(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Dial Gauges（Application：Standard Type）

Dial gauges are measuring instruments that can accurately measure minute lengths and displacements. Unlike other measuring instruments that directly measure numerical values, they are used for measuring the difference compared to a reference or correcting parallelism. Dial gauges are available in various types, including a standard type and lever type. The standard type uses gears and a lever to convert the linear motion of a spindle into rotational motion, mechanically expand this motion and indicate the displacement with a scale. They are suited to observing significant changes. The lever-type uses sector gears and crown gears to expand the motion. While the lever-type has a higher resolution than the standard type, the variation is converted into the rotational motion of the lever, so a big change may be indicated with a smaller figure than the actual number. A single reading of a standard-type dial gauge is 0.01 mm, but there are also special dial gauges with a single reading of 0.001 mm. In addition to an analog type where measurements are read on a scale, a digital type is available as well.

Show More Detail Show More Detail

Brand	(2) (0) AS ONE (0) ASIAN FIRST (0) BLACK DIAMOND (1) BLUEBIRD (3) BLUETEC (0) CITIZENSEIMITSU (3) ESCO (0) KEUMKANG (0) KROEPLIN (0) MAHR (1) MITUTOYO (32) NIIGATA SEIKI (SK) (6) NOGA JAPAN (1) OBISHI KEIKI SEISAKUSHO (0) OZAKI MFG (PEACOCK) (11) RIKEN KEISOKUKI (0) SHINWASOKUTEI (1) TECLOCK (5)
CAD	2D 3D
Days to Ship	All Same day 2 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less Others

66 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543

MITUTOYO

• The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Digital	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 46 Day(s) or more

46 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)

MITUTOYO

• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B • ABS (absolute) sensor These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) sensor, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this sensor ensures that overspeed errors do not occur, which improves reliability. • Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Digital	-	-	-	-	-

From: 3,716,667 VND
Days to Ship: Số ngày giao hàng: Quote

Quote

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, Dial comparator (Point Measuring Instrument)

Dial Gauge, Dial comparator (Point Measuring Instrument)

MAHR

[Features]·Innovative scale panel design.·In order to improve repeatability and durability, rubies are used for all internal friction parts.·The measuring spindle uses a patented special bearing.·The shock prevention mechanism automatically disconnects the mechanism when the measurement range is exceeded to prevent failure.·A long-selling product that was developed and sold 70 years ago.·Large, high-contrast dial.·Adjustable Tolerance Marker.·Lock type fine adjustment screw.·Both the mounting shank and measuring spindle are made of hardened stainless steel.·Insensitive to lateral forces (lateral play) acting as a measuring spindle.·Maximum sensitivity and accuracy are ensured only by excellent travel performance and the use of precision gears and pinions.·The measuring spindle can be retracted with either a cable release screw or a lift knob.[Applications]·1µm, 0.5µm precision measurement.·Precision machined product manufacturing field.·Precision equipment manufacturing and automobile parts manufacturing fields.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.0005 ～ 0.001	Dial	0–1	-	-	Balance Scale	-

From: 8,535,465 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge 543 Series, Digimatic Indicator ID-H

MITUTOYO

World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.0005/0.001 switching	Digital	21 to 50	NA	Available	-	-

From: 13,252,500 VND
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type

MITUTOYO

• The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Digital	-	NA	-	-	-

From: 7,800,000 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Back Plunger Type Dial Indicator

OZAKI MFG (PEACOCK)

[Features]· A dial gauge with a spindle that operates at an angle perpendicular to the pointer scale.· The back plunger dial gauge is appropriate for use as a level for machining tool tables or in cramped locations where scale plates are difficult to see.· Multipoint measurement jig.· Suitable for installation to inspection jigs.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	1.1 to 5	-	-	Continuous Scale / Reverse Scale	-

From: 2,361,815 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Inside Gauge

OZAKI MFG (PEACOCK)

Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	51 to 100 ～ 101 or More	-	-	Balance Scale	-

From: 5,079,692 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, Digital Indicator

NIIGATA SEIKI (SK)

Dial gauge that is ideal for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.[Features]· It is a high cost performance model with an easy-to-see digital display.· With hold function.· With auto off function. (Approximately 5 minutes)· Scale interval 0.01 mm, measurement range 12.7 mm.· Comes with two back covers, a flat type and a type with lug.[Applications]· Can be used for displacement measurements such as plane contour, workpiece mounting quality evaluation, perpendicularity, etc.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Digital	6~20	NA	NA	-	No

From: 2,031,736 VND
Days to Ship: Số ngày giao hàng: Same day

Same day

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation

MITUTOYO

• Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle is made of high-strength quench hardened stainless steel suitable for heavy duty use.• A carbide contact point is used.• The grand gear is made of stainless steel with high resistance to wear and deformation.• Application of a hard coating on the surface of the crystal makesthe gauge highly scratch and chemical-resistant.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001 ～ 0.01	Dial	1.1 to 5 ～ 6~20	NA	NA	Continuous Scale / Balance Scale	-

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Snap Gage(Measuring Range: 0-300mm)

MITUTOYO

• Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes. • Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils. • Anvil retracting stroke: 2mm/.080”Anvil positioning range: 25mm/ 1” • Adjustment nut: adjusts the measuring range. • Clamp: adjustment nut • Flatness of measuring face: 1μm • Stability of indication: 2μm or less (stability of indicators is not included) • The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 46 Day(s) or more

46 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)

MITUTOYO

Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type(Repeatability(µm): ±0.3/1/2/3)

MITUTOYO

ANSI/AGD Type Metric Dial Indicator(Thread Contact Point Compatible Type)[Features]· Range (Range/rev):0.08mm(0.1mm) to 50mm(1mm)

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	-	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Regular Dial Gauge 2 Series, Under 1 Turn Type

MITUTOYO

It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001 ～ 0.1	Dial	0–1 ～ 1.1 to 5	NA	NA	Balance Scale	-

Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Long stroke dial gauge Graduation: 0.01mm, 0.05mm, 0.1mm

OZAKI MFG (PEACOCK)

[Features]· The most widely used long stroke dial gauge with scale intervals of 0.01 mm/0.05 mm/0.1 mm. With spindle lifting lever, middle 2 needle type is also available.· Select from a wide range of device models to suit the application.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Limit stickers are included as standard with all models.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01 ～ 0.1	Dial	6~20 ～ 51 to 100	-	-	Continuous Scale / Reverse Scale	-

From: 1,964,048 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

OZAKI MFG (PEACOCK)

The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.[Features]· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001	Dial	0–1 ～ 1.1 to 5	Available	-	Continuous Scale / Balance Scale	-

From: 2,704,500 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Pocket Type Dial Test Indicator SERIES 513

MITUTOYO

• Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Large Dial Gauge, 3/4 Series Long Stroke

MITUTOYO

The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 51 to 100	NA	NA	Continuous Scale / Balance Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Signal indicator 2S series

CITIZENSEIMITSU

[Features]·Large, easy-to-read display.·Rubber bellows can be installed as an option on the 2S type.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	2 ～ 20	Dial	-	-	-	Balance Scale	-

From: 11,304,238 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Standard Dial Gauge

TECLOCK

[Features]· High-precision dial gauge that can be read in units of 0.01 mm.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	1.1 to 5 ～ 6~20	-	-	Continuous Scale	-

From: 1,277,496 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, Guideline Microindicator Mumetron

CITIZENSEIMITSU

The Mu-METRON series is a full-fledged industrial measuring instrument designed to meet the high-precision measurement needs, achieving high precision, high sensitivity and high stability. A buffer mechanism is used for outstanding durability and shock resistance as well.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.5 ～ 1	Dial	-	-	-	Balance Scale	-

From: 9,034,880 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)

OZAKI MFG (PEACOCK)

[Features]· The most widely used dial gauge with scale intervals of 0.01 mm. Select from a wide range of devices to suit the application.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	0–1 ～ 6~20	Available	-	Continuous Scale / Reverse Scale	-

From: 965,106 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Signal Gauge

OZAKI MFG (PEACOCK)

The spindle has excellent durability due to the bearing equipped on its moving part. The floating circuit design blocks other leakage current.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01 ～ 0.05	Dial	0–1 ～ 1.1 to 5	-	Available	Continuous Scale	-

From: 10,927,969 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Pic-Test New Pic-Test PC/PCN

OZAKI MFG (PEACOCK)

Improved abrasion resistance with a probe with a ruby ball.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	0–1	NA	NA	Balance Scale	-

From: 2,922,990 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge, Pocket Type Dial Test Indicator Series 513

MITUTOYO

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Dial Snap Gage(Measuring Range: 0-12inch)

MITUTOYO

• Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes. • Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils. • Anvil retracting stroke: 2mm/.080” Anvil positioning range: 25mm/ 1” • Adjustment nut: adjusts the measuring range. • Clamp: adjustment nut • Flatness of measuring face: 1μm • Stability of indication: 2μm or less (stability of indicators is not included) • The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge 0.001 mm

MISUMI

An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001	Dial	0–1	NA	NA	Continuous Scale	-

From: 1,283,049 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Standard Type Dial Gauge 73750

SHINWASOKUTEI

[Features]・ It comes with logs that is convenient for attaching to a magnetic stand[Applications]・ For flatness measurement, parallelism measurement, eccentricity measurement, comparative measurement

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	6~20	NA	NA	Continuous Scale	-

From: 1,276,356 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

9 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Digital S Line Indicator (IP65)

NIIGATA SEIKI (SK)

Water- and dustproof dial gauge with an IP65 waterproof rating.[Features]· A compact digital indicator suitable for use in tight spaces.· Minimum display switchable between 0.01 and 0.001 mm. (DEI-233S2 only)· With a function to switch measurement direction (+ -).· With preset function.· With auto off function. (Approximately 4 hours)[Applications]· Can be used securely at work sites exposed to dust and cutting fluid.· Used for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01/0.001 (Switchable)	Digital	6~20	Available	NA	-	-

From: 16,409,363 VND
Days to Ship: Số ngày giao hàng: 12 Day(s) or more

12 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Regular Dial Gauge 2 Series, Long Stroke Type

MITUTOYO

2 Series Regular Dial Gauge, Long Stroke Type

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	6~20 ～ 21 to 50	Available / NA	NA	Continuous Scale / Reverse Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type

MITUTOYO

Dial gauge with a compact design. Does not take up space when attached to jigs.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.002 ～ 0.01	Dial	0–1 ～ 1.1 to 5	NA	NA	Continuous Scale / Balance Scale	-

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Durometer

NIIGATA SEIKI (SK)

Dial gauge that measures the hardness of rubber and plastics, conforming to JIS and ISO standards.[Features]· Conforms to the following standards regarding the shape of the pushing needle, dimensions of the pressing surface, and spring force.· JIS K 6253 (hardness test method for vulcanized rubber).· ISO 7619 (E).[Applications]· It is used as a hardness meter to measure the hardness of rubber/plastic.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	NA	NA	Continuous Scale	-

From: 4,545,992 VND
Days to Ship: Số ngày giao hàng: 9 Day(s)

9 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Digital Indicator (Configuration Results / Configuration Certificate / Traceability Flow Chart Included)

NIIGATA SEIKI (SK)

[Features]· The digital display is easy to see.· With hold function.· Equipped with auto off function (after about 5 minutes).· Digital indicator with scale intervals of 0.01 mm and measurement range of 12.7 mm.· Comes with two back covers, a flat type and a type with lug.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Digital	6~20	NA	NA	-	Yes

From: 3,256,299 VND
Days to Ship: Số ngày giao hàng: 13 Day(s) or more

13 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Dial Gauge Flat Back Cover with Handles

MITUTOYO

A flat rear cover designed for the dial gauge.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	1.1 to 5	-	-	Balance Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Dial gauge

NOGA JAPAN

[Specifications]·NOGAWATERS dial gauge.·Stem diameter: ⌀8 mm·0.01 mm scale, 0 to 10 mm

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Dial	-	NA	NA	Continuous Scale	-

From: 1,599,876 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

SERIES 3, 4 — Long StrokeType, Large Diameter(Measuring Range: 0.025-4inch)

MITUTOYO

• Dial indicators with a large-diameter dial face for easy reading. • Models with longer measuring ranges are also available. • All types are supplied with limit markers and a bezel clamp as standard. • Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use. • The bezel clamp and lifting lever (optional)*1 can be attached to either the right or left side. These parts can be easily installed and removed without tools. *1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10 and 4046S.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	-	-	-	-	-	-

Quote

You can add up to 6 items per a category to the compare list. Compare

ABSOLUTE Digimatic Indicator ID-U — Slim and Economical Design SERIES 575-12□

MITUTOYO

• General purpose indicator with the measuring range of 25.4mm/ 1”. • Cost-effective and user-friendly type which is equipped with the basic functions necessary. • The ABS (absolute) sensor restores the last origin position automatically when the indicatoris turned on, and realizes high reliability by eliminating over-speed errors. • Battery life of 20,000 hours in continuous use has been achieved. • Easy-to-read large LCD readout with the character height of 8mm. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	-	Digital	-	-	-	-	-

From: 4,995,000 VND
Days to Ship: Số ngày giao hàng: 46 Day(s)

46 Day(s)

You can add up to 6 items per a category to the compare list. Compare

Long stroke dial gauge

MISUMI

Providing a common long stroke dial gauge at a price like this [C-Value]

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	21 to 50	NA	NA	Continuous Scale	-

From: 1,377,119 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type

MITUTOYO

Dial Indicators Series 2- Metric Standard Type [FEATURES]Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.A carbide contact point is used.The grand gear uses stainless steel that is resistant to wear and deformation.Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.[Usage]· For comparative measurement. Installation on jigs.[Specification]· Measurement Range (mm): 0 to 10· Minimum Display (mm): 0.010· Graduation Specification: 0-100· Mount Shaft Diameter (mm): 8·Measuring Force (N): 2.5 or less·Dial diameter: 57 mm

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001	Dial	0–1	Available	NA	Continuous Scale / Balance Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

2 Series Standard Dial Gauge (Guide Adjustment Type)

MITUTOYO

Rotate the head knob to adjust the pointer position independent of the vertical movement of the spindle.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	6~20	NA	NA	Continuous Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type

MITUTOYO

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.001	Dial	0–1	Available	NA	Balance Scale	-

Quote

You can add up to 6 items per a category to the compare list. Compare

Standard Dial Gauge (Long Stroke Type)

TECLOCK

[Features]· A shock-absorbing mechanism (shock-proofing) is used to protect the parts of the mechanism, such as gears, in the pursuit of a longer operational life.· A long stroke dial gauge with measuring ranges of 20 mm and 30 mm.[Applications]· For tasks requiring long strokes such as machine dimensioning and incorporation into dedicated machines.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	6~20 ～ 21 to 50	-	-	Continuous Scale	-

From: 2,136,768 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

8 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Compact Dial Gauge (Back lid with lug type/Flat back lid type)

Compact Dial Gauge (Back lid with lug type/Flat back lid type)

TECLOCK

[Features]· Small, lightweight, and easy to use with a high level of precision, it is widely used as a measurement instrument for measuring length in a variety of fields.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01 ～ 0.1	Dial	1.1 to 5 ～ 6~20	-	-	Continuous Scale	-

From: 1,665,821 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

0.1 mm Scale Dial Indicator

TECLOCK

[Features]· High-precision dial gauge that can be read in units of 0.1 mm.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.· Used for rough dimension measurement of woodwork and rubber material and judgment of deviation in dimensions.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.1	Dial	6~20	-	-	Continuous Scale	-

From: 1,510,375 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Back Plunger Type Dial Gauge

TECLOCK

A dial gauge with a scale plate set parallel to the measuring surface.[Features]·A type in which the scale plate is parallel to the measuring surface and can be viewed from above.·Convenient for gear tooth bottom measurement and runout measurement.[Applications]·Unlike general dial gauges, it can be used in narrow spaces.·For leveling smooth surfaces and reading from the front of the measurement point.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	0.01	Dial	1.1 to 5	-	-	Continuous Scale	-

From: 2,798,335 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Signal indicator 1S series

CITIZENSEIMITSU

This smaller compact type can also be installed in even narrower locations. Durability - A ball slide has been adopted for the spindle part to increase the durability. Environmental resistance - Improved dust-proof and drip-proof properties. Safe for use in machining/assembling sites, etc. as well.

Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
Standard Type	1 ～ 20	Dial	-	-	-	Balance Scale	-

From: 14,071,213 VND
Days to Ship: Số ngày giao hàng: 4 Day(s) or more

4 Day(s) or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MAHR	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	CITIZENSEIMITSU	TECLOCK	CITIZENSEIMITSU	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MISUMI	SHINWASOKUTEI	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	MITUTOYO	NOGA JAPAN	MITUTOYO	MITUTOYO	MISUMI	MITUTOYO	MITUTOYO	MITUTOYO	TECLOCK	TECLOCK	TECLOCK	TECLOCK	CITIZENSEIMITSU
Product SeriesDòng sản phẩm	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)	Dial Gauge, Dial comparator (Point Measuring Instrument)	Dial Gauge 543 Series, Digimatic Indicator ID-H	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	Back Plunger Type Dial Indicator	Dial Inside Gauge	Dial Gauge, Digital Indicator	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Snap Gage(Measuring Range: 0-300mm)	Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)	ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type(Repeatability(µm): ±0.3/1/2/3)	Regular Dial Gauge 2 Series, Under 1 Turn Type	Long stroke dial gauge Graduation: 0.01mm, 0.05mm, 0.1mm	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	Pocket Type Dial Test Indicator SERIES 513	Large Dial Gauge, 3/4 Series Long Stroke	Signal indicator 2S series	Standard Dial Gauge	Dial Gauge, Guideline Microindicator Mumetron	Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)	Signal Gauge	Pic-Test New Pic-Test PC/PCN	Dial Gauge, Pocket Type Dial Test Indicator Series 513	Dial Snap Gage(Measuring Range: 0-12inch)	Dial Gauge 0.001 mm	Standard Type Dial Gauge 73750	Digital S Line Indicator (IP65)	Regular Dial Gauge 2 Series, Long Stroke Type	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Durometer	Digital Indicator (Configuration Results / Configuration Certificate / Traceability Flow Chart Included)	Dial Gauge Flat Back Cover with Handles	Dial gauge	SERIES 3, 4 — Long StrokeType, Large Diameter(Measuring Range: 0.025-4inch)	ABSOLUTE Digimatic Indicator ID-U — Slim and Economical Design SERIES 575-12□	Long stroke dial gauge	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	2 Series Standard Dial Gauge (Guide Adjustment Type)	2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type	Standard Dial Gauge (Long Stroke Type)	Compact Dial Gauge (Back lid with lug type/Flat back lid type)	0.1 mm Scale Dial Indicator	Back Plunger Type Dial Gauge	Signal indicator 1S series
From		3,716,667 VND	8,535,465 VND	13,252,500 VND	7,800,000 VND	2,361,815 VND	5,079,692 VND	2,031,736 VND						1,964,048 VND	2,704,500 VND			11,304,238 VND	1,277,496 VND	9,034,880 VND	965,106 VND	10,927,969 VND	2,922,990 VND			1,283,049 VND	1,276,356 VND	16,409,363 VND			4,545,992 VND	3,256,299 VND		1,599,876 VND		4,995,000 VND	1,377,119 VND				2,136,768 VND	1,665,821 VND	1,510,375 VND	2,798,335 VND	14,071,213 VND
Days to ShipSố ngày giao hàng	46 Day(s) or more	Quote	6 Day(s) or more	9 Day(s)	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	Same day	9 Day(s) or more	46 Day(s) or more	Quote	Quote	Same day or more	4 Day(s) or more	4 Day(s) or more	Quote	Quote	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	8 Day(s) or more	Quote	Quote	4 Day(s) or more	9 Day(s) or more	12 Day(s) or more	Quote	8 Day(s) or more	9 Day(s)	13 Day(s) or more	Quote	6 Day(s) or more	Quote	46 Day(s)	4 Day(s) or more	Quote	Quote	Quote	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more
Application	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type
Scale interval minimal display(mm)	-	-	0.0005 ～ 0.001	0.0005/0.001 switching	0.01	0.01	0.01	0.01	0.001 ～ 0.01	-	-	-	0.001 ～ 0.1	0.01 ～ 0.1	0.001	-	0.001 ～ 0.01	2 ～ 20	0.01	0.5 ～ 1	0.01	0.01 ～ 0.05	0.01	-	-	0.001	0.01	0.01/0.001 (Switchable)	0.01	0.002 ～ 0.01	-	0.01	0.01	-	-	-	0.01	0.001	0.01	0.001	0.01	0.01 ～ 0.1	0.1	0.01	1 ～ 20
Display Method	Digital	Digital	Dial	Digital	Digital	Dial	Dial	Digital	Dial	Dial	Dial	-	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Digital	Dial	Dial	Dial	Digital	Dial	Dial	-	Digital	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial
Maximum Measurement Length (Range Selection)(mm)	-	-	0–1	21 to 50	-	1.1 to 5	51 to 100 ～ 101 or More	6~20	1.1 to 5 ～ 6~20	-	-	-	0–1 ～ 1.1 to 5	6~20 ～ 51 to 100	0–1 ～ 1.1 to 5	-	0–1 ～ 51 to 100	-	1.1 to 5 ～ 6~20	-	0–1 ～ 6~20	0–1 ～ 1.1 to 5	0–1	-	-	0–1	6~20	6~20	6~20 ～ 21 to 50	0–1 ～ 1.1 to 5	-	6~20	1.1 to 5	-	-	-	21 to 50	0–1	6~20	0–1	6~20 ～ 21 to 50	1.1 to 5 ～ 6~20	6~20	1.1 to 5	-
Waterproof Function	-	-	-	NA	NA	-	-	NA	NA	-	-	-	NA	-	Available	-	NA	-	-	-	Available	-	NA	-	-	NA	NA	Available	Available / NA	NA	NA	NA	-	NA	-	-	NA	Available	NA	Available	-	-	-	-	-
Output terminal for measuring data: with or without	-	-	-	Available	-	-	-	NA	NA	-	-	-	NA	-	-	-	NA	-	-	-	-	Available	NA	-	-	NA	NA	NA	NA	NA	NA	NA	-	NA	-	-	NA	NA	NA	NA	-	-	-	-	-
Scale type	-	-	Balance Scale	-	-	Continuous Scale / Reverse Scale	Balance Scale	-	Continuous Scale / Balance Scale	-	-	-	Balance Scale	Continuous Scale / Reverse Scale	Continuous Scale / Balance Scale	-	Continuous Scale / Balance Scale	Balance Scale	Continuous Scale	Balance Scale	Continuous Scale / Reverse Scale	Continuous Scale	Balance Scale	-	-	Continuous Scale	Continuous Scale	-	Continuous Scale / Reverse Scale	Continuous Scale / Balance Scale	Continuous Scale	-	Balance Scale	Continuous Scale	-	-	Continuous Scale	Continuous Scale / Balance Scale	Continuous Scale	Balance Scale	Continuous Scale	Continuous Scale	Continuous Scale	Continuous Scale	Balance Scale
Calibration Certificate	-	-	-	-	-	-	-	No	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Yes	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Application
- Standard Type
- Lever Type (Indicator)
- Caliper Type
- Thickness type
- linear gauge
- Dial Gauge Stand
- Probe
- Parts
Images

ClearTrống

Scale interval minimal display(mm)
0.0005

0.0005/0.001 switching

0.001

0.001/0.01 switching

0.002

0.005

0.01

0.01/0.001 (Switchable)

0.02

0.025

0.05

0.1

0.5

1

2

10

20
ClearTrống

Display Method
- Dial
- Digital
ClearTrống

Maximum Measurement Length (Range Selection)(mm)
0~0.2

0~0.8

0–1

0~10

0~12.7

0~20

0~25

0~30

0~50

1.1 to 5

6~20

10~30

20~40

21 to 50

25~50

30~50

40~60

50~75

51 to 100

75~100

101 or More
ClearTrống

Waterproof Function
- Available
- NA
ClearTrống

Output terminal for measuring data: with or without
- Available
- NA
ClearTrống

Scale type
- Continuous Scale
- Balance Scale
- Reverse Scale
ClearTrống

Calibration Certificate
- Yes
- No
ClearTrống

Related Categories to Dial GaugesDanh mục liên quan đến Dial Gauges

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

How can we improve?

Dial Gauges（Application：Standard Type）

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Application

Scale interval minimal display(mm)

Display Method

Maximum Measurement Length (Range Selection)(mm)

Waterproof Function

Output terminal for measuring data: with or without

Scale type

Calibration Certificate

Related Categories to Dial GaugesDanh mục liên quan đến Dial Gauges

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều