(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more
Guide Rollers
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
30 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Y Groove Guide Rollers (GRL-Y)
IMAO CORPORATION
Medium load specification transport roller, optimal for sliding doors or rollers for transport (Y-type single bearing).[Features]• Optimal for various sliding doors and conveyor rollers.• Specifications for medium loads.• Commercial polished round steel can be used for rails.• For Y-type products, target rails are made of rounded steel, reducing residual shavings left behind.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) V Groove No Shaft (Round Hole) Single Steel / Stainless Steel Plastic ～ Steel 30 ～ 70 Not Lined 12 ～ 28 - - Electroless Nickel Plating / Not Provided - From: 488,595 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Guide Rollers-V Groove/For Wire/For L Channel Track/For Wire Cable
MISUMI
guide roller with a built-in bearing that can be used to guide various rails and workpieces. There are three types of processing for the outer diameter groove: wire type (60 degree angle), channel type (90 degree angle), and sheave wire type (R processing). Materials can be selected from steel (equivalent to S45C), aluminum alloy, polyacetal, conductive MC nylon, and MC nylon.
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) V Groove No Shaft (Round Hole) Single Steel Aluminum ～ Steel 20 ～ 100 Not Lined - - 12 ～ 88 Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided 10 ～ 20 From: 264,406 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyGuide Rollers Flat, Double Flanged, Tapered
MiSUMi EconomyMISUMI
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - No Shaft (Round Hole) Single - - - - - - - Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided 10 ～ 16 Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - No Shaft (Round Hole) Single - - 20 ～ 100 - - - 14 ～ 88 Electroless Nickel Plating / Black Oxide / Not Provided 10 ～ 16 From: 108,463 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
U Groove Guide Rollers (Double Bearings) (GRL-S2-R)
IMAO CORPORATION
[Features]• Optimal for various sliding doors and conveyor rollers. Heavy duty specifications.• R-type products have target rails with a rounded shape, reducing residual shavings.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Round Groove No Shaft (Round Hole) Double Steel Steel 40 ～ 70 Not Lined 23 ～ 39 - - Electroless Nickel Plating - From: 747,870 VND Days to Ship: Số ngày giao hàng: 1 Day(s) or more
1 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Double-Flanged Guide Rollers (Double Bearings) (GRL-S2-H)
IMAO CORPORATION
Heavy load specification guide roller, optimal for sliding doors or rollers for transport. (H-type double bearings)[Features]• Optimal for various sliding doors and conveyor rollers.• Heavy duty specifications.• Commercial polished square steel can be used for rails.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Double Flanged No Shaft (Round Hole) Double Steel Steel 30 ～ 70 Not Lined 18 ～ 39 - 22 ～ 46 Electroless Nickel Plating 10 ～ 28 From: 567,613 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Double-Flanged Guide Rollers (GRL-H)
IMAO CORPORATION
Medium load specification guide roller, optimal for sliding doors or rollers for transport. (H-Type single bearing)
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Double Flanged No Shaft (Round Hole) Single Steel / Stainless Steel Plastic ～ Steel 30 ～ 70 Not Lined 12 ～ 28 - 22 ～ 46 Electroless Nickel Plating / Black Oxide / Not Provided 5 ～ 17 From: 481,700 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
U Groove Guide Rollers (GRL-R)
IMAO CORPORATION
Moderate load specification guide roller. (R type single bearing)[Features]• Optimal for various sliding doors and conveyor rollers.• Specifications for medium loads.· RLR roller-rails can be used for rails.• Hardened product with abrasion resistance. Prevents scratches and other damage caused by contaminants such as shavings mixing into product lines.• For R type products, target rails are made with a rounded shape, reducing residual shavings left behind.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Round Groove No Shaft (Round Hole) Single Steel / Stainless Steel Plastic ～ Steel 30 ～ 70 Not Lined 12 ～ 28 - 22 ～ 51 Electroless Nickel Plating / Black Oxide / Not Provided - From: 456,860 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Y Groove Guide Rollers (Double-Row Angular Contact Ball Bearing) (GRL-SWA-Y)
IMAO CORPORATION
[Features]• Optimal for use in areas affected by bi-directional axial loads, radial loads, and moment loads.• Optimal for various sliding doors and conveyer rollers.• Heavy duty specifications.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) V Groove No Shaft (Round Hole) Double Steel Steel 50 ～ 70 Not Lined 21 ～ 28 - - Electroless Nickel Plating - From: 1,077,060 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
V Groove Guide Rollers (Double Bearings) (GRL-V)
IMAO CORPORATION
[Features]• Heavy load specification guide roller (V type double bearing), optimal for sliding doors or rollers for transport.• Commercial polished hexagonal steel can be used for rails.• Hardened product with abrasion resistance. Prevents scratches and other damage caused by contaminants such as shavings mixing into product lines.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Trapezoid Groove No Shaft (Round Hole) Double Steel / Stainless Steel Stainless Steel ～ Steel 30 ～ 70 Not Lined 18 ～ 39 - 22 ～ 46 Electroless Nickel Plating / Black Oxide / Not Provided - From: 707,508 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Vertical Guide Rollers-Metal/Core Only
MISUMI
A guide roller used for vertical applications. Since it incorporates rollers and cantilever pins, the time and effort required to arrange parts and assembly can be reduced. You can choose the material of the roller from steel (equivalent to S45C), stainless steel (SUS304), and aluminum (aluminum alloy). Please refer to the specification table for the specifications of retaining rings. The bearings are press-fitted into the rollers. You can specify the length of the cantilever pin in 1mm increments using additional machining (NC).
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat Shaft Double Steel Aluminum ～ Steel 20 ～ 50 Not Lined 20 ～ 50 - - Electroless Nickel Plating / Clear Anodize / Not Provided 20 ～ 50 From: 580,109 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Round Plastic Guide Rollers (GRL-P-U-SUS)
IMAO CORPORATION
[Features]• Low noise thanks to plastic construction
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat No Shaft (Round Hole) / Shaft Single Stainless Steel Plastic 13 ～ 35 Not Lined 5 ～ 9 - - Not Provided - From: 281,700 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Urethane Roller (Light load type) (CTG-BR)
IMAO CORPORATION
Light load specification polyurethane guide roller, optimal for sliding doors or rollers for transport. (F-type single bearing)
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat No Shaft (Round Hole) Single Steel Plastic 20 ～ 60 Polyurethane 8 ～ 15 95 - Not Provided - From: 144,203 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
A guide roller with a built-in bearing that can be used to guide various rails and workpieces. The outer diameter part is a flat type. Materials can be selected from steel (equivalent to S45C), aluminum alloy, and polyacetal.
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat No Shaft (Round Hole) Single Steel Aluminum ～ Steel 30 ～ 100 Not Lined - - - Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided 12 ～ 16 From: 264,406 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Y Groove Guide Rollers (Double Bearings) (GRL-S2-Y)
IMAO CORPORATION
Heavy load specification guide roller, optimal for sliding doors or rollers for transport. (Y-type double bearings)
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) V Groove No Shaft (Round Hole) Double Steel Steel 50 ～ 70 Not Lined 27 ～ 39 - 32 ～ 41 Electroless Nickel Plating - From: 942,810 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
guide roller with a built-in bearing that can be used to guide various rails and workpieces. The outer diameter part is an H-shaped double flange type. You can also specify the groove width and groove depth. Materials can be selected from steel (equivalent to S45C), aluminum alloy, and polyacetal.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Double Flanged No Shaft (Round Hole) Single Steel Aluminum ～ Steel 15 ～ 60 Not Lined - - - Clear Anodize / Not Provided 9 ～ 14 Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Guide Roller Brackets (GRL-BL-SUS)
IMAO CORPORATION
Bracket for mounting a guide roller. Made of SUS, which is ideal for use in food and sanitary equipment. [Features]• Can be used as a bracket for mounting a guide roller.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - No Shaft (Round Hole) - - - 40 ～ 60 - 7 ～ 10 - - - - From: 1,636,766 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Flat Plastic Guide Rollers (GRL-P-F-SUS)
IMAO CORPORATION
[Features]• Low noise thanks to plastic construction.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat No Shaft (Round Hole) / Shaft Single Stainless Steel Plastic 13 ～ 35 Not Lined 5 ～ 9 - - Not Provided - From: 285,713 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
U Groove Plastic Guide Rollers (GRL-P-R-SUS)
IMAO CORPORATION
[Features]• Low noise thanks to plastic construction
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Round Groove No Shaft (Round Hole) / Shaft Single Stainless Steel Plastic 22 Not Lined 6 - - Not Provided - From: 312,998 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Guide roller (V type, single bearing) (GRL-SH1-V)
IMAO CORPORATION
Medium load specification guide roller, optimal for sliding doors or rollers for transport. (V-type single bearing)
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Trapezoid Groove No Shaft (Round Hole) Single Steel Steel 50 ～ 60 Not Lined 19 ～ 23 - 40 ～ 47 Black Oxide - From: 959,668 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Vertical Guide Rollers-Urethane
MISUMI
urethane-lined guide roller used for vertical applications. The rollers are lined, so they can be transported without damaging the workpiece. Since it incorporates rollers and cantilever pins, the effort of arranging parts and assembling can be reduced. You can choose the material of the roller core from stainless steel (SUS304) or aluminum (aluminum alloy). The hardness of urethane (natural color) is Shore A90. A90 is an ether-based urethane. Please refer to the specification table for the specifications of retaining rings. The bearings are press-fitted into the rollers. You can specify the length of the cantilever pin in 1mm increments using additional machining (NC).
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat Shaft Double Steel Aluminum ～ Stainless Steel 25 ～ 50 Urethane 20 ～ 50 90 - Clear Anodize / Not Provided 20 ～ 50 From: 1,583,428 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- Volume Discount
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - No Shaft (Round Hole) Double - Aluminum ～ Steel - - - - - Electroless Nickel Plating / Clear Anodize / Not Provided - From: 318,343 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Single-Flanged Guide Rollers (Double Bearings) (GRL-2-L)
IMAO CORPORATION
Single-collar type guide roller (single bearing and double bearing wheels are available).[Features]· Optimal for moderate load specifications / various sliding doors and conveyor rollers.· Specifications for medium loads.- Commercial polished steel can be used for rails.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Single Flanged No Shaft (Round Hole) Single / Double Steel Plastic ～ Steel 30 ～ 70 Not Lined 12 ～ 39 - 22 ～ 46 Electroless Nickel Plating / Not Provided - From: 425,325 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
IMAO CORPORATION
[Features]• Optimal for various sliding doors and conveyor rollers.· Medium load specifications.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Tapered No Shaft (Round Hole) Single Steel Steel 22 ～ 46 Not Lined 12 ～ 28 - - Electroless Nickel Plating - From: 449,440 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
IMAO CORPORATION
Medium load specification guide roller, optimal for sliding doors or rollers for transport. (F-type single bearing)
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat No Shaft (Round Hole) Single Steel Plastic ～ Steel 22 ～ 46 Not Lined 12 ～ 28 - - Electroless Nickel Plating / Not Provided - From: 369,985 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
IMAO CORPORATION
[Features]• Optimal for various sliding doors and conveyer rollers.• Heavy duty specifications.• Compact due to U-shaped processing performed on the outer ring.• Multi-row angular bearing specifications.• The shield is double-sided.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - - - - - 16 ～ 52 - 7 ～ 20.6 - - - - From: 1,104,348 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
Bearing-based Rollers with the mount height configurable. They are suitable for guiding.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Flat Shaft Single Steel - 11 ～ 30 Not Lined - - - Black Oxide - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
A guide roller with a built-in bearing that can be used to guide various rails and workpieces. The outer diameter part is tapered. You can choose the taper angle by specifying the outer diameter and taper diameter. The material is steel (equivalent to S45C).
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Tapered No Shaft (Round Hole) Single Steel Steel 20 ～ 60 Not Lined - - - Not Provided 10 ～ 14 Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
IMAO CORPORATION
[Features]• Resistant to scratches due to surface hardening treatment.• Can be used as a guide roller R-type rail.
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) - No Shaft (Round Hole) - - - 12 ～ 16 - - - - - - From: 1,131,745 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Single-Flanged Plastic Guide Rollers (GRL-P-L-SUS)
IMAO CORPORATION
[Features]• Low noise thanks to plastic construction
Roller Type Shaft Type Bearing Bearing Material Roller Material O.D.(Ø) Lining Material L(mm) Lining Hardness(Shore A) Bottom Dia.(Ø) Surface Treatment T(mm) Single Flanged No Shaft (Round Hole) / Shaft Single Stainless Steel Plastic 22 Not Lined 6 - 18 Not Provided - From: 312,998 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Roller Type |
| Shaft Type |
| Bearing |
| Bearing Material |
| Roller Material |
| O.D.(Ø) |
| Lining Material |
| L(mm) |
| Lining Hardness(Shore A) |
| Bottom Dia.(Ø) |
| Surface Treatment |
| T(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | |
| BrandNhãn hiệu | IMAO CORPORATION | MISUMI | MISUMI | MISUMI | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | MISUMI | IMAO CORPORATION | IMAO CORPORATION | MISUMI | IMAO CORPORATION | MISUMI | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | MISUMI | MISUMI | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | MISUMI | MISUMI | IMAO CORPORATION | IMAO CORPORATION |
| Product SeriesDòng sản phẩm | Guide Rollers-V Groove/For Wire/For L Channel Track/For Wire Cable | Y Groove Guide Rollers (Double-Row Angular Contact Ball Bearing) (GRL-SWA-Y) | ||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | 488,595 VND | 264,406 VND | 108,463 VND | 747,870 VND | 567,613 VND | 481,700 VND | 456,860 VND | 1,077,060 VND | 707,508 VND | 580,109 VND | 281,700 VND | 144,203 VND | 264,406 VND | 942,810 VND | 1,636,766 VND | 285,713 VND | 312,998 VND | 959,668 VND | 1,583,428 VND | 318,343 VND | 425,325 VND | 449,440 VND | 369,985 VND | 1,104,348 VND | 1,131,745 VND | 312,998 VND | ||||
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 9 Day(s) | 9 Day(s) | 1 Day(s) or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | Same day | 6 Day(s) or more | 9 Day(s) or more | Same day or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | Same day or more | 9 Day(s) | Same day or more | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) or more |
| Roller Type | V Groove | V Groove | - | - | Round Groove | Double Flanged | Double Flanged | Round Groove | V Groove | Trapezoid Groove | Flat | Flat | Flat | Flat | V Groove | Double Flanged | - | Flat | Round Groove | Trapezoid Groove | Flat | - | Single Flanged | Tapered | Flat | - | Flat | Tapered | - | Single Flanged |
| Shaft Type | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) | Shaft | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) | - | Shaft | No Shaft (Round Hole) | No Shaft (Round Hole) | No Shaft (Round Hole) / Shaft |
| Bearing | Single | Single | Single | Single | Double | Double | Single | Single | Double | Double | Double | Single | Single | Single | Double | Single | - | Single | Single | Single | Double | Double | Single / Double | Single | Single | - | Single | Single | - | Single |
| Bearing Material | Steel / Stainless Steel | Steel | - | - | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | - | Stainless Steel | Stainless Steel | Steel | Steel | - | Steel | Steel | Steel | - | Steel | Steel | - | Stainless Steel |
| Roller Material | Plastic ～ Steel | Aluminum ～ Steel | - | - | Steel | Steel | Plastic ～ Steel | Plastic ～ Steel | Steel | Stainless Steel ～ Steel | Aluminum ～ Steel | Plastic | Plastic | Aluminum ～ Steel | Steel | Aluminum ～ Steel | - | Plastic | Plastic | Steel | Aluminum ～ Stainless Steel | Aluminum ～ Steel | Plastic ～ Steel | Steel | Plastic ～ Steel | - | - | Steel | - | Plastic |
| O.D.(Ø) | 30 ～ 70 | 20 ～ 100 | - | 20 ～ 100 | 40 ～ 70 | 30 ～ 70 | 30 ～ 70 | 30 ～ 70 | 50 ～ 70 | 30 ～ 70 | 20 ～ 50 | 13 ～ 35 | 20 ～ 60 | 30 ～ 100 | 50 ～ 70 | 15 ～ 60 | 40 ～ 60 | 13 ～ 35 | 22 | 50 ～ 60 | 25 ～ 50 | - | 30 ～ 70 | 22 ～ 46 | 22 ～ 46 | 16 ～ 52 | 11 ～ 30 | 20 ～ 60 | 12 ～ 16 | 22 |
| Lining Material | Not Lined | Not Lined | - | - | Not Lined | Not Lined | Not Lined | Not Lined | Not Lined | Not Lined | Not Lined | Not Lined | Polyurethane | Not Lined | Not Lined | Not Lined | - | Not Lined | Not Lined | Not Lined | Urethane | - | Not Lined | Not Lined | Not Lined | - | Not Lined | Not Lined | - | Not Lined |
| L(mm) | 12 ～ 28 | - | - | - | 23 ～ 39 | 18 ～ 39 | 12 ～ 28 | 12 ～ 28 | 21 ～ 28 | 18 ～ 39 | 20 ～ 50 | 5 ～ 9 | 8 ～ 15 | - | 27 ～ 39 | - | 7 ～ 10 | 5 ～ 9 | 6 | 19 ～ 23 | 20 ～ 50 | - | 12 ～ 39 | 12 ～ 28 | 12 ～ 28 | 7 ～ 20.6 | - | - | - | 6 |
| Lining Hardness(Shore A) | - | - | - | - | - | - | - | - | - | - | - | - | 95 | - | - | - | - | - | - | - | 90 | - | - | - | - | - | - | - | - | - |
| Bottom Dia.(Ø) | - | 12 ～ 88 | - | 14 ～ 88 | - | 22 ～ 46 | 22 ～ 46 | 22 ～ 51 | - | 22 ～ 46 | - | - | - | - | 32 ～ 41 | - | - | - | - | 40 ～ 47 | - | - | 22 ～ 46 | - | - | - | - | - | - | 18 |
| Surface Treatment | Electroless Nickel Plating / Not Provided | Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided | Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided | Electroless Nickel Plating / Black Oxide / Not Provided | Electroless Nickel Plating | Electroless Nickel Plating | Electroless Nickel Plating / Black Oxide / Not Provided | Electroless Nickel Plating / Black Oxide / Not Provided | Electroless Nickel Plating | Electroless Nickel Plating / Black Oxide / Not Provided | Electroless Nickel Plating / Clear Anodize / Not Provided | Not Provided | Not Provided | Electroless Nickel Plating / Clear Anodize / Black Oxide / Not Provided | Electroless Nickel Plating | Clear Anodize / Not Provided | - | Not Provided | Not Provided | Black Oxide | Clear Anodize / Not Provided | Electroless Nickel Plating / Clear Anodize / Not Provided | Electroless Nickel Plating / Not Provided | Electroless Nickel Plating | Electroless Nickel Plating / Not Provided | - | Black Oxide | Not Provided | - | Not Provided |
| T(mm) | - | 10 ～ 20 | 10 ～ 16 | 10 ～ 16 | - | 10 ～ 28 | 5 ～ 17 | - | - | - | 20 ～ 50 | - | - | 12 ～ 16 | - | 9 ～ 14 | - | - | - | - | 20 ～ 50 | - | - | - | - | - | - | 10 ～ 14 | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Roller Type
-
Shaft Type
-
Bearing
-
Bearing Material
-
Roller Material
-
O.D.(Ø)
-
Lining Material
-
L(mm)
-
Lining Hardness(Shore A)
-
Bottom Dia.(Ø)
-
Surface Treatment
-
T(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy