(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more
Long Neck Ball End Mills (Carbide)
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
78 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.075 ～ 3 0.12 ～ 4.8 0.3 ～ 15 4 ～ 6 2 45 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] -0.005～0.005 ～ -0.002～0.002 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 630,486 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Supports high hardness materials up to 68 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.2 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] 0.005～-0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 607,275 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
[Features]・ Neck relief type suitable for narrow deep machining. Supports deep cutting precision 3D machining from low speed to high speed.・ Available in a total of 282 sizes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.3 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 589,345 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long-Neck Ball End Mill For Copper Electrodes DRB230
NS TOOL
[Features]· A long-neck ball end mill with an exceptionally long tool life, offering high quality when machining copper electrodes.・ A long neck ball end mill specializing in the processing of copper alloys.・ The sharp blade shape and DLC coating enable long-term, high-quality and stable machining.・ It is also effective for processing copper tungsten electrodes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.15 ～ 6 - 4 ～ 6 - 45 ～ 80 Copper[○] ±2 ～ ±3 Curved surface DLC Long-Neck Ball From: 1,369,182 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.2 ～ 60 4 ～ 6 2 50 ～ 110 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] ±0.005 Curved surface / Side / Engraving / R Groove MRC Long-Neck Ball From: 494,588 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coating, Long-Neck Ball End Mill DCRB230
NS TOOL
[Features]・ By adopting a unique diamond coating, it has high durability against machining of graphite and high silicone aluminum alloy.・ Neck relief type suitable for narrow and deep machining
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.3 ～ 6 1 ～ 60 4 ～ 6 2 45 ～ 120 Aluminum[○] / Resin[○] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 2,727,320 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.03 ～ 6 0.06 ～ 22 - 4 ～ 12 2 50 ～ 110 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] -0.007～0.007 ～ -0.002～0.002 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 513,634 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2HRB (HPRB)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_b$)
Rib Ball End Mill [2HRB (HPRB)]
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.05 ～ R6.0 0.1 ～ 12 0.3 ～ 40 4 ～ 12 2 45 ～ 110 - ±0.005 - TiSiN Long-Neck Ball From: 988,966 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
[Features]・ Three x flute length, 5 × D flute length, 10 × D flute length, super long neck, same diameter type, selectable according to the machining shape.・ Can also be used for non-ferrous materials such as aluminum and copper.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.6 ～ 30 2 ～ 80 3 ～ 6 2 50 ～ 130 Aluminum[◎] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / R Groove Non-Coated Long-Neck Ball From: 740,452 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
[Features]・ The lower neck is tapered to improve tool rigidity.・ It is possible to make a large cutting depth compared to conventional products.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 2 0.2 ～ 4 1 ～ 60 4 ～ 8 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / R Groove TiAlN Tapered neck ball From: 975,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2DPB (DPRB)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_b$)
Rib Ball End Mill [2DPB (DPRB)]
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.1 ～ R2.0 0.2 ～ 16 1 ～ 50 4 ～ 6 2 45 ～ 100 - ±0.005 - DIA Long-Neck Ball From: 1,336,041 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 2 0.16 ～ 50 1.5 ～ 62 4 ～ 6 2 4 ～ 120 general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] -0.005～0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) Tapered neck ball From: 1,074,285 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]·Long neck shape suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 8 0.2 ～ 60 3 ～ 8 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
- Volume Discount
- DIA
- Graphite
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.6 ～ 7.5 2 ～ 60 4 ～ 6 2 50 ～ 110 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] ±0.01 Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 1,942,389 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD
OSG
[Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece.・ Seamless shape that improves the quality of shape machining.・ An end mill with a diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 2 0.6 ～ 6 4 ～ 60 4 2 50 ～ 100 Aluminum[○] / Graphite[◎] / Resin[◎] -0.01～+0.01 ～ -0.008～+0.008 Curved surface / Side / Engraving / R Groove DG Long-Neck Ball From: 3,932,030 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.4 ～ 6 1 ～ 50 4 ～ 6 2 45 ～ 120 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 876,385 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 1 0.08 ～ 1.2 0.3 ～ 10 4 2 50 ～ 53 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] 0.005～-0.005 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 4,551,697 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.05 ～ R6 0.1 ～ 22 - 4 ～ 12 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.007～0.007 ～ -0.005～0.005 Curved surface / Side / Engraving / R Groove TiCN Ball From: 513,634 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
It supports deep cutting precision 3D machining. A neck relief type suitable for narrow and deep machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.4 ～ 3 0.6 ～ 6 6 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 1,544,125 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Ball End Mill (X5070S)
YG 1
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 2.5 ～ 22 - 6 ～ 12 2 50 ～ 110 Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] - Curved surface / Side / Engraving / R Groove BLUE Ball From: 1,456,957 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Ultra Long Ball End Mill 30° B246X
7 LEADERS
[Features]· 2-flute ultra-long shank ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Suitable for a wide range of work materials from general steel to high hardness steel.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 4 ～ 22 - 3 ～ 12 2 100 ～ 210 general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] ±10 Curved surface / Engraving / R Groove - Ball From: 1,398,282 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 5 - 4 ～ 55 6 ～ 10 2 70 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] ±0.01 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball / Spherical Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]·High stiffness 2-flute type with length taper shape·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.15 ～ 5 0.3 ～ 8 2 ～ 60 4 ～ 12 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Tapered neck ball From: 910,827 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]·High-feed, high stiffness 3-flute taper shape with taper length·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 0.8 ～ 6 7 ～ 60 4 ～ 8 3 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Tapered neck ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 0.8 ～ 4.8 3 ～ 50 4 ～ 6 2 ～ 3 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 3 1.6 ～ 6 4 ～ 30 4 ～ 6 4 50 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining·Taper neck is effective in suppressing chattering·Machining of high hardness steel up to 65HRC is possible·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 0.8 ～ 4.8 20 ～ 50 4 ～ 8 3 70 ～ 110 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Tapered neck ball From: 1,575,389 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices
- Volume Discount
- CrN
- Copper
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 2 0.4 ～ 4 2 ～ 40 4 ～ 6 2 50 ～ 110 Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] ±0.005 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 910,827 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 8 0.2 ～ 60 3 ～ 6 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 373,047 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck for Copper Work, Ball CURIBR
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 0.5 ～ 50 4 ～ 6 2 45 ～ 120 Aluminum[◎] / Copper[◎] -0.007～+0.003 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 1,072,515 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD
OSG
Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2.5 1.5 ～ 7.5 3 ～ 40 6 2 60 ～ 90 Aluminum[○] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 2,300,832 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB·Achieves deep cut milling even with small diameters. Good cutting quality.With the effect of spiral gash, both cutting edge strength and sharpness are achieved.·CBN sintered body is used for the flute material.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 1.5 0.3 ～ 1.8 2 ～ 15 4 ～ 6 2 45 ～ 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 4,049,865 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute CRN-LN-EBD-4
OSG
Ball end mill series with CrN coating with excellent lubricity. Ideal for fine machining of copper electrodes and IT parts.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 1 0.16 ～ 1.6 1 ～ 30 4 2 45 ～ 70 Aluminum[○] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 1,773,426 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute DLC-LN-EBD
OSG
Unique ultra-smooth DLC coating prevents welding. Achieves high speed in machining shapes such as aluminum alloys and provides a good finished surface.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2 1.5 ～ 6 5 ～ 20 6 2 60 ～ 80 Aluminum[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove DLC Long-Neck Ball From: 2,263,062 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating with excellent lubricity and abrasion resistance. Can be used with a wide range of work materials and cutting applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 1.5 0.5 ～ 2.4 1.5 ～ 12 4 2 35 ～ 40 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 628,133 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute FX-LN-EBD-6
OSG
Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.25 ～ 3 0.5 ～ 6 2.5 ～ 30 6 2 60 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 2,798,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 50 4 ～ 6 2 45 ～ 120 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 443,333 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 6 0.3 ～ 50 3 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 463,333 VND Days to Ship: Số ngày giao hàng: 30 Day(s) or more
30 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball end mill whose length of cut can be freely selected according to the machining application shape. High-toughness carbide base material realizes stable cutting in a wide range of machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.16 ～ 4.8 0.5 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 972,384 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 4-Flute for Graphite DG-LN-EBM
OSG
End mill with diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 1.5 3 ～ 4.5 10 ～ 20 4 4 50 ～ 60 Aluminum[◎] / Graphite[◎] / Resin[◎] -0.015～+0.015 Curved surface / Side / Engraving / R Groove DG Long-Neck Ball From: 3,932,030 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute DIA-LN-EBD
OSG
Long neck shaped ball end mill with ultra-microcrystalline diamond coating. Excellent durability in graphite machining. Also effective for copper and aluminum alloys.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2.5 1.5 ～ 7.5 5 ～ 50 6 2 60 ～ 100 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 5,718,638 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 0.75 0.3 ～ 2.5 - 4 2 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.005～0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 563,011 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1.5 ～ 6 4.5 ～ 25 - 3 ～ 12 2 80 ～ 200 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.007～0.007 ～ -0.005～0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 1,712,050 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.4 ～ 3 0.64 ～ 4.8 3 ～ 30 4 ～ 6 2 45 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.002～0.002 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 546,486 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
[Features]· Supports Shrink Fit Holders· Suppresses unnecessary tool protrusion to enable higher precision processing· Reduces processes in cutting· Increases machining efficiency through combination with shrink fit holder.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 3 ～ 18 - 4 ～ 12 4 40 ～ 60 High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.01～0.01 ～ -0.005～0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 958,811 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
![Rib Ball End Mill [2HRB (HPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_b$)
![Rib Ball End Mill [2DPB (DPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_b$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2HRB (HPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2DPB (DPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | MISUMI | NS TOOL | UNION TOOL | HANSONG M&T | NS TOOL | NS TOOL | HANSONG M&T | UNION TOOL | MISUMI | MISUMI | OSG | UNION TOOL | NS TOOL | UNION TOOL | NS TOOL | YG 1 | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL |
| Product SeriesDòng sản phẩm | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | |||||||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| From | 630,486 VND | 607,275 VND | 589,345 VND | 1,369,182 VND | 494,588 VND | 2,727,320 VND | 513,634 VND | 988,966 VND | 740,452 VND | 975,335 VND | 1,336,041 VND | 1,074,285 VND | 1,942,389 VND | 3,932,030 VND | 876,385 VND | 4,551,697 VND | 513,634 VND | 1,544,125 VND | 1,456,957 VND | 1,398,282 VND | 910,827 VND | 1,575,389 VND | 910,827 VND | 373,047 VND | 1,072,515 VND | 2,300,832 VND | 4,049,865 VND | 1,773,426 VND | 2,263,062 VND | 628,133 VND | 2,798,335 VND | 443,333 VND | 463,333 VND | 972,384 VND | 3,932,030 VND | 5,718,638 VND | 563,011 VND | 1,712,050 VND | 546,486 VND | 958,811 VND | |||||
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Quote | 30 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| R Size(mm) | 0.075 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.2 ～ 3 | 0.03 ～ 6 | R0.05 ～ R6.0 | 0.1 ～ 3 | 0.1 ～ 2 | R0.1 ～ R2.0 | 0.1 ～ 2 | 0.05 ～ 3 | 0.2 ～ 3 | 0.2 ～ 2 | 0.2 ～ 3 | 0.05 ～ 1 | R0.05 ～ R6 | 0.4 ～ 3 | 0.5 ～ 6 | 1 ～ 6 | 0.5 ～ 5 | 0.15 ～ 5 | 0.5 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.5 ～ 3 | 0.2 ～ 2 | 0.05 ～ 3 | 0.1 ～ 3 | 0.5 ～ 2.5 | 0.2 ～ 1.5 | 0.1 ～ 1 | 0.5 ～ 2 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 1 ～ 1.5 | 0.5 ～ 2.5 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 1 ～ 6 |
| Blade length (ℓ)(mm) | 0.12 ～ 4.8 | 0.07 ～ 6 | 0.07 ～ 6 | 0.15 ～ 6 | 0.07 ～ 6 | 0.3 ～ 6 | 0.06 ～ 22 | 0.1 ～ 12 | 0.6 ～ 30 | 0.2 ～ 4 | 0.2 ～ 16 | 0.16 ～ 50 | 0.07 ～ 8 | 0.6 ～ 7.5 | 0.6 ～ 6 | 0.4 ～ 6 | 0.08 ～ 1.2 | 0.1 ～ 22 | 0.6 ～ 6 | 2.5 ～ 22 | 4 ～ 22 | - | 0.3 ～ 8 | 0.8 ～ 6 | 0.8 ～ 4.8 | 1.6 ～ 6 | 0.8 ～ 4.8 | 0.4 ～ 4 | 0.07 ～ 8 | 0.2 ～ 6 | 1.5 ～ 7.5 | 0.3 ～ 1.8 | 0.16 ～ 1.6 | 1.5 ～ 6 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.08 ～ 4.8 | 0.08 ～ 6 | 0.16 ～ 4.8 | 3 ～ 4.5 | 1.5 ～ 7.5 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 3 ～ 18 |
| Underneck length (ℓ1)(mm) | 0.3 ～ 15 | 0.2 ～ 50 | 0.3 ～ 50 | - | 0.2 ～ 60 | 1 ～ 60 | - | 0.3 ～ 40 | 2 ～ 80 | 1 ～ 60 | 1 ～ 50 | 1.5 ～ 62 | 0.2 ～ 60 | 2 ～ 60 | 4 ～ 60 | 1 ～ 50 | 0.3 ～ 10 | - | 6 ～ 50 | - | - | 4 ～ 55 | 2 ～ 60 | 7 ～ 60 | 3 ～ 50 | 4 ～ 30 | 20 ～ 50 | 2 ～ 40 | 0.2 ～ 60 | 0.5 ～ 50 | 3 ～ 40 | 2 ～ 15 | 1 ～ 30 | 5 ～ 20 | 1.5 ～ 12 | 2.5 ～ 30 | 0.3 ～ 50 | 0.3 ～ 50 | 0.5 ～ 50 | 10 ～ 20 | 5 ～ 50 | - | - | 3 ～ 30 | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 3 ～ 6 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 3 ～ 8 | 4 ～ 6 | 4 | 4 ～ 6 | 4 | 4 ～ 12 | 4 ～ 6 | 6 ～ 12 | 3 ～ 12 | 6 ～ 10 | 4 ～ 12 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 8 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 6 | 4 ～ 6 | 4 | 6 | 4 | 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 | 6 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | - | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 ～ 3 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 4 |
| Overall Length (L)(mm) | 45 ～ 80 | 45 ～ 120 | 45 ～ 120 | 45 ～ 80 | 50 ～ 110 | 45 ～ 120 | 50 ～ 110 | 45 ～ 110 | 50 ～ 130 | 50 ～ 110 | 45 ～ 100 | 4 ～ 120 | 40 ～ 110 | 50 ～ 110 | 50 ～ 100 | 45 ～ 120 | 50 ～ 53 | 50 ～ 110 | 45 ～ 120 | 50 ～ 110 | 100 ～ 210 | 70 ～ 90 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 50 ～ 70 | 70 ～ 110 | 50 ～ 110 | 50 ～ 110 | 45 ～ 120 | 60 ～ 90 | 45 ～ 50 | 45 ～ 70 | 60 ～ 80 | 35 ～ 40 | 60 ～ 90 | 45 ～ 120 | 45 ～ 120 | 45 ～ 120 | 50 ～ 60 | 60 ～ 100 | 50 | 80 ～ 200 | 45 ～ 80 | 40 ～ 60 |
| work material | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | - | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | - | general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] |
| R Precision(μm) | -0.005～0.005 ～ -0.002～0.002 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | ±2 ～ ±3 | ±0.005 | 0.01～-0.01 | -0.007～0.007 ～ -0.002～0.002 | ±0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | ±0.005 | -0.005～0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | -0.01～+0.01 ～ -0.008～+0.008 | -0.01～0.01 | 0.005～-0.005 | -0.007～0.007 ～ -0.005～0.005 | 0.01～-0.01 | - | ±10 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 | - | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | Curved surface / R Groove | Curved surface / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | DLC | MRC | Dia Coat | For High Hardness (Silicon Group) | TiSiN | Non-Coated | TiAlN | DIA | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Dia Coat | DG | Non-Coated | Non-Coated | TiCN | Non-Coated | BLUE | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | For General Steels (AlCrN, etc.) | CrN | CrN | Non-Coated | CrN | DLC | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | DG | Dia Coat | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball / Spherical Ball | Tapered neck ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- 0.1
- R0.1
- R0.125
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.35
- R0.35
- 0.4
- R0.4
- 0.45
- R0.45
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- R1.0
- 1.25
- R1.25
- 1.5
- R1.5
- 1.75
- R1.75
- 2
- R2
- R2.0
- 2.25
- R2.25
- 2.5
- R2.5
- 2.75
- R2.75
- 3
- R3
- R3.0
- 3.25
- R3.25
- 3.5
- R3.5
- 3.75
- R3.75
- 4
- R4
- R4.0
- 4.25
- R4.25
- 4.5
- R4.5
- 4.75
- 5
- R5
- R5.0
- 5.25
- 5.5
- R5.5
- 5.75
- 6
- R6
- R6.0
- 8
- 10
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.7
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.3
- 5
- 5.2
- 5.3
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9～9.7
- 9
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.2
- 11
- 11.2
-
12～12.7
- 12
- 12.7
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16～16.5
- 16
- 16.5
-
18
-
20
-
22
-
24
-
25
-
30
-
35
-
38
-
40
-
45
-
50
-
55
-
60
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy