Pneumatic Clamps

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Clamp - Pneumatic Type

  KJF

  [Description] Flange type Rotary Joints are index of Tapping center & Vertical Machining center Convenient for Fixture and fixture of Horizontal Machining center

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 4,375,998 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s)

  11 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hinge Clamp - Pneumatic Type

  KJF

  [Description] · Operates with Pneumatic Pressure and is used for small clamping force. It is fixed and returned by air pressure in double operation. Easy Installation with Screwed Body Internal Diameter Range: Ø15 to 50 Working Pressure: 3 to 9.9 kgf/cm2 Operating temperature: 0 to 60°C Fasten Bolts in fixed state when Assembling Levers

  • Volume Discount

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 4,089,832 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s)

  11 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Push-Pull Type - Cylinder 60x100 (ST) / Tightening Pressure 1200 kg

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 7,208,738 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Vertical Type - Cylinder 20x25(ST)

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 2,640,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type AC650-S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·Multiple air clamps can be operated at the same time, increasing work efficiency.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the standard fitting, remove the joint once and remove the remaining seal tape. please give me.If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 9,202,527 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Welding Type - Cylinder 40x100 (ST) / Clamping Pressure 1000 kg

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 5,168,135 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Push-Pull Type - Cylinder 32x50 (ST) / Tightening Pressure 180 kg

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 3,485,599 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp Holder Type

  KAKUTA

  [Features]- Clamp operation and conditions can be checked on-site, enabling proper maintenance checks.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  2	Steel

  From: 5,271,406 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  SUPER TOOL Hold-Down Pneumatic Variable Clamps

  SUPER TOOL

  ● A hold-down type variable clamp (TDB1F) is used in the main body. Suitable for frequently operated pneumatic systems.● Setting up multiple units can improve operating efficiency.● Optimal for inspection, welding, assembly, and machining jigs.

  Holding Capacity(kN)	Clamp Material
  2.5 ～ 2.8	Steel

  From: 7,570,752 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type NO.501S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·Multiple air clamps can be operated at the same time, increasing work efficiency.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the joint that is installed as standard, remove the joint and remove the remaining seal tape. please give me. .If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  5	Steel

  From: 20,636,867 VND
  Days to Ship: Số ngày giao hàng: 74 Day(s) or more

  74 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Clamp Strong Durability Series PPC.

  ELESA

  [Features] •Materials Weldable Galvanized Steel. •Body Black Coated Spheroidal Cast Iron. •Socket Head Screws for Cylinder Support Black-Oxide Steel. •Related keywords: ELESA, Pneumatic Clamp, Toggle Clamp

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 48,423,082 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s)

  13 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Weld Type - Cylinder 32x75 (ST)

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 4,330,336 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic toggle clamp welding type - cylinder 40x100 (ST) / clamping pressure 450 kg

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 5,199,469 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Weld Type - Cylinder 60x100 (ST)

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 7,066,806 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp Lower-Holding Type NO.501

  KAKUTA

  - Manually operated identically to Burr Air Clamp NO.500.- The main body uses the highly durable Burr Air Clamp No. 2, and the cylinder is placed vertically to save space.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  5	Steel

  From: 9,869,617 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type NO.AC-450-S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·When used for processing inside a machine or for processing large workpieces, work efficiency can be increased.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the standard fitting, remove the joint once and remove the remaining seal tape. please give me.If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  1.6	Steel

  From: 7,937,634 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type NO.AC-451S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·When used for processing inside a machine or for processing large workpieces, work efficiency can be increased.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the standard fitting, remove the joint once and remove the remaining seal tape. please give me.If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 7,808,807 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Bottom Surface Clamp Model NO. AC200-S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·Multiple air clamps can be operated at the same time, increasing work efficiency.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the joint that is installed as standard, remove the joint and remove the remaining seal tape. please give me. .If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  2	Steel

  From: 10,863,796 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vise Clamp

  KJF

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 8,831,529 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Push-Pull Type - Cylinder 32x (ST)

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 4,330,336 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Toggle Clamp Push-Pull Type - Cylinder 40x75 (ST)

  KJF

  [Description] · It is a Toggle Clamp that fixes a workpiece that generates a large force with even small force.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 5,623,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hold-Down Pneumatic Clamp, No. 500

  KAKUTA

  [Features]· Clamping status can be operationally checked on-site to enable maintenance and inspection of precise work.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  4	Steel

  From: 11,019,989 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type NO.56-S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·Multiple air clamps can be operated at the same time, increasing work efficiency.·The clamping force is 1.5 kN.·Air connection is R/RC1/8.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  1.5	Steel

  From: 7,784,254 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Air Clamp S Series Hold-Down Type NO.201-S

  KAKUTA

  Lower presser type air driven toggle clamp.[Features]·Multiple air clamps can be operated at the same time, increasing work efficiency.·With sensor.[Applications]·Incorporation into automated equipment.·For machining inside machines and large workpieces, etc.[Precautions for use]* When changing the direction of the joint When changing the direction of the standard fitting, remove the joint once and remove the remaining seal tape. please give me.If you change the direction while it is installed, it may cause air leakage.* When using the product in a place subject to high temperatures, take measures such as applying heat shielding to the air cylinder.Insufficient heat shielding may cause the packing inside the air cylinder to melt and cause air leakage.* Depending on the operating conditions (ambient temperature of 40°C or higher, pressure maintenance, low frequency operation, etc.), the internal lubricating oil and grease base oil may seep out of the cylinder. Please be careful when a clean environment is required.

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  2.8	Steel

  From: 11,676,381 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pneumatic Clamp Strong Durability Series PPD.

  ELESA

  [Features] •Materials Weldable Galvanized Steel. •Body Black Coated Spheroidal Cast Iron. •Socket Head Screws for Cylinder Support Black-Oxide Steel. •Related keywords: ELESA, Pneumatic Clamp, Toggle Clamp

  CAD ：

  2D / 3D

  Holding Capacity(kN)	Clamp Material
  -	-

  From: 50,712,412 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s)

  13 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Holding Capacity(kN)
Clamp Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KJF	KJF	KJF	KJF	KAKUTA	KJF	KJF	KAKUTA	SUPER TOOL	KAKUTA	ELESA	KJF	KJF	KJF	KAKUTA	KAKUTA	KAKUTA	KAKUTA	KJF	KJF	KJF	KAKUTA	KAKUTA	KAKUTA	ELESA
Product SeriesDòng sản phẩm	Swing Clamp - Pneumatic Type	Hinge Clamp - Pneumatic Type	Pneumatic Toggle Clamp Push-Pull Type - Cylinder 60x100 (ST) / Tightening Pressure 1200 kg	Pneumatic Toggle Clamp Vertical Type - Cylinder 20x25(ST)	Air Clamp S Series Hold-Down Type AC650-S	Pneumatic Toggle Clamp Welding Type - Cylinder 40x100 (ST) / Clamping Pressure 1000 kg	Pneumatic Toggle Clamp Push-Pull Type - Cylinder 32x50 (ST) / Tightening Pressure 180 kg	Air Clamp Holder Type	SUPER TOOL Hold-Down Pneumatic Variable Clamps	Air Clamp S Series Hold-Down Type NO.501S	Pneumatic Clamp Strong Durability Series PPC.	Pneumatic Toggle Clamp Weld Type - Cylinder 32x75 (ST)	Pneumatic toggle clamp welding type - cylinder 40x100 (ST) / clamping pressure 450 kg	Pneumatic Toggle Clamp Weld Type - Cylinder 60x100 (ST)	Air Clamp Lower-Holding Type NO.501	Air Clamp S Series Hold-Down Type NO.AC-450-S	Air Clamp S Series Hold-Down Type NO.AC-451S	Air Clamp S Series Bottom Surface Clamp Model NO. AC200-S	Vise Clamp	Pneumatic Toggle Clamp Push-Pull Type - Cylinder 32x (ST)	Pneumatic Toggle Clamp Push-Pull Type - Cylinder 40x75 (ST)	Hold-Down Pneumatic Clamp, No. 500	Air Clamp S Series Hold-Down Type NO.56-S	Air Clamp S Series Hold-Down Type NO.201-S	Pneumatic Clamp Strong Durability Series PPD.
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	4,375,998 VND	4,089,832 VND	7,208,738 VND	2,640,548 VND	9,202,527 VND	5,168,135 VND	3,485,599 VND	5,271,406 VND	7,570,752 VND	20,636,867 VND	48,423,082 VND	4,330,336 VND	5,199,469 VND	7,066,806 VND	9,869,617 VND	7,937,634 VND	7,808,807 VND	10,863,796 VND	8,831,529 VND	4,330,336 VND	5,623,958 VND	11,019,989 VND	7,784,254 VND	11,676,381 VND	50,712,412 VND
Days to ShipSố ngày giao hàng	11 Day(s)	11 Day(s)	6 Day(s)	6 Day(s)	14 Day(s) or more	6 Day(s)	6 Day(s)	Same day	6 Day(s) or more	74 Day(s) or more	13 Day(s)	6 Day(s)	6 Day(s)	6 Day(s)	8 Day(s) or more	4 Day(s) or more	8 Day(s)	6 Day(s) or more	Quote	6 Day(s)	6 Day(s)	Same day	8 Day(s) or more	12 Day(s) or more	13 Day(s)
Holding Capacity(kN)	-	-	-	-	-	-	-	2	2.5 ～ 2.8	5	-	-	-	-	5	1.6	-	2	-	-	-	4	1.5	2.8	-
Clamp Material	-	-	-	-	-	-	-	Steel	Steel	Steel	-	-	-	-	Steel	Steel	-	Steel	-	-	-	Steel	Steel	Steel	-

Loading...Tải…