Centering/Countersink

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Center Drill

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Vanadium High Speed Steel	-	120˚	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	NA	Non-Coated	-

  From: 133,536 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish

  NOGA JAPAN

  [Features]· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.· Recommended for steel, cast items, non-ferrous metals, and light metals.· More effective at relatively slow cutting speeds (10 to 20 m/min).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6.3 ～ 31	90	-	Stainless Steel[○]	Single blade	-	-	-	-

  From: 611,296 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available / NA	TiN / Non-Coated	-

  From: 215,820 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90°

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 190,953 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counterbore

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.2 ～ 21	-	Hole Chamfer / Chamfering/Horizontal	general steel[○]	-	-	NA	-	-

  From: 489,643 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Center Drill Long Series

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-vanadium High Speed Steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	NA	Non-Coated	-

  From: 327,786 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ILIX カウンターシンク用ハンドル

  ILIX

  【特長】・手作業用のイリックスカウンターシンク専用ハンドルです。【用途】・手作業用【商品仕様】・内径(mm)：10.0・JANコード：4526587140251・トラスココード：523-2414・質量：60g

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	-	-	-	-

  From: 585,417 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 620,147 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiN	-

  From: 264,958 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, Carbide 90°

  OKABE

  Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 6	90	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Double-edged	NA	NA	Non-Coated	-

  From: 38,704 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Long Center Drill 90°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 5	90	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	Non-Coated	-

  From: 38,704 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink / Three-Flute Type

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 50	-	Hole Chamfer / Chamfering/Horizontal	general steel[○]	-	-	Available	TiCN	-

  From: 1,050,445 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, No Coating 90°

  ILIX

  Features●Less likely to generate secondary burrs and durable, that makes efficient work possible.●Can be used both in machine work and manual work.Usage●Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum AlloySpecification●3 Blades●Tip Angle: 90°●No CoatingMaterials●High Speed Steel（HSS）

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	NA	Non-Coated	-

  From: 697,961 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: 289,758 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 90°, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Counter Sink Hole & 90˚-SKH59 : CS03H9 Series

  DYC

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 50	-	-	-	-	-	Available / NA	TiCN / TiN / Non-Coated	-

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Counterbore Straight Shank-SKH51

  DYC

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.5 ～ 31	-	-	-	-	-	Available / NA	TiN / Non-Coated	-

  From: 577,843 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill A Type 60°

  MAGAFOR

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	60˚	Hole Chamfer / V Groove	general steel[○] / Aluminum[○]	-	-	Available	HSS	-

  From: 584,144 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 563,011 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  TiAlN coated type of the popular center drill

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiAlN	-

  From: 347,816 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° F723

  GUHRING

  Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	5 ～ 20	90	Centering (Positioning) / Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	Other	-

  From: 1,912,493 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: 864,744 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long

  MISUMI

  Carbide center drill that's ideal for centering in mass production drilling

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 5	-	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Double-edged	NA	Available	TiAlN	-

  From: 1,150,419 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Center Drill, Long / New JIS, Model A

  MISUMI

  [Features]·Necessary items for positioning processing·Non-coated high-speed steel double-edged 2-flute tip angle 120° (New JIS A type)·Effective for positioning processing in deep places

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 5	-	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	-	-

  From: 370,941 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 120°

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.9 ～ 25	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 173,025 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Center Drill, A Type, 60°, TiCN Coating

  IWATA TOOL

  [Features]· A center drill with high sharpness and outstanding durability.· Iwata Tool's center drills never stop evolving.· In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 5	60	Centering (Positioning)	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiCN	-

  From: 420,523 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.· Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.[Applications]· Work materials: Iron, casting, stainless steel.· Chamfering.· Deburring.· For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	Available	TiN	-

  From: 660,641 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, G Coating 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 10	60	Centering (Positioning)	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiN	-

  From: 38,704 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Starting Drills for Chamfering (90°), Coated_NC-SD-V

  YAMAWA MFG

  A drill for chamfering the end face after drilling with a drill.[Features]· Adopts cobalt high-speed steel with excellent wear resistance.[Applications]· By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90°	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: 446,341 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°, Coated_PE-Q-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 20	125°	Centering (Positioning) / Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Double-edged	NA	Available	TiCN	-

  From: 759,558 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°_CE-S

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60°	Centering (Positioning) / Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	NA	NA	-	-

  From: 113,023 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Point Drills 90°, Coated_C-PE-Q-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	125°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiAlN	-

  From: 2,063,163 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill A Type 60°

  DYC

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	-	-	-	Available / NA	TiAlN	-

  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Spot Drill

  MISUMI

  The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 2	-	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	NA	-	-

  From: 1,306,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set

  MISUMI

  Frequently used standard sizes are offered in a set at an affordable price

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3/8.3/10.4/12.4/16.5/20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 2,801,919 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Centering Tool, Long Type

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Long

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	12 ～ 50	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: 5,551,229 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 60° TiCN Coating

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: 289,758 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit, A Type 90°

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	90	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,289,496 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.· Finest surface finish without any chatter marks.[Applications]· Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: 694,616 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, JIS Type 1 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.7 ～ 6	60	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	Non-Coated	-

  From: 252,391 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 60°, Coated_PE-S-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 20	125°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiCN	-

  From: 703,469 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Countersinks 90°and 60°, Drilling Machine Use_CS-QM

  YAMAWA MFG

  Countersink that can perform chamfering of round holes, mounting surfaces of small screws and bolts, and grooves.[Features]· It has multiple flutes and is ideal for use with drilling machines.· Angles are available in 90° and 60°.[Applications]· Capable of highly precise and stable chamfering of round holes and mounting surfaces of small screws and bolts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 12	60 ～ 90	Hole Chamfer	-	Single blade	NA	NA	-	-

  From: 287,808 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V

  YAMAWA MFG

  [Features]·Coating with excellent abrasion resistance and chip-adhesion-resistance[Applications]·Center Hole Drilling・ Chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: 1,450,216 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 90°, Coated_CE-Q-V

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: 574,545 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Helix Center Drills-Type A 90°, Coated_CD-Q-V

  YAMAWA MFG

  For drilling 90° center holes, it is a weak helix groove A-type center hole drill that can process positioning and chamfering at the same time, and has a coating with excellent wear and adhesion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: 770,643 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YG 1	NOGA JAPAN	MISUMI	IWATA TOOL	YG 1	YG 1	ILIX	MISUMI	MISUMI	OKABE	OKABE	YG 1	ILIX	IWATA TOOL	IWATA TOOL	DYC	DYC	MAGAFOR	IWATA TOOL	MISUMI	GUHRING	MISUMI	MISUMI	MISUMI	IWATA TOOL	IWATA TOOL	TRUSCO NAKAYAMA	OKABE	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	DYC	MISUMI	MISUMI	EIKOSHA	IWATA TOOL	IWATA TOOL	TRUSCO NAKAYAMA	OKABE	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	H.S.S Center Drill	Cobalt high-speed steel counter sink (Co5), 3-fluted, 90°, CBN polish	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	HSS, SP Center, 90°	Counterbore	H.S.S Center Drill Long Series	ILIX カウンターシンク用ハンドル	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	TiN-Coated High-Speed Steel Center Drill, Regular Model	Center Drill, Okabe Standard, Type 1, Carbide 90°	Center Drill, Okabe Standard, Long Center Drill 90°	Counter Sink / Three-Flute Type	Straight Shank, Countersink, HSS, No Coating 90°	HSS, SP Center, 90° TiCN Coating	Carbide SP Center, 90°, ALD Coating	H.S.S Counter Sink Hole & 90˚-SKH59 : CS03H9 Series	H.S.S Counterbore Straight Shank-SKH51	Center Drill A Type 60°	Carbide SP Center 90°	TiAlN Coated High-Speed Steel Center Drill, Regular Model	NC Spotting Drill 90° F723	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack	TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long	High-Speed Steel Center Drill, Long / New JIS, Model A	HSS SP Center 120°	HSS Center Drill, A Type, 60°, TiCN Coating	Counter Sink (Titanium Coating)【1-6 Pieces Per Package】	Center Drill, Okabe Standard, Type 1, G Coating 60°	NC Starting Drills for Chamfering (90°), Coated_NC-SD-V	Point Drills 90°, Coated_PE-Q-V	High Helix Center Drills-Type A 60°_CE-S	Carbide Point Drills 90°, Coated_C-PE-Q-V	Carbide Center Drill A Type 60°	Carbide NC Spot Drill	TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set	Carbide Centering Tool, Long Type	HSS, SP Center, 60° TiCN Coating	Carbide HG Center Drill Bit, A Type 90°	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	Center Drill, Okabe Standard, JIS Type 1 60°	Point Drills 60°, Coated_PE-S-V	Countersinks 90°and 60°, Drilling Machine Use_CS-QM	Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V	High Helix Center Drills-Type A 90°, Coated_CE-Q-V	Low Helix Center Drills-Type A 90°, Coated_CD-Q-V
CADCAD			2D / 3D					2D / 3D	2D / 3D											2D / 3D		2D / 3D	2D / 3D	2D / 3D										2D / 3D
From	133,536 VND	611,296 VND	215,820 VND	190,953 VND	489,643 VND	327,786 VND	585,417 VND	620,147 VND	264,958 VND	38,704 VND	38,704 VND	1,050,445 VND	697,961 VND	289,758 VND	739,665 VND		577,843 VND	584,144 VND	563,011 VND	347,816 VND	1,912,493 VND	864,744 VND	1,150,419 VND	370,941 VND	173,025 VND	420,523 VND	660,641 VND	38,704 VND	446,341 VND	759,558 VND	113,023 VND	2,063,163 VND		1,306,240 VND	2,801,919 VND	5,551,229 VND	289,758 VND	1,289,496 VND	694,616 VND	252,391 VND	703,469 VND	287,808 VND	1,450,216 VND	574,545 VND	770,643 VND
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	5 Day(s) or more	9 Day(s)	Same day or more	4 Day(s) or more	7 Day(s) or more	5 Day(s) or more	4 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	9 Day(s) or more	Same day or more	5 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	Same day	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	Same day or more	8 Day(s) or more
Tool Material Type	Vanadium High Speed Steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-vanadium High Speed Steel	-	High-speed steel	High-speed steel	Carbide	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Cobalt HSS	High-speed steel	-	Carbide	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	Carbide	High-speed steel	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel
Tool Diameter (D)(mm)	-	6.3 ～ 31	2 ～ 20	0.3 ～ 9	3.2 ～ 21	-	-	6.3 ～ 20.5	1 ～ 4	0.3 ～ 6	1 ～ 5	10 ～ 50	6.3 ～ 37	0.3 ～ 9	0.1 ～ 6	10 ～ 50	6.5 ～ 31	-	0.03 ～ 6	1 ～ 4	5 ～ 20	2 ～ 12	0.5 ～ 5	1 ～ 5	0.9 ～ 25	1 ～ 5	-	0.3 ～ 10	3 ～ 25	3 ～ 20	3 ～ 25	3 ～ 16	-	0.3 ～ 2	6.3/8.3/10.4/12.4/16.5/20.5	12 ～ 50	0.3 ～ 9	0.2 ～ 3	-	0.7 ～ 6	3 ～ 20	6 ～ 12	4 ～ 12	4 ～ 18	4 ～ 18
Tip angle (θ)	120˚	90	90 ～ 120	90	-	-	-	-	-	90	90	-	90	90	90	-	-	60˚	90	-	90	90 ～ 120	-	-	120	60	90	60	90°	125°	60°	125°	-	-	-	90 ～ 118	60	90	90	60	125°	60 ～ 90	90°	90°	90°
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	Hole Chamfer	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	-	Hole Chamfer / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	-	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Stainless Steel[○]	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[○]	general steel[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	general steel[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○]	-	-	-	-	-
Single blade, two blades	-	Single blade	Single blade	Single blade / Double-edged	-	-	-	Single blade	Double-edged	Double-edged	Double-edged	-	Single blade	Single blade / Double-edged	Single blade / Double-edged	-	-	-	Single blade / Double-edged	Double-edged	Single blade	Single blade	Double-edged	Double-edged	Single blade / Double-edged	Double-edged	Single blade	Double-edged	Single blade	Double-edged	Double-edged	Double-edged	-	Single blade	Single blade	-	Single blade / Double-edged	Single blade	Single blade	Double-edged	Double-edged	Single blade	Double-edged	Double-edged	Double-edged
Peripheral Blade Y/N	-	-	NA	NA	-	-	-	NA	NA	NA	NA	-	Available	NA	NA	-	-	-	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	NA	-	Available / NA	NA	NA	NA	-	Available	Available	NA	NA	Available	NA	Available	Available	Available / NA	Available / NA	Available	NA	Available	Available	Available	Available	NA	NA	Available	Available	Available	Available	Available	NA	Available	Available / NA	NA	Available	-	Available	NA	Available	NA	Available	NA	Available	Available	Available
Coating Type	Non-Coated	-	TiN / Non-Coated	-	-	Non-Coated	-	TiN	TiN	Non-Coated	Non-Coated	TiCN	Non-Coated	TiCN	Other	TiCN / TiN / Non-Coated	TiN / Non-Coated	HSS	-	TiAlN	Other	TiAlN	TiAlN	-	-	TiCN	TiN	TiN	TiN	TiCN	-	TiAlN	TiAlN	-	TiN	-	TiCN	-	TiN	Non-Coated	TiCN	-	TiN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…