SANDVIK Holding Tools for O.D. Tuning

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	20 ～ 50	20 ～ 50

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Shank Tool Bit For Turning, R/L170.35

  SANDVIK

  T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	-	-	40	25

  From: 5,198,698 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,179,211 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter / Post-Grinding	Cable clamp	-	25

  From: 5,883,970 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN

  SANDVIK

  [Features]Extremely high clamp rigidityThe T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precisionHigh-precision machiningFor profile turning.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	32	25

  From: 4,252,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L

  SANDVIK

  [Features]Extremely high clamp rigidityThe T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precisionHigh-precision machiningFor profile turning.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	20 ～ 32	20 ～ 25

  From: 4,397,369 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

  SANDVIK

  Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12	12

  From: 4,739,186 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 4,681,093 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	No-hand	Outer Diameter / Profiling	Clamp-on	8.3	16

  From: 5,061,645 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	End Face	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik T-Max S Top Clamp Shank Bit

  SANDVIK

  [Features]· Turning bit for outer diameter machining[Applications]· For edge surface treatment

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	Outer Diameter	-	-	-

  From: 4,121,140 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System Stepping CoroTurn 107 Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	16	16

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  T-Max Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	40	25

  From: 7,457,547 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Shank Bit for O.D.

  SANDVIK

  Outer diameter turning shank tool bit that realizes high productivity, high efficiency and high quality machining solutions

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter / Profiling	Wedge Lock	32	32

  From: 4,559,740 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	32	36

  From: 7,494,355 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / Profiling / Chamfer	Cable clamp	32	32

  From: 6,784,805 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Negative Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,405,139 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Bit, Solid Boring Bit, Boring Bit Adapter

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 13,319,148 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for Turning Processing

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	-	-

  From: 13,833,100 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PSBNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter	Lever lock	16	16

  From: 3,097,514 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Left-hand	Outer Diameter / End Face / Chamfer	Lever lock	40	40

  From: 6,515,708 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 3,097,514 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / End Face / Profiling / Chamfer	-	-	-

  From: 13,147,830 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C3-MVJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDHNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDUNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	End Face	-	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DRSNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DSDNN

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter / Post-Grinding	-	-	-

  From: 8,694,972 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCL

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Left-hand	Outer Diameter / End Face / Profiling	-	-	-

  From: 10,821,561 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PSDNN

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter / Post-Grinding	-	-	-

  From: 10,095,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	-	-	-

  From: 17,567,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCR

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter / End Face / Profiling	-	-	-

  From: 10,956,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, 177.9

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	No-hand	End Face	-	20 ～ 25	9 ～ 13

  From: 4,102,268 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CSDPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / Post-Grinding	Clamp-on	-	25

  From: 3,824,136 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L	Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP	T-Max P Shank Tool Bit For Turning, R/L170.35	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2	Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L	Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN	Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11	Sandvik T-Max S Top Clamp Shank Bit	QS Holding System Stepping CoroTurn 107 Bit	T-Max Shank Bit	T-Max P Negative Shank Bit for O.D.	T-Max Shank Bit for Ceramic Tips	CORO-TURN RC, Shank Bit for Ceramic Tips	CORO-TURN RC, Shank Bit for Negative Tips	Shank Bit, Solid Boring Bit, Boring Bit Adapter	Tool Bit for Turning Processing	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Shank Tool Bit T-Max P Lever Clamp PSBNR/L	Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L	Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4	T-Max P Cutting Unit For Turning	T-Max P Cutting Unit For Turning, C3-MVJNR/L	T-Max P Cutting Unit For Turning, C-DDHNR/L	T-Max P Cutting Unit For Turning, C-DDJNR/L	T-Max P Cutting Unit For Turning, C-DDUNR/L	T-Max P Cutting Unit For Turning, C-DRSNR/L	T-Max P Cutting Unit For Turning, C-DSDNN	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	T-Max P Cutting Unit For Turning, C-PDJNR/L	T-Max P, Turning Cutting Unit, C8-PRSCL	T-Max P Cutting Unit For Turning, C-PSDNN	T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP	T-Max P, Turning Cutting Unit, C8-PRSCR	T-Max S Shank Tool Bit For Turning, 177.9	T-Max S Shank Tool Bit For Turning, CSDPR/L	T-Max S Shank Tool Bit For Turning, CTFPR/L
From	12,668,141 VND-	3,447,280 VND-	19,726,421 VND-	5,198,698 VND	4,307,846 VND	3,339,521 VND	4,179,211 VND	5,883,970 VND	8,453,730 VND-	4,252,526 VND-	4,397,369 VND-	4,739,186 VND	4,681,093 VND-	5,061,645 VND	3,339,521 VND	4,121,140 VND-	9,413,108 VND	7,457,547 VND	4,559,740 VND	7,494,355 VND	6,784,805 VND	3,405,139 VND-	13,319,148 VND-	13,833,100 VND-	3,447,280 VND	3,097,514 VND	6,515,708 VND	3,097,514 VND-	9,772,263 VND-	13,147,830 VND	7,915,072 VND	9,413,108 VND	9,413,108 VND	8,803,333 VND-	9,413,108 VND	8,694,972 VND	22,638,820 VND	10,783,648 VND	10,821,561 VND	10,095,240 VND-	17,567,820 VND	10,956,711 VND	4,102,268 VND-	3,824,136 VND-	3,447,280 VND-
Days to ShipSố ngày giao hàng	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s)	8 Day(s) or more	6 Day(s) or more	9 Day(s)	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	C (80° Diamond-Shape)	S (Rectangular)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	R (Circular)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	T (Triangle)	-	T (Triangle)	Other	T (Triangle)	R (Circular)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	S (Rectangular)	R (Circular)	T (Triangle)	S (Rectangular)	T (Triangle)
Applicable Chip Clearance Angle	-	Negative	Pozidriv	-	-	Pozidriv	Pozidriv	-	Negative	Pozidriv	Pozidriv	-	-	-	Pozidriv	-	-	Negative	Negative	-	-	Negative	-	-	Negative	Negative	Negative	Negative	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	No-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand	Right-hand / Left-hand	No-hand	Right-hand	-	Right-hand	Right-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Left-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	-	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling	Outer Diameter / Post-Grinding	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	End Face	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	End Face	Outer Diameter / End Face / Profiling	Outer Diameter / Post-Grinding	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Profiling	Outer Diameter / Post-Grinding	Outer Diameter	Outer Diameter / End Face / Profiling	End Face	Outer Diameter / Post-Grinding	End Face
Clamp Shape	Lever lock	Cable clamp	Clamp-on	-	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	-	Clamp-on	Clamp-on	Wedge Lock	Clamp-on	Cable clamp	Cable clamp	Clamp-on	Lever lock	Lever lock	Lever lock	Lever lock	Lever lock	Clamp-on	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Clamp-on	Clamp-on
Shank height(mm)	-	20 ～ 50	-	40	12 ～ 16	-	12 ～ 16	-	-	32	20 ～ 32	12	-	8.3	-	-	16	40	32	32	32	20 ～ 32	-	-	20	16	40	16 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	-	-
Shank width(mm)	-	20 ～ 50	-	25	12 ～ 16	-	12 ～ 16	25	-	25	20 ～ 25	12	-	16	-	-	16	25	32	36	32	20 ～ 32	-	-	20	16	40	16 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	9 ～ 13	25	-

Loading...Tải…