be selected from 4mm, 6mm/8mm (JIS standard).

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	No	◎0.005 / ◎0.01	Grinding	+0.005/0 / +0.01/0	0/-0.005 / -0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

  MISUMI

  Stepped ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, free specification type.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  4 ～ 16	3 ～ 15.95	SKD61	1.5 ～ 13	4mm(T4)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-

  MISUMI

  Stepped ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, free specification type.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  5 ～ 20	3.5 ～ 19.95	SKD61	2 ～ 16	6mm(JIS) / 8mm(JIS)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

  MISUMI

  High-speed steel SKH51, coaxiality ◎0.01, single wall thickness 0.6mm~, S dimension long type stepped ejector sleeve.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	No	◎0.01	Wire cutting & polishing	+0.01/0	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

  MISUMI

  Die steel SKD61+ nitriding, coaxiality ◎0.06, collar thickness 4mm, JIS/standard length type stepped ejector sleeve.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  4 ～ 20	3 ～ 6.5	SKD61	1.5 ～ 15	4mm(T4) / 8mm(JIS)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

  MISUMI

  Stepped ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, JIS/total length specified type.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Tapered or not
  4 ～ 20	3 ～ 6.5	SKD61	1.5 ～ 15	4mm(T4) / 8mm(JIS)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	No

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
D (Shaft diameter)(mm)
P (Tip diameter)(mm)
Material
V (Hole diameter)(mm)
Head thickness
Product composition
Surface treatment
Concentricity
Boring method
Inner dia. tolerance
Shaft diameter tolerance
Tapered or not

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type	Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-	Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to ShipSố ngày giao hàng	6 Day(s) or more	10 Day(s)	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more
D (Shaft diameter)(mm)	2.5 ～ 6	4 ～ 10	3.5 ～ 13	4 ～ 16	5 ～ 20	3.5 ～ 13	4 ～ 20	4 ～ 20
P (Tip diameter)(mm)	1.8 ～ 5.95	3 ～ 9.95	3.2 ～ 12.9	3 ～ 15.95	3.5 ～ 19.95	3.2 ～ 12.9	3 ～ 6.5	3 ～ 6.5
Material	SKH51	SKD61	SKH51	SKD61	SKD61	SKH51	SKD61	SKD61
V (Hole diameter)(mm)	0.8 ～ 5.1	1.5 ～ 7.9	0.8 ～ 11.7	1.5 ～ 13	2 ～ 16	0.8 ～ 11.7	1.5 ～ 15	1.5 ～ 15
Head thickness	4mm(T4)	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4)	6mm(JIS) / 8mm(JIS)	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4) / 8mm(JIS)	4mm(T4) / 8mm(JIS)
Product composition	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve
Surface treatment	No	Nitrided	No	Nitrided	Nitrided	No	Nitrided	Nitrided
Concentricity	◎0.005	◎0.03	◎0.005 / ◎0.01	◎0.06	◎0.06	◎0.01	◎0.06	◎0.06
Boring method	Grinding	Reaming	Grinding	Reaming	Reaming	Wire cutting & polishing	Reaming	Reaming
Inner dia. tolerance	+0.005/0	H7	+0.005/0 / +0.01/0	H7	H7	+0.01/0	H7	H7
Shaft diameter tolerance	0/-0.005	-0.01/-0.02	0/-0.005 / -0.01/-0.02	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02
Tapered or not	No	No	No	No	No	No	No	No

Loading...Tải…