(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more
Spur Gears
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
119 itemsMặt hàng
- Sort By
-
Recommended
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 1.0
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 58 Shape A / Shape B / Shape K 12 ～ 120 - 6 ～ 12 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - -
Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 2.0
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole can also be machined with inner diameter dimensions, keyways, stepped holes, etc.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 55 Shape A / Shape B 12 ～ 100 - 20 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear, Pressure Angle 20°, Module 1.0
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 58 Shape A / Shape B / Shape K 12 ～ 120 1 6 ～ 12 General Steel Material / Stainless Steel Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 Not Provided - Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Without boss for weight reduction, with solid shape tooth face width 10 times larger than the module. Material costs reduced, for a reasonably priced spur gear. Black dyeing treatment applied to prevent rust.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 50 Shape A 20 ～ 120 1 ～ 5 10 ～ 50 General Steel Material Black Oxide Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole / Keyway From: 155,513 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
The low cost, highly applicable spur gear offers a wide variety of modules, the number of tooth, etc.[Features]·With S45C steel and JIS N8 class accuracy, this spur gear is reasonable and offers the widest variety among standard gears.·Black oxide coating has been applied as rust prevention.·The variation includes from fine pitch to large modules, which is Module 0.5 to 10 or the tooth quantity of 12 to 200 sheets.[Application]·Ideal for general industrial machines such as machine tools, conveyors, and lifting devices.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 3 ～ 70 Shape B / Shape K 12 ～ 200 0.5 ～ 10 5 ～ 90 General Steel Material Black Oxide Not Provided Not Provided / Provided Not Provided Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 145,769 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 1.5
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 54 Shape A / Shape B / Shape K 12 ～ 120 - 15 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears- Induction Hardened, Pressure Angle 20°
MISUMI
[Features] Due to induction hardening of the teeth, the tooth surface strength is approximately 5 times that of regular products! We also added tooth polishing to achieve high precision gears. Additional machining of boss set screws and side mounting holes is also available.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 56 Shape A / Shape B 15 ～ 100 - 8 ～ 30 - Black Oxide High Frequency Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear, Pressure Angle 20°, Module 2.0
MiSUMi EconomyMISUMI
- Volume Discount
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 52 Shape A / Shape B 12 ～ 77 2 20 General Steel Material / Stainless Steel Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H8 Not Provided - Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear Module 1.0 Pressure Angle 20 Degrees
MiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - - - - - - - - - - - - - - From: 59,487 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear, Pressure Angle 20°, Module 1.5
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 50 Shape A / Shape B / Shape K 12 ～ 100 1.5 15 General Steel Material / Stainless Steel Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H8 Not Provided - Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plastic - Spur Gears, Pressure Angle 20°
MISUMI
[Features] A spur gear whose shaft hole diameter can be specified in 1mm increments. It is now possible to select polyacetal blue, which is easy to use in the food industry and areas that are washed with water. In order to save space, we have added a thin width product with a shorter overall length than before. [Material] MC nylon, polyacetal white/blue[Hole shape] No cored metal, with cored metal (S45C equivalent, SUS304)Additionally, various additional machining options are available to create your desired gear You can choose.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 3 ～ 56 Shape A / Shape B / Shape K 12 ～ 120 - 2 ～ 30 - Not Provided Not Provided Not Provided Not Provided Provided H7 Not Provided / Provided (S45C) / Provided (SUS303) - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear, Pressure Angle 20°, Module 2.5
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 60 Shape A / Shape B 12 ～ 60 2.5 25 General Steel Material Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H8 Not Provided - Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 3.0
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 70 Shape A / Shape B 12 ～ 70 - 30 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
This is a lightweight solid shape spur gear obtained by cutting the boss part of an SSG ground spur gear.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 80 Shape A 15 ～ 50 1 ～ 6 10 ～ 60 General Steel Material Black Oxide High Frequency Provided Not Provided Provided H7 - Round hole / Keyway From: 700,711 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears - Tooth Width/Hub Dimension Configurable, Pressure Angle 20°
MISUMI
[Features]Spur gear tooth width and boss dimensions can be specified in 1mm increments. Resin materials (MC nylon, polyacetal white/blue) can now be selected! [Material] S45C equivalent, SUS304, MC nylon, polyacetal white/blue[Surface treatment] Triiron tetroxide film, electroless nickel plating (S45C equivalent only)Various additions as options You can select the gear you want at our factory.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 1 ～ 40 Shape A / Shape B 12 ～ 120 - 2 ～ 35 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Spur gear that is treated with induction hardening on the tooth surface is available for alteration.[Features]·Made of S45C steel, treated with induction hardening on the tooth surface, and ground using holes as reference.·Reasonable tooth grind spur gear that offers JIS N7 class accuracy.[Application]·Ideal for general industrial machines such as machine tools, conveyors, and lifting devices.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 80 Shape B 14 ～ 120 1 ～ 6 8 ～ 60 General Steel Material Black Oxide High Frequency Provided Not Provided Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 709,960 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SUS303 stainless steel CP spur gear. Use in rust intolerant machines, such as food machinery, or to make the one revolution moving distance of the pinion as an opposing gear of the CP rack an integer length of 100, 150 etc.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 45 Shape B 20 ～ 30 1.5915 ～ 3.1831 15 ～ 30 General Steel Material / Stainless Steel Not Provided Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 739,665 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyStraight Gear, Pressure Angle 20°, Module 0.5
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - Shape A / Shape B / Shape K 15 ～ 120 0.5 2 ～ 8 General Steel Material / Stainless Steel Not Provided / Black Oxide Not Provided - - - H7 - - Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
MC901 made, accuracy JIS N9 grade plastic spur gear that is lightweight and can be used without lubrication.[Features]・ MC901 made, accuracy JIS N9 grade plastic spur gear.・ High-performance plastic gear made of MC nylon that can be used without lubrication, and is ideal for food machines.[Applications]・ Except for general industrial machines. Convenient for food machines, ticket gates, sushi robots, auto setters, etc.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 40 Shape B 12 ～ 100 1 ～ 3 10 ～ 30 Plastic Not Provided Not Provided Not Provided - Provided - Not Provided Round hole / Round hole+tap / Keyway + Tap From: 206,988 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear Pressure Angle 20° Module 3.0
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - Shape A / Shape B 12 ～ 50 3 30 General Steel Material / Stainless Steel Not Provided / Black Oxide Not Provided - - - H7 - - Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spur Gears - Bearing Built-In, Pressure Angle 20°
MISUMI
[Features] This is a Misumi original spur gear with a bearing built into the gear. Achieved an inexpensive structure with no need for bearing holders on both sides of the shaft! This product has smooth rotation and is effective in reducing friction and noise. [Bearing accuracy] JIS B 1514 class 0 (bearings are press-fitted) This product has smooth idle rotation and is effective in reducing friction and noise. Stainless steel bearings, stainless steel body materials, and polyacetal (white/blue) have been added!
- Volume Discount
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - Shape A / Shape B 15 ～ 60 - 12 ～ 20 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Provided Provided - Not Provided - From: 612,222 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 2.5
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 60 Shape A / Shape B 12 ～ 80 - 25 - Not Provided / Black Oxide Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless Hub - Spur Gears, Pressure Angle 20°
MISUMI
[Features]Misumi's original surface pressure spur gears make it easy to adjust the assembly position of the rotating body! Easy and strong fixation by simply tightening the shaft and gear with bolts. Friction fastening eliminates the need for machining keyways etc. on the shaft side!
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 50 Shape A / Shape B 12 ～ 120 - 10 ～ 30 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pilot Hole - Spur Gears, Pressure Angle 20°
MISUMI
- Volume Discount
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - Shape B 20 ～ 120 - 2 ～ 30 - Black Oxide Not Provided Not Provided Not Provided Provided H7 - - From: 273,427 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 0.5
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 3 ～ 16 Shape A / Shape B / Shape K 15 ～ 120 - 2 ～ 8 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
This is a lightweight better shape spur gear obtained by cutting SS spur gear boss part. Finished J and F series products are also available.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 10 ～ 80 Shape A 15 ～ 60 2 ～ 5 20 ～ 50 General Steel Material Black Oxide Not Provided Provided Not Provided Provided H7 - Keyway From: 391,401 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
Large range of number of teeth available to choose according to application.
- CAD ：
- 2D
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 10 ～ 35 Shape A 12 ～ 120 - 10 ～ 60 General Steel Material Black Oxide - Provided Not Provided Provided H7 Not Provided Round hole From: 160,896 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
MC901 made, precision JISN9 grade plastic spur gear, in solid shape for material cost savings. High-performance plastic gear that can be used without lubrication.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 12 ～ 50 Shape A 32 ～ 100 2 ～ 3 20 ～ 30 Plastic Not Provided Not Provided Not Provided - Provided - Not Provided Round hole / Keyway From: 610,570 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
A flat spur gear where the boss of the SS flat gear is cut to reduce weight. Finished J and F Series products are also available.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 10 ～ 20 Shape A 15 ～ 18 2 ～ 5 20 ～ 50 - Black Oxide Not Provided Not Provided - Provided - - - From: 236,588 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomySpur Gear Pressure Angle 20° Module 0.8
MiSUMi EconomyMISUMI
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. - Shape A / Shape B / Shape K 12 ～ 50 0.8 5 ～ 7 General Steel Material / Stainless Steel Not Provided / Black Oxide Not Provided - - - H7 - - Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Thin single boss type spur gear, with narrow tooth face designed for light loads.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 5 ～ 29 Shape B 12 ～ 120 0.8 ～ 1 4 ～ 6 General Steel Material Black Oxide Not Provided Not Provided - Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 139,010 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spur Gears, Pressure Angle 20° , Module 0.8
MISUMI
[Features] Spur gears can be selected from a large number of teeth, and the shaft hole also has various inner diameter dimensions, keyways, stepped holes, etc. We will process it and deliver it to you.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 4 ～ 9 Shape A / Shape B / Shape K 12 ～ 50 - 5 ～ 7 - Not Provided / Black Oxide / Electroless Nickel Plating Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Choose from a rich selection of hole diameters, face widths (light load / heavy load), and shapes A type (without hub), B type (with hub) etc.[Many hole diameter dimensions]
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 5 ～ 50 Shape A / Shape B / Shape K / Shaft 8 ～ 120 1 6 ～ 12 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided Not Specified / H7 / H8 - Round hole / Round hole+tap / Keyway / Keyway + Tap From: 116,378 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Duracon material® (M90-44), precision JISN12 grade molded spur gear.Sizes are M0.5 to 1, in injection molded, low-cost gear.Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 2 ～ 8 Shape B 12 ～ 80 0.5 ～ 1 3 ～ 6 Plastic Not Provided Not Provided Not Provided - Provided - Not Provided Round hole From: 52,910 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
CP spur gear with a wide pitch selection (from CP2.5 to 20), number of teeth etc. Use as a counter gear in CP rack when setting pinion one rotation movement amount, to integer lengths such as 50, 100, 150 etc.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 6 ～ 45 Shape B 20 ～ 40 0.7958 ～ 6.3662 10 ～ 60 General Steel Material Black Oxide Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 281,068 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Spur Gear, Gear Module 4
SANKOSEISAKUSHO
Modules with commonly used numbers of teeth are available, from 12T up to 80T. Standard products are used for speed ratio combination as well. The manufacturer can also provide additional machining such as shaft hole and key machining.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 18 ～ 28 Shape B 12 ～ 80 4 40 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole From: 444,506 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spur Gear Module 0.75 S45C Type
KYOUIKU GEAR MFG（KG）
Module 0.75 small module spur gear.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 5 ～ 8 Shape B / Shape K 10 ～ 120 0.75 6 ～ 8 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided H8 - Round hole+tap From: 146,723 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Space-saving, lighter weight spur gear with module 3.0 and a pressure angle of 20° (full depth tooth) and, made of S45C material [Features]·KG standard comes in parallel width (for light loads) and wide width (for heavy loads), selectable according to your application.· Gear precision grade is JIS B 1702-1 (ISO) Grade 8 (Gear induction hardened part: Grade 9).· Shape A: without hub, B: with single hub, BF: additional expansion product with single hub.· For shaft fastening, "-" is without keyway or screw, "=" is with keyway and "#" is with keyway, screw hole, key material and screw.· Space-saving, lighter, no need for fastening (=, #).· Products with "H" added to the suffix are gear induction hardened. Holes are not modified after hardening for HRC 47 to 53. [Applications]· Equipment power transmission, drive and transport parts.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 16 ～ 25 Shape A / Shape B 14 ～ 60 3 20 ～ 35 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided Not Specified / H7 - Round hole From: 337,767 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SUS303 material stainless steel for corrosion-resistant spur gear. Ideal for rust intolerant applications, such as food machinery, chemical machinery, electronic equipment, clean rooms, etc.,
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 50 Shape B / Shape K 15 ～ 120 1 ～ 4 10 ～ 40 Stainless Steel Not Provided Not Provided Not Provided - Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 381,439 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Standard Spur Gear, Gear Module 3
SANKOSEISAKUSHO
Modules with commonly used numbers of teeth are available, from 12T up to 80T. Standard products are used for speed ratio combination as well. The manufacturer can also provide additional machining such as shaft hole and key machining.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 13 ～ 28 Shape B 12 ～ 80 3 30 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole From: 293,508 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Bonded Plastic - Spur Gears, Pressure Angle 20°
MISUMI
Plastic gears with metal cores and MC nylon teeth are fusion bonded. Best suited when strong mounting to shafts is desired.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 30 Shape B 16 ～ 75 - 10 ～ 30 - Not Provided Not Provided Not Provided Not Provided Provided H7 - - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Module 0.5 small module spur gear. Directly mountable tapped in 2 points, machined product also available.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 3 ～ 22 Shape B / Shape K 10 ～ 120 0.5 5 ～ 10 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided H7 / H8 - Round hole / Round hole+tap From: 146,508 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Choose from a rich selection of hole diameters, face widths (light load / heavy load), and shapes A type (without hub), B type (with hub) etc.[Many hole diameter dimensions]
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 5 ～ 50 Shape A / Shape B / Shape K / Shaft 8 ～ 100 1.5 10 ～ 18 General Steel Material Not Provided Not Provided Not Provided Not Provided Provided Not Specified / H7 / H8 - Round hole / Round hole+tap / Keyway / Keyway + Tap From: 139,068 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Teeth part is MC602ST, with boss part made of S45C fused, with slotted keyway, and tapping etc. for improved safety. High performance plastic gear, so non-lubricated with high-torque.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 8 ～ 40 Shape B 18 ～ 100 1 ～ 3 10 ～ 30 Plastic Not Provided Not Provided Not Provided Not Provided Provided H7 Not Provided Round hole / Round hole+tap / Keyway + Tap From: 2,435,978 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
S45C made spur gear with thermally shaft to improve strength. Difficult to machine small teeth number gears produced as shaft attached gear, with shaft part machined to high precision.
Shaft Bore Dia., Shaft Dia. d(Ø) Gear Shape Number of Teeth(Teeth) Module Tooth Width B(mm) Material Surface Treatment Heat Treatment Ground Tooth Bearing Backlash Shaft Bore Tolerance Metal Bushing Shaft Bore Config. 12 ～ 15.2 Shaft 10 ～ 13 1 ～ 1.5 12 ～ 15 General Steel Material Black Oxide Not Provided Not Provided - Provided Not Specified Not Provided - From: 391,193 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Shaft Bore Dia., Shaft Dia. d(Ø) |
| Gear Shape |
| Number of Teeth(Teeth) |
| Module |
| Tooth Width B(mm) |
| Material |
| Surface Treatment |
| Heat Treatment |
| Ground Tooth |
| Bearing |
| Backlash |
| Shaft Bore Tolerance |
| Metal Bushing |
| Shaft Bore Config. |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KOHARA GEAR INDUSTRY | MISUMI | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | MISUMI | KOHARA GEAR INDUSTRY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KOHARA GEAR INDUSTRY | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | MISUMI | KOHARA GEAR INDUSTRY | MISUMI | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | SANKOSEISAKUSHO | KYOUIKU GEAR MFG（KG） | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | SANKOSEISAKUSHO | MISUMI | KYOUIKU GEAR MFG（KG） | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY |
| Product SeriesDòng sản phẩm | Spur Gears - Tooth Width/Hub Dimension Configurable, Pressure Angle 20° | ||||||||||||||||||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| From | 155,513 VND | 145,769 VND | 59,487 VND | 700,711 VND | 709,960 VND | 739,665 VND | 206,988 VND | 612,222 VND | 273,427 VND | 391,401 VND | 160,896 VND | 610,570 VND | 236,588 VND | 139,010 VND | 116,378 VND | 52,910 VND | 281,068 VND | 444,506 VND | 146,723 VND | 337,767 VND | 381,439 VND | 293,508 VND | 146,508 VND | 139,068 VND | 2,435,978 VND | 391,193 VND | |||||||||||||||||||
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 6 Day(s) | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 15 Day(s) | 4 Day(s) or more | 15 Day(s) | Same day or more | 6 Day(s) or more | 11 Day(s) | Same day or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 15 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shaft Bore Dia., Shaft Dia. d(Ø) | 6 ～ 58 | 8 ～ 55 | 6 ～ 58 | 8 ～ 50 | 3 ～ 70 | 6 ～ 54 | 6 ～ 56 | 8 ～ 52 | - | 6 ～ 50 | 3 ～ 56 | 8 ～ 60 | 8 ～ 70 | 8 ～ 80 | 1 ～ 40 | 6 ～ 80 | 8 ～ 45 | - | 6 ～ 40 | - | - | 8 ～ 60 | 8 ～ 50 | - | 3 ～ 16 | 10 ～ 80 | 10 ～ 35 | 12 ～ 50 | 10 ～ 20 | - | 5 ～ 29 | 4 ～ 9 | 5 ～ 50 | 2 ～ 8 | 6 ～ 45 | 18 ～ 28 | 5 ～ 8 | 16 ～ 25 | 8 ～ 50 | 13 ～ 28 | 8 ～ 30 | 3 ～ 22 | 5 ～ 50 | 8 ～ 40 | 12 ～ 15.2 |
| Gear Shape | Shape A / Shape B / Shape K | Shape A / Shape B | Shape A / Shape B / Shape K | Shape A | Shape B / Shape K | Shape A / Shape B / Shape K | Shape A / Shape B | Shape A / Shape B | - | Shape A / Shape B / Shape K | Shape A / Shape B / Shape K | Shape A / Shape B | Shape A / Shape B | Shape A | Shape A / Shape B | Shape B | Shape B | Shape A / Shape B / Shape K | Shape B | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B | Shape B | Shape A / Shape B / Shape K | Shape A | Shape A | Shape A | Shape A | Shape A / Shape B / Shape K | Shape B | Shape A / Shape B / Shape K | Shape A / Shape B / Shape K / Shaft | Shape B | Shape B | Shape B | Shape B / Shape K | Shape A / Shape B | Shape B / Shape K | Shape B | Shape B | Shape B / Shape K | Shape A / Shape B / Shape K / Shaft | Shape B | Shaft |
| Number of Teeth(Teeth) | 12 ～ 120 | 12 ～ 100 | 12 ～ 120 | 20 ～ 120 | 12 ～ 200 | 12 ～ 120 | 15 ～ 100 | 12 ～ 77 | - | 12 ～ 100 | 12 ～ 120 | 12 ～ 60 | 12 ～ 70 | 15 ～ 50 | 12 ～ 120 | 14 ～ 120 | 20 ～ 30 | 15 ～ 120 | 12 ～ 100 | 12 ～ 50 | 15 ～ 60 | 12 ～ 80 | 12 ～ 120 | 20 ～ 120 | 15 ～ 120 | 15 ～ 60 | 12 ～ 120 | 32 ～ 100 | 15 ～ 18 | 12 ～ 50 | 12 ～ 120 | 12 ～ 50 | 8 ～ 120 | 12 ～ 80 | 20 ～ 40 | 12 ～ 80 | 10 ～ 120 | 14 ～ 60 | 15 ～ 120 | 12 ～ 80 | 16 ～ 75 | 10 ～ 120 | 8 ～ 100 | 18 ～ 100 | 10 ～ 13 |
| Module | - | - | 1 | 1 ～ 5 | 0.5 ～ 10 | - | - | 2 | - | 1.5 | - | 2.5 | - | 1 ～ 6 | - | 1 ～ 6 | 1.5915 ～ 3.1831 | 0.5 | 1 ～ 3 | 3 | - | - | - | - | - | 2 ～ 5 | - | 2 ～ 3 | 2 ～ 5 | 0.8 | 0.8 ～ 1 | - | 1 | 0.5 ～ 1 | 0.7958 ～ 6.3662 | 4 | 0.75 | 3 | 1 ～ 4 | 3 | - | 0.5 | 1.5 | 1 ～ 3 | 1 ～ 1.5 |
| Tooth Width B(mm) | 6 ～ 12 | 20 | 6 ～ 12 | 10 ～ 50 | 5 ～ 90 | 15 | 8 ～ 30 | 20 | - | 15 | 2 ～ 30 | 25 | 30 | 10 ～ 60 | 2 ～ 35 | 8 ～ 60 | 15 ～ 30 | 2 ～ 8 | 10 ～ 30 | 30 | 12 ～ 20 | 25 | 10 ～ 30 | 2 ～ 30 | 2 ～ 8 | 20 ～ 50 | 10 ～ 60 | 20 ～ 30 | 20 ～ 50 | 5 ～ 7 | 4 ～ 6 | 5 ～ 7 | 6 ～ 12 | 3 ～ 6 | 10 ～ 60 | 40 | 6 ～ 8 | 20 ～ 35 | 10 ～ 40 | 30 | 10 ～ 30 | 5 ～ 10 | 10 ～ 18 | 10 ～ 30 | 12 ～ 15 |
| Material | - | - | General Steel Material / Stainless Steel | General Steel Material | General Steel Material | - | - | General Steel Material / Stainless Steel | - | General Steel Material / Stainless Steel | - | General Steel Material | - | General Steel Material | - | General Steel Material | General Steel Material / Stainless Steel | General Steel Material / Stainless Steel | Plastic | General Steel Material / Stainless Steel | - | - | - | - | - | General Steel Material | General Steel Material | Plastic | - | General Steel Material / Stainless Steel | General Steel Material | - | General Steel Material | Plastic | General Steel Material | General Steel Material | General Steel Material | General Steel Material | Stainless Steel | General Steel Material | - | General Steel Material | General Steel Material | Plastic | General Steel Material |
| Surface Treatment | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | - | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Not Provided | Not Provided / Black Oxide | Not Provided | Not Provided / Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Black Oxide | Black Oxide | Not Provided | Black Oxide | Not Provided / Black Oxide | Black Oxide | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide |
| Heat Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Frequency | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | High Frequency | Not Provided | High Frequency | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Ground Tooth | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Provided | Not Provided | Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | - | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Bearing | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
| Backlash | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | Provided | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided |
| Shaft Bore Tolerance | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H8 | - | H8 | H7 | H8 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 | - | - | H7 | H7 | H7 | Not Specified / H7 / H8 | - | H7 | H7 | H8 | Not Specified / H7 | H7 | H7 | H7 | H7 / H8 | Not Specified / H7 / H8 | H7 | Not Specified |
| Metal Bushing | - | - | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided / Provided (S45C) / Provided (SUS303) | Not Provided | - | - | - | Not Provided | Not Provided | - | Not Provided | - | Not Provided | - | - | - | - | - | Not Provided | Not Provided | - | - | Not Provided | - | - | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided |
| Shaft Bore Config. | - | - | - | Round hole / Keyway | Round hole / Round hole+tap / Keyway + Tap | - | - | - | - | - | - | - | - | Round hole / Keyway | - | Round hole / Round hole+tap / Keyway + Tap | Round hole / Round hole+tap / Keyway + Tap | - | Round hole / Round hole+tap / Keyway + Tap | - | - | - | - | - | - | Keyway | Round hole | Round hole / Keyway | - | - | Round hole / Round hole+tap / Keyway + Tap | - | Round hole / Round hole+tap / Keyway / Keyway + Tap | Round hole | Round hole / Round hole+tap / Keyway + Tap | Round hole | Round hole+tap | Round hole | Round hole / Round hole+tap / Keyway + Tap | Round hole | - | Round hole / Round hole+tap | Round hole / Round hole+tap / Keyway / Keyway + Tap | Round hole / Round hole+tap / Keyway + Tap | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Shaft Bore Dia., Shaft Dia. d(Ø)
[3-70/1Ø Unit(s)]
-
Gear Shape
-
Number of Teeth(Teeth)
-
Module
-
Tooth Width B(mm)
-
Material
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Heat Treatment
- Not Provided
- High Frequency
- Others
-
Ground Tooth
- Not Provided
- Provided
-
Bearing
- Provided
- Not Provided
-
Backlash
- Not Provided
- Provided
-
Shaft Bore Tolerance
-
Metal Bushing
-
Shaft Bore Config.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy