MITUTOYO Inner Diameter Measuring Instruments

• You can add up to 6 items per a category to the compare list. Compare

  

  468 Series, Digimatic Hole Test (3-Point Internal Micrometer) HTD-R

  MITUTOYO

  [Features]·Titanium coating is applied to the measuring surface.·Since two preset values for setting the base point can be stored, multiple actual measurement values such as settling can be stored to efficiently prepare for measurement.·A single button battery lasts for about 1.2 years (under normal use).·Highly efficient work is possible with the two length measurement systems, ABS and INC.·Protection rating IP65 has been achieved. It can be used in environments where cutting fluid is splashed.·It can measure up to near the bottom of a blind hole.·Equipped with a function lock function to prevent the reference from being changed due to erroneous operation.· Comes with a measurement data output terminal, allowing the configuration of statistical process management systems and measurement systems.·We have a convenient interface input tool that converts the measured data into keyboard signals and directly inputs them into the cells of commercially available spreadsheet software.·HTD Type Digimatic Hall Test[Measurement surface]High hardness steel titanium coat[Constant pressure device]Ratchet stop type[Accessories]1 battery (SR44)

  Calibration Certificate
  No

  From: 16,971,231 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  177 Series Set Ring

  MITUTOYO

  Used for base point confirmation of internal micrometer, hole test, borematic, cylinder gauge, etc.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  MITUTOYO

  • Three-point internal micrometer with large LCD readout. (Character height 7.4mm) • Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole. • One SR44 battery is required and battery life is approx. 1.2 years under normal use. • ABSolute and INCremental measurement modes allow highly efficient operation. • The IP65 protection rating allows the instrument to be used in the presence of splashing coolant. • Measurements can be made close to the bottom of a blind hole. • Deep holes can be measured by attaching an extension rod (optional). • A function lock prevents accidental change of reference point. • Measurement data output enables operation with Statistical Process Control (SPC)and measurement control systems. • An interface input tool is available for transferring measurement data, under keyboard control,directly to commercial spreadsheet software. • Interchangeable-Head Sets (interchangeable measuring heads type) covering an extended measuring range using multiple heads and Non-interchangeable-Head Sets are available.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 345, 145 — Caliper Type

  MITUTOYO

  • Carbide measuring faces. • Equipped with a constant measuring-force device. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker (more than 50mm), and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 345 — Caliper Type

  MITUTOYO

  • Carbide measuring faces. • Equipped with a constant measuring-force device. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker (more than 50mm), and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 12,691,666 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.95-18mm)

  MITUTOYO

  The dial indicator and the protection cover are optional.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — for Blind Holes(Measuring Range: 15-150mm)

  MITUTOYO

  • Capable of ID (inside diameter) measurement close to the bottom of a hole. • Carbide contact point ensuring high durability and wear resistance. • Grip is large and hollow to reduce effect of body heat on high-accuracy measurements. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Optional extension rods can be attached for measuring deep holes. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type

  MITUTOYO

  • Wide range of inside measurements possible by combining extension rods and anvilswith the micrometer head. • Two types of measuring faces are available; with or without carbide tip. (No. 337-102 onlyavailable with carbide tip.) • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer. • Order No. 337-102 features: · IP65 (water-proof) protection level that enables use in the presence of cutting fluid. · A large-character LCD display. · Storage of 2 preset values for use when setting to an inside length standard. · A function lock that prevents accidental changing of the reference setting during measurement. · An output port for measurement data that enables inclusion in a statistical process control or networked measurement system. · Ability to use Interface Input Tools that enable conversion of measurement data to keyboardsignals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  368 Series, Hole Test (2-/3-Point Type Internal Micrometer) D/E/HT-R

  MITUTOYO

  [Features]·It has a solid and precise structure.·It can measure up to near the bottom of a blind hole.·With a constant pressure device, stable measurement is possible with little variation between operators.·Titanium coating (measuring range of 6 mm or more) is applied to the measuring surface.·A three-point internal micrometer (measuring range of 6 mm or more) enables stable measurement by automatic centripetal action.

  Calibration Certificate
  -

  From: 7,974,577 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series, Cylinder Gauge with Micrometer Head CGM-X

  MITUTOYO

  [Features]·Measurement dimensions can be easily set with the micrometer head.·The effective stroke of the stylus has been expanded compared to conventional products.·The tip of the stylus is a cemented carbide ball, so it has excellent durability and wear resistance.·By attaching a sub-anvil, the measurement range can be easily expanded.

  Calibration Certificate
  -

  From: 7,951,905 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Replacement Washer

  MITUTOYO

  Parts for cylinder gauge, replacement washers.Inner diameter dimensions (mm): 3, 8Outer diameter dimensions (mm): 7

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Rod Type Inside Micrometer Set - Tubular Inside Micrometers SERIES 133 — Single Rod Type

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 12,269,600 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages

  MITUTOYO

  • These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement. • Up to four extension rods (250mm or 500mm) can be used for measuring at the bottom of a hole 2m deep. • ABS (ABSOLUTE) type bore gages are not subject to overspeed error. • The display and grip can be rotated up to 320 degrees and the display can be inclined up to90 degrees, so that it is easily readable from any direction. • The minimum value holding function provides easy measurement of hole diameter. • Setting the Bore Gage to a master value using a gauge block set allows quick and accurate setting. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gagebefore making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  526 Series, Small-Caliber Cylinder Gauge CG-A

  MITUTOYO

  Small diameter cylinder gauge. 526 series.

  Calibration Certificate
  -

  From: 7,668,398 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Anvil CG-S18A

  MITUTOYO

  Parts for cylinder gauges.[Features]The diameter of small holes can be measured with high precision.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 337 — Extension Rod Type

  MITUTOYO

  • Wide range of inside measurements possible by combining extension rods and anvils with the micrometer head. • Two types of measuring faces are available; with or without carbide tip. (No. 337-101/301/302/102/303/304 only available with carbide tip.) • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer. • Order No. 337-101/301/302/102/303/304

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  MITUTOYO

  • Interchangeable-Head Sets covering an extended measuring range using multiple heads

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series Cylinder Gauge

  MITUTOYO

  511 series cylinder gauge. CG type. Dial gauge and protective cover are not included.

  Calibration Certificate
  -

  From: 3,280,000 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Measurement Probe

  MITUTOYO

  Standard accessory for Inner Diameter Measuring Instrument

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Anvil CG-AX

  MITUTOYO

  Part for Cylinder gauge, anvil.Size (mm): 18 to 235

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Tool, Anvil, CGB

  MITUTOYO

  Anvil for inner diameter measuring tools.Size (mm): 35/50/100·45/60/110

  Calibration Certificate
  -

  From: 200,000 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Extension Rod

  MITUTOYO

  [Features]· Connect up to a total of 4 extension rods for a maximum length of 2 m.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 30-40mm)

  MITUTOYO

  • A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation. • Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole. • Three-Point contact measuring head enables highly repeatable measurement data to be obtained. • The ABSOLUTE linear encoder eliminates overspeed errors. • GO/NO-GO judgment function. • Dual HOLD function buttons, optimally located, enable high operability. • 330-degree rotatable display unit for easy reading at any angle. • Measurement can be made close to the bottom of a blind hole. 568-364 568-368 • Can measure deep holes by attaching an optional extension rod.

  Calibration Certificate
  -

  From: 32,150,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest SERIES 368 — Two-point Internal Micrometers

  MITUTOYO

  • Titanium-coated measuring pins on the threepoint type (over 6mm range models) provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole. • Three-point bore micrometer with measuring range 6mm or longer allows stable measurement through automatic centering. • Can measure deep holes using an Extension rod (optional) which is available on models over 6mm (.275") measuring range. • Ratchet Stop ensures constant-force, repeatable measurement. • Setting Rings for accurately setting the instrument are optional.

  Calibration Certificate
  -

  From: 7,974,577 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511(Measuring Range: 10-400mm)

  MITUTOYO

  • Longer plunger stroke with no affect on accuracy. • Carbide is used for the contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Optional extension rods can be attached for measuring deep holes. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  From: 3,067,949 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil for SERIES 511 — for Blind Holes

  MITUTOYO

  Standard accessories for SERIES 511 — for Blind Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micrometer head for SERIES 511 — with Micrometer Head.

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Sub-anvil for Bore Gages SERIES 511 — with Micrometer Head

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Sub-anvil for Bore Gages SERIES 511

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — for Small Holes

  MITUTOYO

  Standard Accessories for Bore Gages SERIES 511 — for Small Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Pin point for Bore Gages SERIES 526 — for Extra Small Holes

  MITUTOYO

  Standard Accessories for Bore Gages SERIES 526 — for Extra Small Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.037-0.7inch, Probing depth: 0.45-2.42inch)

  MITUTOYO

  • These gages are designed to measure the diameters of very small holes. The radial displacement of the split-ball anvil is converted to axial displacement of the measuring rod, which is shown on the dial indicator. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • An optional stand (215-120-10) is available for efficient measurement of multiple small holes.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Pipe Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring, CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — with Micrometer Head

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type

  MITUTOYO

  • World's highest performing micrometer overall. • Extended battery life of approximately 2.4 years. • Ergonomic anti-slip frame cover and front panel for more comfortable hand-held measurements. • Ratchet thimble provides better operability for one-handed operation. • Oil-resistant material used for all plastic parts. • Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. • Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. • Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble. • Measuring faces: Carbide

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)

  MITUTOYO

  • A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation. • Titanium-coated measuring pins provide excellent durability and impact resistance andallow the instrument to measure right to the bottom of a blind hole. • Three-Point contact measuring head enables highly repeatable measurement data to be obtained. • The ABSOLUTE linear encoder eliminates overspeed errors. • GO/NO-GO judgment function. • Dual HOLD function buttons, optimally located, enable high operability. • 330-degree rotatable display unit for easy reading at any angle. • Measurement can be made close to the bottom of a blind hole. • Can measure deep holes by attaching an optional extension rod. • Digimatic output port enables inclusion in a statistical process control or networkedmeasurement system. • Interface Input Tools are available that enable the conversion of measurement datato keyboard signals that are then directly input to cells in off-the-shelf spreadsheet softwaresuch as Excel. • Interchangeable-Head Bore Gages are available in part sets and full sets.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest (Type II) SERIES 368 — Three-point Internal Micrometers

  MITUTOYO

  • Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool. • Same accuracy as the titanium-coated Holtest models. • Constant-force device allows repeatable measurement. • Can measure deep holes using an Extension Rod (optional).

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  MITUTOYO

  • Titanium-coated measuring pins on the threepoint type (over 6mm range models)provide excellent durability and impact resistance and allow the instrument to measure right tothe bottom of a blind hole. • Three-point bore micrometer with measuring range 6mm or longer allows stable measurementthrough automatic centering. • Can measure deep holes using an Extension rod (optional) which is available on modelsover 6mm (.275") measuring range. • Ratchet Stop ensures constant-force, repeatable measurement. • Setting Rings for accurately setting the instrument are optional.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series, Short Leg Cylinder Gauge CGB-X

  MITUTOYO

  Short leg cylinder gauge. 511 series.

  Calibration Certificate
  -

  From: 3,589,154 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Extension Rod

  MITUTOYO

  By connecting to an inner diameter measuring tool, it is possible to measure deep holes.Length (mm): 100 to 150

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type

  MITUTOYO

  • Excellent water- and drip-proof characteristics (IP43).• Smooth movement thanks to the improved design of bush and stem.• Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant.• Lightweight type (70g).

  Calibration Certificate
  -

  From: 1,667,700 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  526 Series Small-Caliber Cylinder Gauge CG-A Anvil

  MITUTOYO

  [Features]The diameter of small holes can be measured with high precision.Measurement range (mm): 7 to 18

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	468 Series, Digimatic Hole Test (3-Point Internal Micrometer) HTD-R	177 Series Set Ring	Digimatic Holtest SERIES 468 — Three-point Internal Micrometers	Inside Micrometers SERIES 345, 145 — Caliper Type	Inside Micrometers SERIES 345 — Caliper Type	Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.95-18mm)	Bore Gages SERIES 511 — for Blind Holes(Measuring Range: 15-150mm)	Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type	368 Series, Hole Test (2-/3-Point Type Internal Micrometer) D/E/HT-R	511 Series, Cylinder Gauge with Micrometer Head CGM-X	Inner Diameter Measuring Instrument, Replacement Washer	Single Rod Type Inside Micrometer Set - Tubular Inside Micrometers SERIES 133 — Single Rod Type	Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages	526 Series, Small-Caliber Cylinder Gauge CG-A	Inner Diameter Measuring Instrument, Anvil CG-S18A	Tubular Inside Micrometers SERIES 337 — Extension Rod Type	Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers	511 Series Cylinder Gauge	Inner Diameter Measuring Instrument, Measurement Probe	Inner Diameter Measuring Instrument, Anvil CG-AX	Inner Diameter Measuring Tool, Anvil, CGB	Extension Rod	ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 30-40mm)	Holtest SERIES 368 — Two-point Internal Micrometers	Bore Gages SERIES 511(Measuring Range: 10-400mm)	Anvil for SERIES 511 — for Blind Holes	Micrometer head for SERIES 511 — with Micrometer Head.	Sub-anvil for Bore Gages SERIES 511 — with Micrometer Head	Sub-anvil for Bore Gages SERIES 511	Spanner for Bore Gages SERIES 511 — for Small Holes	Pin point for Bore Gages SERIES 526 — for Extra Small Holes	Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.037-0.7inch, Probing depth: 0.45-2.42inch)	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)	Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)	Spanner for Bore Gages SERIES 511 — with Micrometer Head	Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type	Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)	ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)	Holtest (Type II) SERIES 368 — Three-point Internal Micrometers	Holtest SERIES 368 — Three-point/Two-point Internal Micrometers	511 Series, Short Leg Cylinder Gauge CGB-X	Inner Diameter Measuring Instrument, Extension Rod	SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type	526 Series Small-Caliber Cylinder Gauge CG-A Anvil
From	16,971,231 VND-	-	-	-	12,691,666 VND-	-	-	-	7,974,577 VND-	7,951,905 VND-	-	12,269,600 VND-	-	7,668,398 VND-	-	-	-	3,280,000 VND-	-	-	200,000 VND-	-	32,150,000 VND	7,974,577 VND	3,067,949 VND-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	3,589,154 VND-	-	1,667,700 VND	-
Days to ShipSố ngày giao hàng	2 Day(s) or more	9 Day(s) or more	46 Day(s) or more	46 Day(s) or more	46 Day(s)	46 Day(s) or more	Quote	46 Day(s) or more	2 Day(s) or more	9 Day(s) or more	2 Day(s) or more	46 Day(s)	Quote	9 Day(s)	9 Day(s) or more	Quote	46 Day(s) or more	2 Day(s) or more	Quote	2 Day(s) or more	2 Day(s) or more	Quote	46 Day(s)	2 Day(s) or more	2 Day(s) or more	9 Day(s) or more	Quote	Quote	Quote	Quote	46 Day(s) or more	Quote	46 Day(s) or more	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Quote	Quote	46 Day(s) or more	2 Day(s) or more	Quote	46 Day(s)	9 Day(s) or more
Calibration Certificate	No	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…