What are ball plungers used for?

Ball plungers are tiny tools used in different areas to help with precise positioning or locking. They have a spring-loaded ball inside a housing. When the ball is pressed, it extends, and when released, it retracts. They are commonly found in industries like manufacturing and electronics. They are useful for tasks such as aligning parts, holding them in place, or creating a detent mechanism for secure positioning.

What material is ball plunger?

Ball plungers are usually made from different materials depending on their specific use. The most common materials are stainless steel, hardened steel, brass, and plastic. Stainless steel is resistant to rust and very strong. Hardened steel is tough and can withstand wear and tear. Brass is used when electrical conductivity is important. Plastic ball plungers are lightweight and used for less demanding tasks. The material choice depends on factors like strength, durability, and the purpose of the ball plunger.

What is the standard size of a ball plunger?

The standard size of a ball plunger can vary depending on the manufacturer and application. However, they generally come in different diameters and lengths. Common diameters range from 3mm to 20mm, while lengths can range from 10mm to 50mm or more. These sizes are widely used, but it's important to note that specific industries or applications may have their own standard sizes based on their requirements.

How much pressure does a plunger create?

The amount of pressure a plunger creates depends on various factors, including its design, size, and the force applied to it. Plungers typically generate pressure by compressing air or liquid trapped within a confined space. The specific pressure created can vary significantly. In household use, a plunger can create enough pressure to unclog a drain. However, in industrial applications, specialized plungers can generate much higher pressures to perform tasks such as hydraulic or pneumatic actuation.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Ball Plungers

Ball Plungers are the essential components for precise positioning and secure alignment in a wide range of industrial applications.Ball Plungers are designed with a threaded body and a spring-loaded ball, making them ideal for fixtures, jigs, and machinery that require accurate indexing and locating. These compact devices ensure positive contact with mating surfaces, preventing unwanted movement, and providing stability.With their smooth operation and reliable performance, our Ball Plungers are perfect for applications such as positioning pins, detents, indexing mechanisms, and mechanical stops. They offer exceptional convenience and flexibility in achieving precise alignment and positioning.Crafted from durable materials, our Ball Plungers are built to withstand demanding environments and ensure long-lasting performance. Available in various sizes and configurations, they can be easily integrated into your existing equipment.Upgrade your manufacturing processes with our high-quality Ball Plungers to enhance productivity, improve accuracy, and achieve precise positioning. Experience the reliability and versatility of our Ball Plungers today and take your industrial applications to new heights.

Show More Detail Show More Detail

Mounting Method	Screw (Hex) Screw (Straight Slot) Screw (Cap) Flanged Press Fit
Brand	(30) (13) BRAMA (4) HARA DOKI (3) IMAO CORPORATION (16) KONISHI (4) NABEYA (4) NABEYA BI-TECH (7) TRUSCO NAKAYAMA (2) WOOCHANG (2)
Filter By	All Sale Items
CAD	2D 3D
Days to Ship	All Same day 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less Others

72 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Stainless Steel, White Zinc Plated【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Stainless Steel, White Zinc Plated. - The series including of C-BPU (Light Load) and C-BPM (Heavy Load). - Main Body Material: S45C White Zinc Plating is cost effective option. - Ball Material: Stainless Steel SUS440C - Ball Hardness: 52HRC. - Spring Material: Stainless Steel SUS304. - Mounting Method: Screw (Hex). - Coarse Thread Size (M): 4, 5, 6 and 8. - Ball Plungers suitable for medical, electronic, and other equipment with high surface requirements. - For MISUMI Economy series ball plungers without painting and coloring.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	4 ～ 8	0.8 ～ 1.6	Stainless Steel	Steel	Not Provided	0.01~50	Not Provided	Others	Not Provided

From: 78,478 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Stainless Steel, SUS Ball/POM Ball【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Stainless Steel, SUS Ball/POM Ball. - The series including of C-BMS, C-BSX, C-BSM C-NBSM and C-NBSX - Main Body Material: Stainless Steel SUS304. - Ball Material: Stainless Steel SUS304 and POM. - Spring Material: Stainless Steel SUS304. - Economy Ball Plunger Mounting Method: Screw (Hex). - Coarse Thread Size (M): 2, 3, 4, 5, 6, 8, 10 12 and 16. - Ball Plungers suitable for medical, electronic, and other equipment with high surface requirements. - For MISUMI Economy series ball plungers without painting and coloring.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 3.5	Stainless Steel / Others / Ceramics	-	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 62,278 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Press Fit Ball Plungers【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Press Fit Ball Plungers - Part number are series: C-PFSSN, C-PFSSR, C-PFPSN and C-PFPPN. - Press Fit Ball Plungers type: Light Load and Heavy Load. - Main Body Material: SUS303 and POM. - Ball Material: SUS440C and POM. - Ball Hardness: 50HRC. - Spring Material: Stainless Steel SUS304. - Press Fit Plungers Mounting Method: Press Fit. - Coarse Thread Size (M): 3, 4, 5, 6, 8 and 10. - Package Quantity: 10 and 20 PCS (Please check before order) - No threaded hole required Short and light Easy to install.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	3 ～ 10	0.6 ～ 2.8	Stainless Steel / Others / Ceramics	Stainless Steel / Others	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 78,478 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Stainless Steel, Short Body【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Stainless Steel, Short Body - The series including of C-BPK. - Main Body Material: Stainless Steel SUS304. - Ball Material: Stainless Steel SUS304. - Spring Material: Stainless Steel SUS304. - Mounting Method: Screw (Hex). - Coarse Thread Size (M): 3, 4, 5, 6 and 8. - Initial Load (Range): 0.01 ~ 50 N. - Package Quantity: 10 and 20 PCS (Please check before order) - This type can be installed only by using a hex socket. - For MISUMI Economy series ball plungers without painting and coloring.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 8	0.5 ～ 1.6	Stainless Steel	Stainless Steel	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 86,068 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Standard Type

MISUMI

- Ball Plungers-Standard Type - Part number are series: PBF, PBF-KN, PBF-KS and PBF-KSN. - Ball Plungers type: Metal ball and Plastic ball. - Body Material: SCM35, Stainless Steel SUS304 Equivalent and steel S45C - Body surface treatment: Black Oxide and Electroless Nickel Plating. - Body hardness: 29~35HRC - Ball Material: SUJ2 high chromium tool steel and Polyacetal. - Ball Hardness: 55HRC. - Spring Material: SWP-B. - Spacer Material: Stainless Steel SUS304. - Fine Thread Size (M): 2, 3, 4, 5, 6, 8, 10 12 and 16. - Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	2 ～ 16	0.2 ～ 2.5	Steel / Plastic	Steel / Stainless Steel	Not Provided / Provided	0.01~50	Not Provided / Hardening	Not Provided / Black Oxide / Electroless Nickel Plating	Not Provided

From: 47,240 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Press Fit Plungers-Standard Type

MISUMI

- Press Fit Plungers-Standard Type. - Part number including type of PFSSN, PFSSR, PFPSN and PFPPN. - Press Fit Plungers: Metal Ball and Plastic Ball. - Main Body Material: Stainless Steel SUS303 and Polyacetal. - Ball Material: Stainless Steel SUS440C and Polyacetal. - Ball Hardness: 55HRC for only metal ball type. - Spring Material is Stainless Steel SUS631J1. - Mounting Method: Screw (Hex) - Coarse Thread Size (M): 2, 3, 5, 6, 8 and 10. - Metal Ball Operating temperature: -20 to 120°C. - Plastic Ball Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	2 ～ 10	0.3 ～ 2.4	Stainless Steel / Plastic	Stainless Steel / Plastic	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 27,090 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Stainless Steel, Black Zinc Plated【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Black Zinc Plated - The series including of C-BPJF (Ultra-Light Load), C-BSJF (Light Load) and C-BPW (Heavy Load). - Main Body Material: Steel S45C. - Main Body Material surface treatment: Zinc-Plated (Black) - Ball Material: Stainless Steel SUS440C - Ball Hardness: 52HRC. - Spring Material: Stainless Steel SUS304 - Economy Ball Plunger Mounting Method: Screw (Hex). - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10 12 and 16. - Package Quantity: 10 and 20 PCS (Please check before order) - For MISUMI Economy series ball plungers without painting and coloring.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 3.3	Stainless Steel	Steel	Not Provided	0.01~50	Not Provided	Others	Not Provided

From: 78,478 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Flanged【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Flanged - Part number are series: C-FBPJ and C-FBPJS. - Main Body Material: Steel S45C and Stainless Steel SUS303. - Main Body Material surface treatment: Zinc-Plated (Black) for only C-FBPJ type. - Ball Material: SUS440C. - Ball Hardness: 52HRC. - Spring Material: Stainless Steel SUS304. - Ball Plungers Mounting Method: Flanged. - Coarse Thread Size (M): 5, 6, 8 and 10. - Initial Load (Range): 0.01~50 N. - Package Quantity: 10 and 20 PCS (Please check before order) - The thickness of the plunger from the plate can be fixed with a flange.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Flanged	5 ～ 10	0.8 ～ 1.9	Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50	Not Provided	Not Provided / Others	Not Provided

From: 192,347 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Stainless Steel/Long Type/Metal Ball and Plastic Ball

MISUMI

- Ball Plungers-Stainless Steel/Long Type/Metal Ball and Plastic Ball - Ball Plungers Type: Metal Ball and Plastic Ball. - Main Body Material: Stainless Steel SUS304 Equivalent. - Main Body Hardness: 29~35HRC. - Main Body Surface treatment: Nickel Plating and Blackening. - Ball Material: Stainless Steel SUS440C and Polyacetal. - Metal Ball Hardness: 55HRC - Spring Material: Stainless Steel SUS631J1. - Spacer material is Stainless Steel SUS304. - Ball Plungers Mounting Method: Screw (Hex). - Ball Plungers Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12 and 16. - Operating temperature: -30 to 260°C

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Stainless Steel / Plastic	Stainless Steel	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 111,976 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Stainless Steel, Long Body, SUS Ball/POM Ball【10-20 Pieces Per Package】

MiSUMi Economy

MISUMI

- Economy series Ball Plungers Stainless Steel, Long Body, SUS Ball/POM Ball - The series including of C-BSML, C-BSZL, C-NBSML and C-NBSZL - Main Body Material: Stainless Steel SUS304. - Ball Material: Stainless Steel SUS304 and POM. - Spring Material: Stainless Steel SUS304. - Economy Ball Plunger Mounting Method: Screw (Hex). - Coarse Thread Size (M): 3, 4, 5, 6 and 8. - Package Quantity: 10 and 20 PCS (Please check before order) - Ball Plungers suitable for medical, electronic, and other equipment with high surface requirements. - For MISUMI Economy series ball plungers without painting and coloring.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 8	0.5 ～ 1.8	Stainless Steel / Others / Ceramics	-	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 108,985 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Economy【1-100 Pieces Per Package】

MISUMI

- Economy - Ball Plungers - Part number including type of BPU (Light Load), BPM (Heavy Load) and BPQ (Extra Heavy Load). - Main Body Material: Steel SCM435 - Main Body Surface treatment: Trivalent Chromate solution. - Ball Material: Steel SUJ2. - Ball Hardness: 55HRC. - Spring Material: Carbon steel wire SWP-B. - Spacer material is Stainless Steel SUS304. - Ball Plungers Mounting Method: Screw (Hex). - Ball Plungers Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12, 16 and 20. - Economy Ball Plungers Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 20	0.5 ～ 4.5	Steel	Steel	Not Provided	0.01~50 / 50.01~100	Hardening	Electroless Nickel Plating / Trivalent Chromate	Not Provided

From: 27,980 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Roller Type

MISUMI

- Ball Plungers-Roller Type - Part number including type of BPRM and BPRJ. - Ball Plungers: Metal Ball and Plastic Ball type. - Main Body Material: Stainless Steel SUSXM7. - Ball Material: Stainless Steel SUS440C and Polyacetal. - Ball Hardness: 55HRC for only metal ball type. - Spring Material is Stainless Steel SUS631J1. - Mounting Method: Screw (Hex) - Coarse Thread Size (M): 5, 6, 8, 10, 12 and 16. - Metal Ball Operating temperature: -30 to 100°C. - Plastic Ball Operating temperature: -30 to 80°C. - The combination structure of the main ball and the sub balls helps smooth rotation of the ball.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	5 ～ 16	0.7 ～ 3.1	Stainless Steel / Plastic	Stainless Steel	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 170,362 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Roller

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	6 ～ 16	0.8 ～ 3.1	Stainless Steel / Others / Ceramics	-	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 67,526 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Flanged Type

MISUMI

- Ball Plungers-Flanged Type - Part number including type FBPJ and FBPJS. - Main Body Hardness: 29~35HRC. - Main Body Material can select Carbon Steel S45C or Stainless Steel SUS303. - Main Body Surface treatment: Back oxide - Ball Material: Stainless Steel SUS440C. - Ball Heat Treatment : Hardening - Ball Hardness: 55HRC. - Spring Material is Stainless Steel SUS631J1. - Mounting Method: Flanged - Coarse Thread Size (M): 5, 6, 8, 10, 12 and 16. - Operating temperature: -30~260°C - Applicable Wrench: BPJG1, BPJG2, BPJG3, BPJG4 and BPJG5 following MISUMI table standard.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Flanged	5 ～ 16	0.8 ～ 3.2	Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 76,650 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Stainless Steel/Metal Ball and Plastic Ball

MISUMI

- Ball Plungers- Stainless Steel / Metal Ball and Plastic Ball. - Part number including type of BMS, BSM, BSZF, BSX, NBSS, NBSM, NBSZ and NBSX. - Ball Plungers Type: Metal Ball and Plastic Ball. - Main Body Material: SUS304 Equivalent. - Ball Material: Stainless Steel SUS440C and Polyacetal. - Spring Material: Stainless Steel SUS631J1 - Spacer Material: Stainless Steel SUS304. - Mounting Method: Screw (Hex) - Coarse Thread Size (M): 2, 3, 4, 5, 6, 8, 10 12 and 16. - Metal Ball Operating temperature: -30 to 260°C. - Plastic Ball Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	2 ～ 16	0.2 ～ 2.5	Stainless Steel / Plastic	Stainless Steel	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 68,390 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Short Type

MISUMI

- MISUMI standard Ball Plungers - Short Type. - Part number is type of BPK. - Main Body Material: Stainless Steel SUSXM7. - Ball Material: Stainless Steel SUS440C - Ball Hardness: 59 to 66HRC. - Spring Material: Stainless Steel SUS304-WPB. - Spacer Material: Stainless Steel SUS304. - Mounting Method: Screw (Hex). - Coarse Thread Size (M): 3, 4, 5, 6 and 8. - Operating temperature: -30 to 240°C. - This type can be installed only by using a hex socket. - As the overall length is shorter than conventional ball plungers by about 30%.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 8	0.5 ～ 1.2	Stainless Steel	Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided	Not Provided

From: 96,754 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Long Type/Metal Ball and Plastic Ball

MISUMI

- Ball Plungers-Long Type/Metal Ball and Plastic Ball - Ball Plungers Type: Metal Ball and Plastic Ball. - Main Body Material: Steel S45C and Stainless Steel SUS304. - Body surface treatment: Black Oxide Coating and Electroless Nickel Plating Coating for steel. - Ball Material: Steel SUJ2 and Polyacetal. - Metal Ball Hardness: 55HRC. - Spring Material: Stainless Steel SWP-B - Nut material: Stainless Steel SUS303 - Spacer Material: Stainless Steel SUS304 and Brass. - Mounting Method: Screw (Hex) - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12 and 16. - Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Steel / Plastic	Steel / Stainless Steel	Not Provided	0.01~50 / 50.01~100	Not Provided / Hardening	Not Provided / Black Oxide / Electroless Nickel Plating	Not Provided

From: 67,390 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Hex Screw and Hex Socket Screw

MISUMI

- Ball Plungers-Hex Screw and Hex Socket Screw - The series including of BPHL, BPHH, BPRL and BPRH. - Ball Plungers Type: Hex Head Cap Screw and Hex Socket Head Cap Screw. - Body Material: Steel S45C and SCM435. - Body surface treatment solutions: Black Oxide and Electroless Nickel Plating. - Ball Material: SUJ2 - Spring Material: SWP-B - Spacer Material: Stainless Steel SUS304. - Mounting Method: Screw (Cap) - Coarse Thread Size (M): 4, 5, 6, 8, 10 12 and 16. - Operating temperature: -30 to 80°C. - The Hex Screw shape enables positioning of the tips easily.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Cap)	4 ～ 16	0.8 ～ 2.5	Steel	Steel	Not Provided	0.01~50	Hardening	Black Oxide / Electroless Nickel Plating	Not Provided

From: 89,060 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Hex Socket Head Cap Screw

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Cap)	4 ～ 16	0.8 ～ 2.5	Steel / Stainless Steel	-	Not Provided	0.01~50	Not Provided	Not Provided / Black Oxide	Not Provided

From: 14,153 VND
Days to Ship: Số ngày giao hàng: 11 Day(s)

11 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Fine Thread/Light Load and Heavy Load

Ball Plungers-Fine Thread/Light Load and Heavy Load

MISUMI

- Ball Plungers-Fine Thread/Light Load and Heavy Load - Part number are type: BMPJ (Light Load) and BMSJ (Heavy Load). - Ball Plungers Body Material: Carbon Steel S45C - Body Material surface treatment: Black Oxide solutions. - Ball Material: SUJ2 high chromium tool steel. - Ball Hardness: 55HRC. - Spring Material: SWP-B. - Spacer Material: Stainless Steel SUS304. - Ball Plungers Mounting Method: Screw (Hex). - Fine Thread Size (M): 3, 4, 5, 6 and 8. - Operating temperature: -30 to 80°C. - Fine threads provide an easy fine adjustment of strokes.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 8	0.5 ～ 1	Steel	Steel	Not Provided	0.01~50	Hardening	Black Oxide	Not Provided

From: 75,560 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Resin Body, Metal Ball

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	6 ～ 10	0.8 ～ 1.2	Stainless Steel / Others / Ceramics	Others	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 14,153 VND
Days to Ship: Số ngày giao hàng: 11 Day(s)

11 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Spring Plunger Ball Type / Internal Hex WRENCH Type

HARA DOKI

Volume Discount

CAD ：: 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	M 3 ～ M12	0.4 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	-	-	-	Not Provided / Others	Others

From: 91,745 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Load Adjustable

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	8 ～ 12	1 ～ 1.8	Stainless Steel / Others / Ceramics	-	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 50,999 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers Straight Slot Groove

MISUMI

- C-Value Ball Plungers Heavy Load-Straight Slot Groove - Part number including type C-BPES and C-BPEU. - Main Body Material can select Carbon Steel SCM435 or Stainless Steel SUS304. - Main Body Hardness: 29~35HRC. - Main Body Surface treatment: Back oxide - Ball Material: Carbon Steel SUJ2 or Stainless Steel SUS304. - Ball Heat Treatment : Hardening solution. - Ball Hardness: 55HRC. - Spring Material is Stainless Steel SUS304. - Ball Plungers Mounting Method: Screw (Straight Slot) - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12 and 16.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	3 ～ 16	0.5 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50 / 50.01~100	Hardening	Not Provided / Black Oxide	Not Provided

From: 52,339 VND
Days to Ship: Số ngày giao hàng: 5 Day(s)

5 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers (Light Load) BP-L, (Heavy Load) BP-H

KONISHI

The screw contains a spring; the force of the spring can make the ball go in and out. Can be used to calculate, select the position of, and push out jigs. Screw diameters from M3 to M24 available; select the size you need.

CAD ：: 2D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	3 ～ 24	0.5 ～ 5.5	Steel	Steel	Not Provided	0.01~50 / 50.01~100 / 100.01~300	Not Provided	Black Oxide	Not Provided

From: 57,835 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Press Fit, Roller, Resin Ball

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	7 ～ 24	1.5 ～ 6.6	Others / Ceramics	Others	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 23,493 VND
Days to Ship: Số ngày giao hàng: 11 Day(s)

11 Day(s)

You can add up to 6 items per a category to the compare list. Compare

On Sale Till 04/12/2025

Press Fit Plunger PPR

NABEYA BI-TECH

Pressure-type plunger.[Features]- Press-fit plunger.- [PPR] made entirely of stainless steel.- [PPR-KD] ball is made of plastic.- Does not scratch the workpieces.- [PPR-KU] and [PPR-KD] are electrically insulated.- Operating temperature (PPR-KUPPR-KD): –30°C to +50°C.- Use the ball button BB with improved abrasion resistance for the receiving side.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	4 ～ 12	0.8 ～ 4	Stainless Steel / Plastic	Stainless Steel / Plastic	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 43,258 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, PBSH

NABEYA BI-TECH

- PBSH and PBSFS Series-Miniature Ball Plungers. - Part number are series: PBSF and PBSFS. - Miniature Ball Plungers Main Body Material: Steel SUM22L and Stainless Steel SUS303. - Main Body Material surface treatment: Black Oxide Coating for PBSF. - Ball Material: Steel SUJ2 and Stainless Steel SUS303. - Ball Heat Treatment: Hardening for steel type materials. - Spring Material: Stainless Steel SUS631J1. - Miniature Ball Plungers Coarse Thread Size (M): 4, 5, 6, 8, 10 and 12 - Initial Load (Range): 0.01~50 N - PBSH Ball Plungers Mounting Method: Bolt (Cap)

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Cap)	4 ～ 12	0.8 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 255,610 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Selectable Length/Metal Ball and Plastic Ball

MISUMI

- Ball Plungers-Selectable Length/Metal Ball and Plastic Ball - Part number including type of BPSLS, BPJLS, BSJLS, BPWLS and NPJRS. - Main Body Material: Steel SCM435 - Main Body Hardness: 29~35HRC. - Main Body Surface treatment: Nickel Plating and Blackening. - Ball Material: Steel SUJ2 and Polyacetal. - Metal Ball Hardness: 55HRC. - Spring Material: Carbon steel wire SWP-B. - Spacer material is Stainless Steel SUS304. - Ball Plungers Mounting Method: Screw (Hex). - Ball Plungers Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12 and 16. - Operating temperature: -30 to 80°C.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Steel / Plastic	Steel	Not Provided	0.01~50 / 50.01~100	Not Provided / Hardening	Black Oxide / Nickel Plating	Not Provided

From: 132,203 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Plastic Ball Plunger - PPP

NABEYA BI-TECH

[Features]· Plastic main body. Electrically insulated.· Two types of ball are used: stainless steel balls (PPP-N) and plastic balls (PPP-P).· Operable temperature of -30°C to +50°C. For the receiving end, please use abrasion resistant ball buttons (BB).

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	6 ～ 10	1 ～ 2	Stainless Steel / Plastic	Plastic	Not Provided	0.01~50	Not Provided	Not Provided	Not Provided

From: 69,950 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plunger - Spring Body

HARA DOKI

[Product Information] Used for locating. •Related Keywords: HALDER, Ball Plunger, Plunger/Index Plunger

CAD ：: 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	2.2 ～ 5	0.3 ～ 3.8	Steel / Stainless Steel	Steel / Stainless Steel	-	-	-	Nickel Plating	-

From: 256,616 VND
Days to Ship: Số ngày giao hàng: 12 Day(s)

12 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Stainless Steel/Selectable Length

Ball Plungers-Stainless Steel/Selectable Length

MISUMI

- Ball Plungers-Stainless Steel/Selectable Length - Part number including type BSSLS, BSMLS, BSZLS and BSXLS. - Main Body Material is Stainless Steel SUS304 Equivalent - Ball Material: Stainless Steel SUS440C. - Ball Hardness :55HRC - Spring Material is Stainless Steel SUS631J1. - Spacer material: Stainless Steel SUS304 - Ball Plungers Mounting Method: Screw (Hex) - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12 and 16. - Operating temperature: -30~260°C - Ball plungers made of stainless steel are a popular choice for applications where durability, corrosion resistance, and high load capacity are required.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Stainless Steel	Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided	Not Provided

From: 144,923 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Load Adjustable Type

MISUMI

- Ball Plungers-Load Adjustable Type. - Part number including type of BPCF and NPCF. - Ball Plungers Type: Metal Ball and Plastic Ball. - Main Body Material: Stainless Steel SUS303. - Ball Material: Stainless Steel SUS440C and Polyacetal. - Ball Hardness: 55HRC for only metal ball type. - Spring Material: Stainless Steel SUS304-WPB - Nut material: Stainless Steel SUS303 - Spacer Material: Stainless Steel SUS304. - Mounting Method: Screw (Hex) - Coarse Thread Size (M): 8, 10 and 12. - Plastic Ball Operating temperature: -30 to 80°C. - Initial Load (Range): 0.01~ 50 N.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	8 ～ 12	1 ～ 1.8	Stainless Steel / Plastic	Stainless Steel	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 200,806 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Engineering Plastic Case Plunger (EBP, EBPJ)

IMAO CORPORATION

Embedded ball plungers. The main body and ball are available in plastic and stainless steel.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	4 ～ 12	0.7 ～ 3.5	Stainless Steel / Plastic	Plastic	Not Provided	0.01~50	Hardening	Not Provided	Not Provided

From: 34,510 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Hex Socket Ball Plunger (BST, BSTH)

IMAO CORPORATION

[Features]· Mountable with a hex wrench.· Available in two types of load for each screw diameter.·The rear surfaces are marked for product identification.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 24	0.5 ～ 5.5	Steel	Steel	Not Provided	0.01~50 / 50.01~100 / 100.01~300	Hardening	Black Oxide	Not Provided

From: 70,630 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Engineering Plastic Ball Plunger (BEE / BEU)

IMAO CORPORATION

The main body is made of plastic; therefore, it is electrically insulated. Balls available in plastic and steel.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	6 ～ 10	1 ～ 2	Stainless Steel / Plastic	Plastic	Not Provided	0.01~50	Hardening	Not Provided	Not Provided

From: 80,603 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plunger (BST, BSTH)

IMAO CORPORATION

Classic ball plungers. Mountable with a flat-head screwdriver. Available in two types of load for each screw diameter.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	3 ～ 20	0.5 ～ 4.5	Steel	Steel	Not Provided	0.01~50 / 50.01~100 / 100.01~300	Hardening	Black Oxide	Not Provided

From: 70,673 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Press Fit Plungers-Roller Type

MISUMI

- Press Fit Plungers-Roller Type - Press-fit plunger with smooth rotating balls. - Part number is type: PFPR. - Main Body Material: Polyacetal. - Main Ball Material: Polyacetal. - Sub Balls Material: Stainless Steel SUS440C. - Spring Material: Stainless Steel SUS631J1. - Press Fit Plungers Mounting Method: Press Fit. - Coarse Thread Size (M): 7, 9, 13, 15, 20 and 24. - Maximum Allowable Load (N): 2 to 20. - Operating temperature: -30 to 80°C. - The combination structure of the main ball and the sub balls helps smooth rotation of the ball.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	7 ～ 24	1.5 ～ 6.6	Plastic	Plastic	Not Provided	0	Not Provided	Not Provided	Not Provided

From: 254,189 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, PBF

NABEYA BI-TECH

- PBF series-Miniature Ball Plungers. - Part number are series: PBF, PBF-KN, PBF-KS and PBF-KSN. - Ball Plungers type: Light Load and Heavy Load. - Main Body Material: Steel and Stainless Steel SUS303. - Main Body Material surface treatment: Black Oxide Coating for PBF and PBF-KS type. - Ball Material: Steel and Stainless Steel SUS303. - Ball Heat Treatment: Hardening for steel type materials. - Spring Material: Stainless Steel SUS631J1. - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12, 16, 20 and 24. - Ball Plungers Mounting Method: Screw (flathead groove)

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	3 ～ 24	0.4 ～ 5.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50 / 50.01~100 / 100.01~300	Hardening	Not Provided / Black Oxide	Not Provided

From: 61,293 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Ball Plunger (Cap Type) (BSTCA, BSUCA)

IMAO CORPORATION

[Features]· Cap screw type ball plungers.· Positioning is possible below the head.· Available in steel and stainless steel.· Locked in position by the seat surface.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Cap)	6 ～ 12	1 ～ 2.5	Stainless Steel	Steel / Stainless Steel	Not Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 157,466 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Press Ball Plunger

NABEYA

Press fit plungers. This plunger is ideal for positioning, fixing, pressing, pushing against and pushing apart.

CAD ：: 2D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	4 ～ 8	0.8 ～ 2.4	Stainless Steel / Plastic	Stainless Steel / Plastic	Not Provided	0.01~50	Not Provided / Carburized	Not Provided	Not Provided

From: 51,760 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Stainless Bolt Type Ball Plunger【10-50 Pieces Per Package】

BRAMA

Material : SUS303 / Finishing : Cylindrical Polishing / Features : SL-9040-1 Hexagon Wrench Type

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
-	-	-	-	-	-	-	-	-	-

From: 935,135 VND
Days to Ship: Số ngày giao hàng: 7 Day(s)

7 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Ball Plungers-Plastic Body/Metal Ball and Plastic Ball

Ball Plungers-Plastic Body/Metal Ball and Plastic Ball

MISUMI

- Ball Plungers-Plastic Body/ Metal Ball and Plastic Ball - Ball Plungers-Plastic: Metal Ball and Plastic Ball. - Body Material: Plastic Polyacetal (Black color) and Plastic Nylon 66 (White color) - Ball Material: Stainless Steel SUS440C and Plastic Polyacetal (White) - Ball Hardness: 55HRC~ for only Stainless-Steel ball type. - Spring Material are Stainless Steel SUS304 and SUS631J1. - Mounting Method: Screw (Straight Slot). - Coarse Thread Size (M): 6, 8 and 10. - Operating temperature: -30 to 80°C. - Plastic ball plungers find applications in various industries, including electronics, consumer products, medical devices, automotive, and more. - BPS Ball Plungers-Stainless Steel - Part number including type BPS-L and BPS-H. - BPS Ball Plungers: Stainless Steel Light Load and Stainless-Steel Heavy Load type. - Main Body Material Stainless Steel SUS303. - Main Body Surface treatment: Back oxide - Ball Material: Stainless Steel SUS404C. - Ball Hardness: 54~60HRC. - Spring Material is Stainless Steel SUS631J. - Mounting Method: Screw (hexagon) - Coarse Thread Size (M): 3, 4, 5, 6, 8, 10, 12, 16, 20 and 24. - Ball plungers made of stainless steel are a popular choice for applications where durability, corrosion resistance, and high load capacity are required.

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Straight Slot)	6 ～ 10	0.8 ～ 1.2	Stainless Steel / Plastic	Plastic	Not Provided	0.01~50	Not Provided / Hardening	Not Provided	Not Provided

From: 55,883 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Ball Plungers Double-Sided

MiSUMi Economy

MISUMI

Volume Discount

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Press Fit	2.5 ～ 8	0.65 ～ 2.1	Stainless Steel	Brass	Not Provided	-	Not Provided	Not Provided	Not Provided

From: 9,452 VND
Days to Ship: Số ngày giao hàng: 11 Day(s)

11 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Miniature Ball Plungers, FP/MP/MPS

NABEYA BI-TECH

[Features]· A spacer is inserted between the ball and spring (excluding M3).· The ball rotates smoothly.· [FP] Light load, [MP] heavy load, and [MPS] heavy load (all stainless steel) / [MPS-Z] extreme heavy load (all stainless steel).· [MPS], [MPS-Z] (all stainless steel). Superior corrosion resistance and heat resistance.· [FP], [MP] are equipped with a nylon self-locking feature (excluding M3/M4).· For [MPS], tighten the ball plunger periodically to prevent it from loosening.· [EBF] miniature ball plunger, which includes a built-in contact switch, is also available.

CAD ：: 2D / 3D

Mounting Method	Outer Dia. M(mm)	Stroke S(mm)	Tip Material	Body Material	Lock	Initial Load (Range)(N)	Tip Heat Treatment	Main Body Surface Treatment	Tip Surface Treatment
Screw (Hex)	3 ～ 16	0.5 ～ 2.5	Steel / Stainless Steel	Steel / Stainless Steel	Not Provided / Provided	0.01~50	Hardening	Not Provided / Black Oxide	Not Provided

From: 137,681 VND
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Mounting Method
Outer Dia. M(mm)
Stroke S(mm)
Tip Material
Body Material
Lock
Initial Load (Range)(N)
Tip Heat Treatment
Main Body Surface Treatment
Tip Surface Treatment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 04/12/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	HARA DOKI	MISUMI MiSUMi Economy	MISUMI	KONISHI	MISUMI MiSUMi Economy	NABEYA BI-TECH	NABEYA BI-TECH	MISUMI	NABEYA BI-TECH	HARA DOKI	MISUMI	MISUMI	IMAO CORPORATION	IMAO CORPORATION	IMAO CORPORATION	IMAO CORPORATION	MISUMI	NABEYA BI-TECH	IMAO CORPORATION	NABEYA	BRAMA	MISUMI	MISUMI MiSUMi Economy	NABEYA BI-TECH
Product SeriesDòng sản phẩm	Ball Plungers Stainless Steel, White Zinc Plated【10-20 Pieces Per Package】	Ball Plungers Stainless Steel, SUS Ball/POM Ball【10-20 Pieces Per Package】	Press Fit Ball Plungers【10-20 Pieces Per Package】	Ball Plungers Stainless Steel, Short Body【10-20 Pieces Per Package】	Ball Plungers-Standard Type	Press Fit Plungers-Standard Type	Ball Plungers Stainless Steel, Black Zinc Plated【10-20 Pieces Per Package】	Ball Plungers Flanged【10-20 Pieces Per Package】	Ball Plungers-Stainless Steel/Long Type/Metal Ball and Plastic Ball	Ball Plungers Stainless Steel, Long Body, SUS Ball/POM Ball【10-20 Pieces Per Package】	Ball Plungers-Economy【1-100 Pieces Per Package】	Ball Plungers-Roller Type	Ball Plungers Roller	Ball Plungers-Flanged Type	Ball Plungers-Stainless Steel/Metal Ball and Plastic Ball	Ball Plungers-Short Type	Ball Plungers-Long Type/Metal Ball and Plastic Ball	Ball Plungers-Hex Screw and Hex Socket Screw	Ball Plungers Hex Socket Head Cap Screw	Ball Plungers-Fine Thread/Light Load and Heavy Load	Ball Plungers Resin Body, Metal Ball	Spring Plunger Ball Type / Internal Hex WRENCH Type	Ball Plungers Load Adjustable	Ball Plungers Straight Slot Groove	Ball Plungers (Light Load) BP-L, (Heavy Load) BP-H	Ball Plungers Press Fit, Roller, Resin Ball	Press Fit Plunger PPR	Miniature Ball Plungers, PBSH	Ball Plungers-Selectable Length/Metal Ball and Plastic Ball	Plastic Ball Plunger - PPP	Ball Plunger - Spring Body	Ball Plungers-Stainless Steel/Selectable Length	Ball Plungers-Load Adjustable Type	Engineering Plastic Case Plunger (EBP, EBPJ)	Hex Socket Ball Plunger (BST, BSTH)	Engineering Plastic Ball Plunger (BEE / BEU)	Ball Plunger (BST, BSTH)	Press Fit Plungers-Roller Type	Miniature Ball Plungers, PBF	Ball Plunger (Cap Type) (BSTCA, BSUCA)	Press Ball Plunger	Stainless Bolt Type Ball Plunger【10-50 Pieces Per Package】	Ball Plungers-Plastic Body/Metal Ball and Plastic Ball	Ball Plungers Double-Sided	Miniature Ball Plungers, FP/MP/MPS
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D		2D / 3D	2D / 3D	2D / 3D
From	78,478 VND	62,278 VND	78,478 VND	86,068 VND	47,240 VND	27,090 VND	78,478 VND	192,347 VND	111,976 VND	108,985 VND	27,980 VND	170,362 VND	67,526 VND	76,650 VND	68,390 VND	96,754 VND	67,390 VND	89,060 VND	14,153 VND	75,560 VND	14,153 VND	91,745 VND	50,999 VND	52,339 VND	57,835 VND	23,493 VND	43,258 VND Special Price On Sale Till 04/12/2025	255,610 VND	132,203 VND	69,950 VND	256,616 VND	144,923 VND	200,806 VND	34,510 VND	70,630 VND	80,603 VND	70,673 VND	254,189 VND	61,293 VND	157,466 VND	51,760 VND	935,135 VND	55,883 VND	9,452 VND	137,681 VND
Days to ShipSố ngày giao hàng	Same day	Same day	Same day	Same day	Same day or more	Same day or more	Same day	Same day	Same day or more	Same day	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day	Same day or more	Same day or more	11 Day(s)	Same day or more	11 Day(s)	4 Day(s) or more	Same day or more	5 Day(s)	4 Day(s) or more	11 Day(s)	Same day or more	4 Day(s) or more	Same day or more	Same day or more	12 Day(s)	Same day or more	Same day or more	Same day or more	Same day or more	8 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	9 Day(s) or more	Same day or more	7 Day(s)	Same day or more	11 Day(s)	Same day or more
SpecificationsĐặc điểm kĩ thuật
Mounting Method	Screw (Hex)	Screw (Hex)	Press Fit	Screw (Hex)	Screw (Hex)	Press Fit	Screw (Hex)	Flanged	Screw (Hex)	Screw (Hex)	Screw (Hex)	Screw (Hex)	Screw (Hex)	Flanged	Screw (Hex)	Screw (Hex)	Screw (Hex)	Screw (Cap)	Screw (Cap)	Screw (Hex)	Screw (Straight Slot)	Screw (Hex)	Screw (Hex)	Screw (Straight Slot)	Screw (Straight Slot)	Press Fit	Press Fit	Screw (Cap)	Screw (Hex)	Screw (Straight Slot)	Press Fit	Screw (Hex)	Screw (Hex)	Press Fit	Screw (Hex)	Screw (Straight Slot)	Screw (Straight Slot)	Press Fit	Screw (Straight Slot)	Screw (Cap)	Press Fit	-	Screw (Straight Slot)	Press Fit	Screw (Hex)
Outer Dia. M(mm)	4 ～ 8	3 ～ 16	3 ～ 10	3 ～ 8	2 ～ 16	2 ～ 10	3 ～ 16	5 ～ 10	3 ～ 16	3 ～ 8	3 ～ 20	5 ～ 16	6 ～ 16	5 ～ 16	2 ～ 16	3 ～ 8	3 ～ 16	4 ～ 16	4 ～ 16	3 ～ 8	6 ～ 10	M 3 ～ M12	8 ～ 12	3 ～ 16	3 ～ 24	7 ～ 24	4 ～ 12	4 ～ 12	3 ～ 16	6 ～ 10	2.2 ～ 5	3 ～ 16	8 ～ 12	4 ～ 12	3 ～ 24	6 ～ 10	3 ～ 20	7 ～ 24	3 ～ 24	6 ～ 12	4 ～ 8	-	6 ～ 10	2.5 ～ 8	3 ～ 16
Stroke S(mm)	0.8 ～ 1.6	0.5 ～ 3.5	0.6 ～ 2.8	0.5 ～ 1.6	0.2 ～ 2.5	0.3 ～ 2.4	0.5 ～ 3.3	0.8 ～ 1.9	0.5 ～ 2.5	0.5 ～ 1.8	0.5 ～ 4.5	0.7 ～ 3.1	0.8 ～ 3.1	0.8 ～ 3.2	0.2 ～ 2.5	0.5 ～ 1.2	0.5 ～ 2.5	0.8 ～ 2.5	0.8 ～ 2.5	0.5 ～ 1	0.8 ～ 1.2	0.4 ～ 2.5	1 ～ 1.8	0.5 ～ 2.5	0.5 ～ 5.5	1.5 ～ 6.6	0.8 ～ 4	0.8 ～ 2.5	0.5 ～ 2.5	1 ～ 2	0.3 ～ 3.8	0.5 ～ 2.5	1 ～ 1.8	0.7 ～ 3.5	0.5 ～ 5.5	1 ～ 2	0.5 ～ 4.5	1.5 ～ 6.6	0.4 ～ 5.5	1 ～ 2.5	0.8 ～ 2.4	-	0.8 ～ 1.2	0.65 ～ 2.1	0.5 ～ 2.5
Tip Material	Stainless Steel	Stainless Steel / Others / Ceramics	Stainless Steel / Others / Ceramics	Stainless Steel	Steel / Plastic	Stainless Steel / Plastic	Stainless Steel	Stainless Steel	Stainless Steel / Plastic	Stainless Steel / Others / Ceramics	Steel	Stainless Steel / Plastic	Stainless Steel / Others / Ceramics	Stainless Steel	Stainless Steel / Plastic	Stainless Steel	Steel / Plastic	Steel	Steel / Stainless Steel	Steel	Stainless Steel / Others / Ceramics	Steel / Stainless Steel	Stainless Steel / Others / Ceramics	Steel / Stainless Steel	Steel	Others / Ceramics	Stainless Steel / Plastic	Steel / Stainless Steel	Steel / Plastic	Stainless Steel / Plastic	Steel / Stainless Steel	Stainless Steel	Stainless Steel / Plastic	Stainless Steel / Plastic	Steel	Stainless Steel / Plastic	Steel	Plastic	Steel / Stainless Steel	Stainless Steel	Stainless Steel / Plastic	-	Stainless Steel / Plastic	Stainless Steel	Steel / Stainless Steel
Body Material	Steel	-	Stainless Steel / Others	Stainless Steel	Steel / Stainless Steel	Stainless Steel / Plastic	Steel	Steel / Stainless Steel	Stainless Steel	-	Steel	Stainless Steel	-	Steel / Stainless Steel	Stainless Steel	Stainless Steel	Steel / Stainless Steel	Steel	-	Steel	Others	Steel / Stainless Steel	-	Steel / Stainless Steel	Steel	Others	Stainless Steel / Plastic	Steel / Stainless Steel	Steel	Plastic	Steel / Stainless Steel	Stainless Steel	Stainless Steel	Plastic	Steel	Plastic	Steel	Plastic	Steel / Stainless Steel	Steel / Stainless Steel	Stainless Steel / Plastic	-	Plastic	Brass	Steel / Stainless Steel
Lock	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided / Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided / Provided
Initial Load (Range)(N)	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50 / 50.01~100	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50	0.01~50 / 50.01~100	0.01~50	0.01~50	0.01~50	0.01~50	-	0.01~50	0.01~50 / 50.01~100	0.01~50 / 50.01~100 / 100.01~300	0.01~50	0.01~50	0.01~50	0.01~50 / 50.01~100	0.01~50	-	0.01~50	0.01~50	0.01~50	0.01~50 / 50.01~100 / 100.01~300	0.01~50	0.01~50 / 50.01~100 / 100.01~300	0	0.01~50 / 50.01~100 / 100.01~300	0.01~50	0.01~50	-	0.01~50	-	0.01~50
Tip Heat Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided / Hardening	Not Provided / Hardening	Not Provided	Not Provided	Not Provided / Hardening	Not Provided	Hardening	Not Provided / Hardening	Not Provided	Hardening	Not Provided / Hardening	Hardening	Not Provided / Hardening	Hardening	Not Provided	Hardening	Not Provided	-	Not Provided	Hardening	Not Provided	Not Provided	Not Provided / Hardening	Hardening	Not Provided / Hardening	Not Provided	-	Hardening	Not Provided / Hardening	Hardening	Hardening	Hardening	Hardening	Not Provided	Hardening	Hardening	Not Provided / Carburized	-	Not Provided / Hardening	Not Provided	Hardening
Main Body Surface Treatment	Others	Not Provided	Not Provided	Not Provided	Not Provided / Black Oxide / Electroless Nickel Plating	Not Provided	Others	Not Provided / Others	Not Provided	Not Provided	Electroless Nickel Plating / Trivalent Chromate	Not Provided	Not Provided	Not Provided / Black Oxide	Not Provided	Not Provided	Not Provided / Black Oxide / Electroless Nickel Plating	Black Oxide / Electroless Nickel Plating	Not Provided / Black Oxide	Black Oxide	Not Provided	Not Provided / Others	Not Provided	Not Provided / Black Oxide	Black Oxide	Not Provided	Not Provided	Not Provided / Black Oxide	Black Oxide / Nickel Plating	Not Provided	Nickel Plating	Not Provided	Not Provided	Not Provided	Black Oxide	Not Provided	Black Oxide	Not Provided	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided	-	Not Provided	Not Provided	Not Provided / Black Oxide
Tip Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Others	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. M(mm)
2

2.2

2.5

2.6

3

M 3

3.4

3.5

3.6

4

M 4

4.5

5

M 5

5.5

6

M 6

7

8

M 8

9

10

M10

12

M12

13

15

16

M16

20

24
Drawing

ClearTrống

Stroke S(mm)
0.2

0.3

0.4

0.5

0.6

0.65

0.7

0.8

0.9

0.95

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.1

2.3

2.4

2.5

2.6

2.7

2.8

3

3.1

3.2

3.3

3.5

3.8

4

4.5

5.2

5.5

6.6

10
Drawing

ClearTrống

Tip Material
ClearTrống

Body Material
- Steel
- Stainless Steel
- Brass
- Plastic
- Others
- SCM435
- SUS304
ClearTrống

Lock
- Not Provided
- Provided
ClearTrống

Initial Load (Range)(N)
- 0
- 0.01~50
- 50.01~100
- 100.01~300
ClearTrống

Tip Heat Treatment
- Not Provided
- Hardening
- Carburized
ClearTrống

Main Body Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Nickel Plating
- Trivalent Chromate
- Others
- Black Treatment
ClearTrống

Tip Surface Treatment
- Not Provided
- Others
ClearTrống

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

back next

Related Categories to Ball PlungersDanh mục liên quan đến Ball Plungers

FAQ Ball Plungers

Question: What are ball plungers used for?: Answer: Ball plungers are tiny tools used in different areas to help with precise positioning or locking. They have a spring-loaded ball inside a housing. When the ball is pressed, it extends, and when released, it retracts. They are commonly found in industries like manufacturing and electronics. They are useful for tasks such as aligning parts, holding them in place, or creating a detent mechanism for secure positioning.
Question: What material is ball plunger?: Answer: Ball plungers are usually made from different materials depending on their specific use. The most common materials are stainless steel, hardened steel, brass, and plastic. Stainless steel is resistant to rust and very strong. Hardened steel is tough and can withstand wear and tear. Brass is used when electrical conductivity is important. Plastic ball plungers are lightweight and used for less demanding tasks. The material choice depends on factors like strength, durability, and the purpose of the ball plunger.
Question: What is the standard size of a ball plunger?: Answer: The standard size of a ball plunger can vary depending on the manufacturer and application. However, they generally come in different diameters and lengths. Common diameters range from 3mm to 20mm, while lengths can range from 10mm to 50mm or more. These sizes are widely used, but it's important to note that specific industries or applications may have their own standard sizes based on their requirements.
Question: How much pressure does a plunger create?: Answer: The amount of pressure a plunger creates depends on various factors, including its design, size, and the force applied to it. Plungers typically generate pressure by compressing air or liquid trapped within a confined space. The specific pressure created can vary significantly. In household use, a plunger can create enough pressure to unclog a drain. However, in industrial applications, specialized plungers can generate much higher pressures to perform tasks such as hydraulic or pneumatic actuation.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

How can we improve?

Ball Plungers

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. M(mm)

Stroke S(mm)

Tip Material

Body Material

Lock

Initial Load (Range)(N)

Tip Heat Treatment

Main Body Surface Treatment

Tip Surface Treatment

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

Related Categories to Ball PlungersDanh mục liên quan đến Ball Plungers

FAQ Ball Plungers

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều