(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more
Precision Machine Vises
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
146 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
MISUMI
A highly accurate V block which is essential for processing round products or chamfering with vises. The dimensions can be freely specified
Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NABEYA
[Features]· Made of fully quenched materials, this is a precision tool that is finished by polishing.· The accuracy is within 5 microns in both squareness and parallelism.· Each machine comes with a beautiful wooden box case.
From: 36,363,808 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Maker's Vise Wedge locking tool
NABEYA
[Features]· The accuracy is higher than the former JIS 0 class.· Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.· Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.· Back surface has a guide block so precision can be easily improved
From: 34,217,600 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VERTEX
From: 6,257,772 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Drilling Machine Vise "F Type"
TRUSCO NAKAYAMA
[Features]· Cast iron, so it is unlikely to be damaged due to heavy-duty work.· Uses fall-prevention handlebar.
From: 1,833,145 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Loctite FA Precision Machine Vise
NABEYA
[Features]· Single units, multiple units, and connected use are possible.· The parallel accuracy is within 0.01.· The lifting prevention mechanism suppresses the lifting of workpieces.· Higher accuracy than the old JIS O class.· The body and fixed jaw are integrally molded to maintain high rigidity.· The sliding surface has excellent wear resistance as it has been flame quenched (HRC45).· The body is made of a ductile material that prevents warpage when tightened.· The opening is nearly doubled compared with vises of the same class, making it capable of clamping large workpieces.· It has a large opening depth and can securely tighten tall workpieces.
From: 36,151,353 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Block for Vises - Plain Model【2 Pieces Per Package】
MISUMI
[Features]·Parallel block that allows you to specify the height in 1 mm increments and freely adjust the gripping width of the workpiece·Raw material type that is safe even if tool interferes and hardening material type with little settling are available
Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Durable and tough design for each part.· Attaches to milling machines and is mainly used for rough machining.
From: 7,549,205 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYORITSU SEIKI
[Features]· Large tightening force with our original toggle mechanism.· Will not loosen right away even if the air supply is cut off during use.· Valve removal is easy and it can also be used to remotely control other air valves.· Can also be used as a hand tightening vise.[Applications]· From milling work to drilling machine work.
From: 85,529,514 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
You can slide and fix the jaws with just a hex key without the need to replace pins.No groove for clamps Accessories: Case
From: 5,966,280 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAKAESEIKI
[Features]· SKS steel is whole surface hardening (HRC62°) and squareness and parallelism on each side are finished with high-precision grinding.
From: 16,318,368 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAKAESEIKI
[Features]· A screw type precision vise machined with high accuracy.· Maximum workpiece size is 150 mm.The material used is SKS-3 with a hardening hardness of HRC62°.
From: 19,051,480 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAKAESEIKI
[Features]· Sine vise that is easy to use with high accuracy. The material used is SKS-3. Hardening hardness is set to HRC62°.· Incline from 0 to 45° and suitable for precision angle grinding of small accessories.· Able to set highly accurate angle setting, since it is the sign vise that a block gauge is used.
From: 48,055,928 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BLUETEC
From: 1,588,290 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】・Jaw width-70mm・Opening-80mm・Weight-4.0kg ・Alloy steel
From: 12,030,216 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 999,335 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Vise (Wrench Tightening Type) Quick Shift/Lift Prevention Structure Type
TRUSCO NAKAYAMA
[Features]· Precision finishing by total quenching, total grinding.· Precision can be retained for a long period of time in order to prevent uplift.· Excellent squareness and parallelism enable super-precise processing.[Applications]· It is secured to an electromagnetic chuck and used in precision machining.
From: 8,107,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VERTEX
From: 23,841,860 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
VERTEX
From: 6,159,824 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
SUPER TOOL
[Features]· It moves straight up and down smoothly.· Built-in bearing allows level adjustments to be made with minimal force.· Ball swivel can be set to the desired angle.
From: 5,317,846 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Vise (for ultra-precision machining)
SUPER TOOL
[Features]· A precision vise for ultra-precision finishing.· Can be utilized for a wide range of grinding, cutting, and drilling.· The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw, or the lengthwise/crosswise direction (SPV80-150).· Sub-zero treatment minimizes aging deterioration.
From: 43,409,285 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
[Specifications]·ESCO precision machine vise, drill press vise.·Side: Flat type· Material: Cast iron
From: 3,541,741 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】・Cast iron・The shape of the mount base differs with dim.・Jaw width…75mm・Max opening…76mm・Weight…4kg
From: 2,567,864 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Block (Not Quenched), Stepped Model
MISUMI
[Features]·With raw material, it is easy to avoid tool breakage during processing[Application]·Useful for drilling through hole close to flange of a workpiece
Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Loctite Precision Machine Vise
NABEYA
The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.
From: 23,710,610 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VERTEX
From: 51,964,864 VND Days to Ship: Số ngày giao hàng: 63 Day(s)
63 Day(s)
-
You can add up to 6 items per a category to the compare list.
VERTEX
From: 57,775,558 VND Days to Ship: Số ngày giao hàng: 63 Day(s)
63 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 6,644,450 VND Days to Ship: Số ngày giao hàng: 63 Day(s)
63 Day(s)
-
You can add up to 6 items per a category to the compare list.
Precision Self-Centering vise EA525AJ
ESCO
【Product Specifications】・360°-swivel base (with a scale)・Cast iron・Jaw width-100mm・Opening-103mm・Weight-14.4kg
From: 27,458,228 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】・Accuracy-±0.005mm ・Alloy steel・Accessory-Inserting pin： 1 pc・The jaw can be slid and fixed with a hex wrench only without re-insertion of the pin.・Jaw width…36mm・Opening…40mm・Weight…1.0kg
From: 5,213,278 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】・Jaw width-74mm ・Opening-75mm ・Weight-5kg・Accuracy- ±0.005mm ・Alloy steel
From: 20,699,215 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VERTEX
[Features] ・It has the same properties with the VH type and uses the same rotating platform ・It maintains high work stability as it is fixed with 2 locking screws ・Each setting range is 0 to 50 degree and can be check easily with gradations ・360 degree rotator that can be fixed anywhere ・3-Step Clamp Position like the VH type (Jaw Opening Capability) ・Precision with the error range of 0.02 mm ・2-year Warranty Period for the Hydraulic Oil Type System
From: 40,934,012 VND Days to Ship: Số ngày giao hàng: 63 Day(s)
63 Day(s)
-
You can add up to 6 items per a category to the compare list.
BLUETEC
【Features】·It is used by being mounted in large vise for processing of small and exquisite works·Material: SK-2#·Hardness: HRC58º-62·Precision Error Range: 0.005mm
From: 4,514,095 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Block for Vises - Stepped Model【2 Pieces Per Package】
MISUMI
[Features]·Stepped parallel block is recommended when you are worried about cutting tool interference·Specify the height direction in 1 mm increments and freely adjust the gripping width of the workpiece·Raw material type that is safe even if tool interferes and hardening material type with little settling are available
Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 6,581,056 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Handle Joint for Loctite CV Precision Machine Vise
NABEYA
[Features]A component for Lock-Tight CV Precision Machine Vises.A handle joint.· RoHS compliant·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm·Compatible models: Common to all CV models
From: 1,021,958 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Loctite Precision Machine Vise L Type
NABEYA
The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.
From: 26,549,864 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NABEYA
A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.
From: 177,264,016 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NABEYA
[Features]· The height is designed with the jaw depth of the vise in mind.· A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).· A 2-piece set.
From: 3,631,246 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NABEYA
[Features]· The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.· S50C type hardened to HRC46-53 with improved wear resistance.· Comes inside a strong wooden storage case.· Also sold separately.· By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating
From: 13,466,438 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Loctite MC Precision Machine Vise
NABEYA
When using in parallel, multiple units can be installed as it has no flange. The parallel accuracy of the parallel specification is within 0.01. Can also be used while turned sideways.
From: 42,478,248 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 1,050,285 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· High precision machining can be performed in a speedy manner.· Both vertical and horizontal aspects can be used, since the product is precision polished on four sides.· Excellent squareness and parallelism enable super-precise processing.[Applications]· It is secured to an electromagnetic chuck and used in precision machining.
From: 8,179,403 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Milling Vise with Rotating Base
TRUSCO NAKAYAMA
[Features]· Durable and tough design for each part.· The upper vise section can be rotated sideways 360°.· Attaches to milling machines and is mainly used for rough machining.
From: 8,695,771 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Precision Stainless Steel Vise DN30-1/30-2
JAPAN AUTOMATIC MACHINE
Handle opening/closing small vise which can be used for a wide range of cutting, grinding, and tapping using NCs/MCs that require high precision. * DN30-2 is a detachable handle type.
From: 32,832,104 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.         | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | NABEYA | NABEYA | VERTEX | TRUSCO NAKAYAMA | NABEYA | MISUMI | TRUSCO NAKAYAMA | KYORITSU SEIKI | ESCO | SAKAESEIKI | SAKAESEIKI | SAKAESEIKI | BLUETEC | ESCO | NABEYA | TRUSCO NAKAYAMA | VERTEX | VERTEX | SUPER TOOL | SUPER TOOL | ESCO | ESCO | MISUMI | NABEYA | VERTEX | VERTEX | VERTEX | ESCO | ESCO | ESCO | VERTEX | BLUETEC | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | JAPAN AUTOMATIC MACHINE |
| Product SeriesDòng sản phẩm | Parallel Block for Vises - Plain Model【2 Pieces Per Package】 | Precision Vise (Wrench Tightening Type) Quick Shift/Lift Prevention Structure Type | Parallel Block for Vises - Stepped Model【2 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||||||
| From | 36,363,808 VND | 34,217,600 VND | 6,257,772 VND | 1,833,145 VND | 36,151,353 VND | 7,549,205 VND | 85,529,514 VND | 5,966,280 VND | 16,318,368 VND | 19,051,480 VND | 48,055,928 VND | 1,588,290 VND | 12,030,216 VND | 999,335 VND | 8,107,650 VND | 23,841,860 VND | 6,159,824 VND | 5,317,846 VND | 43,409,285 VND | 3,541,741 VND | 2,567,864 VND | 23,710,610 VND | 51,964,864 VND | 57,775,558 VND | 6,644,450 VND | 27,458,228 VND | 5,213,278 VND | 20,699,215 VND | 40,934,012 VND | 4,514,095 VND | 6,581,056 VND | 1,021,958 VND | 26,549,864 VND | 177,264,016 VND | 3,631,246 VND | 13,466,438 VND | 42,478,248 VND | 1,050,285 VND | 8,179,403 VND | 8,695,771 VND | 32,832,104 VND | ||||
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) | Same day or more | 7 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) | 4 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 63 Day(s) | 63 Day(s) | 63 Day(s) | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 63 Day(s) | 6 Day(s) | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy