Turning Inserts

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip (Square Groove Grooving Tip TGA Type) TGAR

  SUMITOMO ELECTRIC HARDMETAL

  An insert for cutting tools.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Grooving / Parting	-	-	-	0.2 ～ Other	Right-hand	-	-	-	-	-

  From: 369,540 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insertSquare-shaped insertNegative insertFor machining general steelFor semi-finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  S (Rectangular)	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	4	Finish / Medium grinding	Negative	0.4 ～ Other	No-hand	-	-	-	-	-

  From: 168,704 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Cutting Insert PR1535 PVD Coating

  KYOCERA

  [Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.[Applications]· For Cutting Off· PR1535: Stainless steel cutoff machining (foremost recommended material)

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 455,995 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Blade Insert T (Triangle) TBGT-L-FX

  SUMITOMO ELECTRIC HARDMETAL

  A triangle-shaped insert.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	Finish	Pozidriv	0.2 ～ 0.4	Left-hand	-	-	-	-	-

  From: 289,411 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Blade Insert T (Triangle) TNGG-R-FX

  SUMITOMO ELECTRIC HARDMETAL

  A triangle-shaped insert.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	Finish	Negative	0.2 ～ 0.4	Right-hand	-	-	-	-	-

  From: 206,752 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Turning Insert PV720 PVD Cermet (TNGG/TNMG)

  KYOCERA

  [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	Finish / Medium grinding / Light Cutting	-	-	-	-	-	-	-	-

  From: 237,637 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Insert CCMT【10 Pieces Per Package】

  WIDIA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	-	Pozidriv	-	-	-	-	-	-	-

  From: 1,875,591 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert (For Cut-Off)

  SUMITOMO ELECTRIC HARDMETAL

  An insert for cutting tools.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Grooving / Parting	-	-	-	-	Right-hand / Left-hand / No-hand	-	-	-	-	-

  From: 224,063 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip

  KYOCERA

  When machining can be performed at many pitches with a single insert, use the TT type.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Threading	-	-	-	Other	Right-hand	-	-	-	-	-

  From: 538,618 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throwaway Tip (TC11)

  BIG DAISHOWA SEIKI

  For EWN boring heads. Specially designed throw-away insert ideal for boring.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle) / Other	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	-	-	0.1 ～ 0.8	-	-	-	-	-	-

  From: 101,640 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Triangle Positive with Hole TPGH "Finishing"

  KYOCERA

  [Specifications]· Shape: T (Triangle)· Number of Available Corners: 3· Rake Angle: Positive[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	3	Finish	Pozidriv	0.2 ～ Other	Right-hand / Left-hand	-	-	-	-	-

  From: 202,621 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Insert For Turning (Triangular Shaped 60°)【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insertTriangular-shaped insertNegative insertFor machining general steel and low-carbon steelFor finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	3	Finish / Medium grinding / Rough cutting	Negative	0.2 ～ Other	Right-hand / No-hand	-	-	-	-	-

  From: 220,133 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG-PF/PM/PR/QM/WF/WMX

  SANDVIK

  [Features]· Coated carbide tip.· Negative Insert· Wiper Tip[Applications]· For General Steel Processing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 495,417 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bar For Inner Diameter Machining, SBFB-F

  NGK SPARK PLUG

  [Features]· Chips are evacuated to the front

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	-	-	Other	-	-	-	-	-	-

  From: 1,108,160 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Turning Insert (DCMT)

  LAMINA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	-	Outer Diameter/Inner Diameter	2	-	Pozidriv	0.4 ～ 0.8	-	-	-	-	-	-

  From: 213,176 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Throwaway Tip (WC02)

  BIG DAISHOWA SEIKI

  [Features]Dedicated designed throw-away insert that is ideal for boring.An insert for all types of steel, low carbon steel, hardening copper, aluminum, cast iron, and ductile machining.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  W (Hexagonal Type)	Steel / Cast Iron / Non-ferrous metal / High Hardness Material	-	-	-	-	0.2	-	-	-	-	-	-

  From: 366,291 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Turning Insert (VCMT)

  LAMINA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  V (35° Diamond-Shaped)	-	Outer Diameter/Inner Diameter	2	-	Pozidriv	0.4 ～ 0.8	-	-	-	-	-	-

  From: 348,341 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Triangle Negative

  KYOCERA

  TNGA/TNGN

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron / High Hardness Material	Outer Diameter/Inner Diameter	-	-	Negative	0.4 ～ 1.2	No-hand	-	-	-	-	-

  From: 113,703 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Thread Cutting Tip

  KYOCERA

  60° inner diameter threading insert with flat cutting blade.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Threading	3	-	Pozidriv	0.2 ～ Other	Right-hand	-	0.5–1.5 ～ 5	Internal Diameter	unified 60° / General Purpose 60° / Whitworth 55° / General Purpose 55° / Taper for Pipes 55° / For American Tube 60° / Trapezoid 30°	8 ～ 28

  From: 254,751 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Turning Insert (VBMT)

  LAMINA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  V (35° Diamond-Shaped)	-	Outer Diameter/Inner Diameter	2	-	Pozidriv	0.4 ～ 0.8	-	-	-	-	-	-

  From: 274,209 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Designated Insert for JCGSSR/L

  TUNGALOY

  Clamp-on system without offset for cutting off

  CAD ：

  2D / 3D

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Outer Diameter/Inner Diameter / Grooving / Parting / Other	2	-	Pozidriv	-	Right-hand / Left-hand / No-hand	2	-	-	-	-

  From: 210,883 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ISO Meter Thread Cutting Tip (ISO) Finishing Blade (Flat Drag)

  ISCAR

  ISCAR thread-cutting tool.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Threading	3	Finish	-	0.2 ～ Other	Right-hand	-	0.35 ～ 5	Outer Diameter / Internal Diameter	ISO Meter 60°	-

  From: 322,148 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Atobiki (small tool)

  KYOCERA

  ABS1/ABW1/ABW2/TKFB

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Other	-	-	-	Other	No-hand	-	-	-	-	-

  From: 414,094 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Thread Cutting Tip 16ER/L○○ISO

  KYOCERA

  Metric Thread (M) with Flat Blade 60°

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Threading	3	-	Pozidriv	Other	Right-hand / Left-hand	-	0.5 ～ 2.5	Outer Diameter	ISO Meter 60°	-

  From: 428,258 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For Cut-Off, CTP, With Breaker

  NGK SPARK PLUG

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Grooving / Parting	-	-	-	Other	Right-hand / Left-hand	-	-	-	-	-

  From: 724,091 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bar For Inner Diameter Machining, SBFS-S

  NGK SPARK PLUG

  [Features]· Chips are evacuated to the back

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	-	-	Other	-	-	-	-	-	-

  From: 906,961 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Tip (Negative) TNGG【10 Pieces Per Package】

  MISUMI

  Achieves the high finish surface roughness with the use of the cermet material

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel	Outer Diameter/Inner Diameter	6	Finish	Negative	0.4 ～ 0.8	Right-hand / Left-hand	-	-	-	-	-

  From: 1,854,703 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Blade Insert T (Triangle) TCGT-R-FX

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]・Breaker symbol: FX・Shape: T (triangle)・Groove・Hole: T (with hole)・Relief angle: Positive 7° (C)・Application (breaker): Finish cutting[Grade Features]・AC1030U has a high-quality cutting edge that suppresses welding and microchipping, achieving excellent machined surface quality・AC530U is the main grade for small lathe tools and can be widely applied from rough machining to finishing machining of small items Non-coated cermet grade・AC5015S has more than twice the wear resistance compared to conventional models, and is the first recommended grade for turning difficult-to-cut materials・AC5025S has improved fracture resistance by more than 1.5 times compared to conventional grades, making it a grade for interrupted machining and turning difficult-to-cut materials

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	Finish	Pozidriv	0.2 ～ Other	Right-hand	-	-	-	-	-

  From: 246,924 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Triangle-Shape With Hole, Negative, TNMG-GU, For Medium Cutting

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ A general-purpose chip breaker that has low resistance and is resistant to wear.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	-	Medium grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 143,211 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tip for C-Cutter

  BIG DAISHOWA SEIKI

  A long insert with a parallelogram shape ideal for chamfering is used. [Work Material]Steel, cast iron, aluminum.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Steel / Cast Iron	-	-	-	-	-	-	-	-	-	-	-

  From: 480,810 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Insert for Turning, Coating CBN KBN25M

  KYOCERA

  [Features]· KBN25M: Fine particle CBN and heat-resistant bonded phase with heat-resistant MEGACOAT.· Stable machining of high-hardness alloy steel in general-purpose region.[Applications]· For lathe turning· KBN25M: Stable machining of high-hardness alloy steel in general-purpose regions

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 1,704,378 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107 Insert for turning, Round, Lathe Positive Tip H13A, RCMT05/08/12

  SANDVIK

  [Features]· Carbide tip for machining outer diameter of small objects and parts· Round Tip· Positive tips[Applications]· For machining cast iron and heat-resistant alloys· For Medium Machining

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	-	-	-	No-hand	-	-	-	-	-

  From: 221,328 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Turning Insert (CCMT)

  LAMINA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	-	Outer Diameter/Inner Diameter	2	-	Pozidriv	0.4 ～ 1.2	-	-	-	-	-	-

  From: 187,403 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Turning Insert (DNMG)

  LAMINA

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	-	Outer Diameter/Inner Diameter	2	-	Negative	0.4 ～ 1.2	-	-	-	-	-	-

  From: 221,192 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip T (Triangle) TPGN

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Chip Breaker Symbol: None· Shape: T (Triangle)· Groove·Holes: N (No hole)·Relief angle: Positive 11° (P) [Grade Features]·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Outer Diameter/Inner Diameter	-	-	Pozidriv	0.2 ～ 1.2	-	-	-	-	-	-

  From: 187,066 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumi Diamond Chip D (55° Rhombus) NF-DNMX

  SUMITOMO ELECTRIC HARDMETAL

  Diamond sintered insert for cutting tools developed with unique technology.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	Non-ferrous metal	Outer Diameter/Inner Diameter	-	-	Negative	0.2 ～ 1.2	-	-	-	-	-	-

  From: 1,747,656 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Threading Tool Holder KTT Type, Compatible Chip

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Threading	-	-	-	0.2 ～ Other	Right-hand / Left-hand	-	-	-	-	-

  From: 538,618 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Shape 35° / Positive With Hole VBGT

  KYOCERA

  [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  V (35° Diamond-Shaped)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Pozidriv	0.2 ～ Other	Right-hand / Left-hand	-	-	-	-	-

  From: 243,538 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Triangle Negative, CBN Diamond TNGA

  KYOCERA

  [Specifications]· Shape: T (Triangle)· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron / High Hardness Material	Outer Diameter/Inner Diameter	2 / 3	-	Negative	0.2 ～ Other	No-hand	-	-	-	-	-

  From: 1,622,739 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Lathe, CBN Diamond, Positive CCMT

  KYOCERA

  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 1· Rake Angle: Positive· Handedness: No handedness[Applications]· For Outer Diameter / Inner Diameter

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Non-ferrous metal / Heat-resistant alloy, titanium alloy	Outer Diameter/Inner Diameter	1	-	Pozidriv	0.2 ～ Other	No-hand	-	-	-	-	-

  From: 772,321 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Thread Cutting Tip 16IR/L○○ISO

  KYOCERA

  Metric Thread (M) with Flat Blade 60°

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Threading	3	-	Pozidriv	Other	Right-hand / Left-hand	-	1 ～ 3	Internal Diameter	ISO Meter 60°	-

  From: 428,258 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-MaxP Insert X-Line CNMG

  SANDVIK

  [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 80° insert· Negative insert

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Outer Diameter/Inner Diameter	4	Finish / Medium grinding / Medium to deep grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 287,065 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Turning Insert CA510 CVD Coating

  KYOCERA

  [Features]· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.· Supports both high-speed and high-feed machining.[Applications]· For lathe turning· CA510: High-speed/high-efficiency steel machining

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  -	-	-	-	Finish	-	-	-	-	-	-	-	-

  From: 327,144 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For Thread Milling, TTP-FR-A

  NGK SPARK PLUG

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Threading	-	-	-	Other	Right-hand	-	0.2 to 0.75 ～ 0.4 to 1.25	-	-	-

  From: 881,065 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip T (Triangle) TPGW

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Chip Breaker Symbol: None· Shape: T (Triangle)· Groove·Holes: W (With holes)·Relief angle: Positive 11° (P) [Grade Features]·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed·and high-precision machining of high grade cast iron such as ductile cast iron in particular.·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed·and high-precision machining of high grade cast iron such as ductile cast iron in particular.·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Outer Diameter/Inner Diameter	-	-	Pozidriv	0.2 ～ 0.8	-	-	-	-	-	-

  From: 176,710 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Shape
work material
Application
Available corners
Breaker Use
Rake angle
Nose R
Selfishly
Groove Width (For Grooving / Plunging)
Pitch (for Threading)
O.D./ I.D. (For Threading)
Screw Types (for threading)
Number of threads (for threading)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	WIDIA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	BIG DAISHOWA SEIKI	KYOCERA	SANDVIK	SANDVIK	NGK SPARK PLUG	LAMINA	BIG DAISHOWA SEIKI	LAMINA	KYOCERA	KYOCERA	LAMINA	TUNGALOY	ISCAR	KYOCERA	KYOCERA	NGK SPARK PLUG	NGK SPARK PLUG	MISUMI	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	KYOCERA	SANDVIK	LAMINA	LAMINA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	Tip (Square Groove Grooving Tip TGA Type) TGAR	T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM【1-10 Pieces Per Package】	Kyocera Cutting Insert PR1535 PVD Coating	Replacement Blade Insert T (Triangle) TBGT-L-FX	Replacement Blade Insert T (Triangle) TNGG-R-FX	Kyocera Turning Insert PV720 PVD Cermet (TNGG/TNMG)	Carbide Insert CCMT【10 Pieces Per Package】	Insert (For Cut-Off)	S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip	Throwaway Tip (TC11)	60° Triangle Positive with Hole TPGH "Finishing"	T-Max P Negative Insert For Turning (Triangular Shaped 60°)【1-10 Pieces Per Package】	T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG-PF/PM/PR/QM/WF/WMX	Boring Bar For Inner Diameter Machining, SBFB-F	Turning Insert (DCMT)	Throwaway Tip (WC02)	Turning Insert (VCMT)	60° Triangle Negative	Inner Diameter Thread Cutting Tip	Turning Insert (VBMT)	Designated Insert for JCGSSR/L	ISO Meter Thread Cutting Tip (ISO) Finishing Blade (Flat Drag)	For Atobiki (small tool)	Outer Diameter Thread Cutting Tip 16ER/L○○ISO	Insert For Cut-Off, CTP, With Breaker	Boring Bar For Inner Diameter Machining, SBFS-S	Lathe Tip (Negative) TNGG【10 Pieces Per Package】	Replacement Blade Insert T (Triangle) TCGT-R-FX	Triangle-Shape With Hole, Negative, TNMG-GU, For Medium Cutting	Carbide Tip for C-Cutter	Kyocera Insert for Turning, Coating CBN KBN25M	CoroTurn 107 Insert for turning, Round, Lathe Positive Tip H13A, RCMT05/08/12	Turning Insert (CCMT)	Turning Insert (DNMG)	Blade Tip Replacement Tip T (Triangle) TPGN	Sumi Diamond Chip D (55° Rhombus) NF-DNMX	Outer Diameter Threading Tool Holder KTT Type, Compatible Chip	Diamond Shape 35° / Positive With Hole VBGT	60° Triangle Negative, CBN Diamond TNGA	Tip for Lathe, CBN Diamond, Positive CCMT	Inner Diameter Thread Cutting Tip 16IR/L○○ISO	T-MaxP Insert X-Line CNMG	Kyocera Turning Insert CA510 CVD Coating	Insert For Thread Milling, TTP-FR-A	Blade Tip Replacement Tip T (Triangle) TPGW
CADCAD																					2D / 3D
From	369,540 VND	168,704 VND	455,995 VND	289,411 VND	206,752 VND	237,637 VND	1,875,591 VND	224,063 VND	538,618 VND	101,640 VND	202,621 VND	220,133 VND	495,417 VND	1,108,160 VND	213,176 VND	366,291 VND	348,341 VND	113,703 VND	254,751 VND	274,209 VND	210,883 VND	322,148 VND	414,094 VND	428,258 VND	724,091 VND	906,961 VND	1,854,703 VND	246,924 VND	143,211 VND	480,810 VND	1,704,378 VND	221,328 VND	187,403 VND	221,192 VND	187,066 VND	1,747,656 VND	538,618 VND	243,538 VND	1,622,739 VND	772,321 VND	428,258 VND	287,065 VND	327,144 VND	881,065 VND	176,710 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	12 Day(s)	7 Day(s) or more	4 Day(s)	9 Day(s)	4 Day(s)	6 Day(s) or more	6 Day(s) or more	4 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s)	4 Day(s)	4 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more
Shape	T (Triangle)	S (Rectangular)	-	T (Triangle)	T (Triangle)	-	C (80° Diamond-Shape)	Other	T (Triangle)	T (Triangle) / Other	T (Triangle)	T (Triangle)	-	-	D (55° Diamond-Shape)	W (Hexagonal Type)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	Other	T (Triangle)	Other	T (Triangle)	C (80° Diamond-Shape)	-	T (Triangle)	T (Triangle)	T (Triangle)	Other	-	-	C (80° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	C (80° Diamond-Shape)	-	T (Triangle)	T (Triangle)
work material	Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	-	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	-	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	-	Steel / Cast Iron / Non-ferrous metal / High Hardness Material	-	Cast Iron / High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	-	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Cast Iron	-	-	-	-	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Non-ferrous metal	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Cast Iron / High Hardness Material	Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material
Application	Grooving / Parting	Outer Diameter/Inner Diameter	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	-	Grooving / Parting	Threading	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Threading	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter / Grooving / Parting / Other	Threading	Other	Threading	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	-	-	-	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Threading	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Threading	Outer Diameter/Inner Diameter	-	Threading	Outer Diameter/Inner Diameter
Available corners	-	4	-	-	-	-	-	-	-	-	3	3	-	-	2	-	2	-	3	2	2	3	-	3	-	-	6	-	-	-	-	-	2	2	-	-	-	2	2 / 3	1	3	4	-	-	-
Breaker Use	-	Finish / Medium grinding	-	Finish	Finish	Finish / Medium grinding / Light Cutting	-	-	-	-	Finish	Finish / Medium grinding / Rough cutting	-	-	-	-	-	-	-	-	-	Finish	-	-	-	-	Finish	Finish	Medium grinding	-	-	-	-	-	-	-	-	Finish / Medium grinding	-	-	-	Finish / Medium grinding / Medium to deep grinding	Finish	-	-
Rake angle	-	Negative	-	Pozidriv	Negative	-	Pozidriv	-	-	-	Pozidriv	Negative	-	-	Pozidriv	-	Pozidriv	Negative	Pozidriv	Pozidriv	Pozidriv	-	-	Pozidriv	-	-	Negative	Pozidriv	Negative	-	-	-	Pozidriv	Negative	Pozidriv	Negative	-	Pozidriv	Negative	Pozidriv	Pozidriv	Negative	-	-	Pozidriv
Nose R	0.2 ～ Other	0.4 ～ Other	-	0.2 ～ 0.4	0.2 ～ 0.4	-	-	-	Other	0.1 ～ 0.8	0.2 ～ Other	0.2 ～ Other	-	Other	0.4 ～ 0.8	0.2	0.4 ～ 0.8	0.4 ～ 1.2	0.2 ～ Other	0.4 ～ 0.8	-	0.2 ～ Other	Other	Other	Other	Other	0.4 ～ 0.8	0.2 ～ Other	0.4 ～ 1.6	-	-	-	0.4 ～ 1.2	0.4 ～ 1.2	0.2 ～ 1.2	0.2 ～ 1.2	0.2 ～ Other	0.2 ～ Other	0.2 ～ Other	0.2 ～ Other	Other	0.4 ～ 1.6	-	Other	0.2 ～ 0.8
Selfishly	Right-hand	No-hand	-	Left-hand	Right-hand	-	-	Right-hand / Left-hand / No-hand	Right-hand	-	Right-hand / Left-hand	Right-hand / No-hand	-	-	-	-	-	No-hand	Right-hand	-	Right-hand / Left-hand / No-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand	No-hand	-	-	No-hand	-	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	No-hand	-	Right-hand	-
Groove Width (For Grooving / Plunging)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pitch (for Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5–1.5 ～ 5	-	-	0.35 ～ 5	-	0.5 ～ 2.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 3	-	-	0.2 to 0.75 ～ 0.4 to 1.25	-
O.D./ I.D. (For Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Internal Diameter	-	-	Outer Diameter / Internal Diameter	-	Outer Diameter	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Internal Diameter	-	-	-	-
Screw Types (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	unified 60° / General Purpose 60° / Whitworth 55° / General Purpose 55° / Taper for Pipes 55° / For American Tube 60° / Trapezoid 30°	-	-	ISO Meter 60°	-	ISO Meter 60°	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	ISO Meter 60°	-	-	-	-
Number of threads (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	8 ～ 28	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…