Can the conveyor's operating direction be set to reverse?

The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.

Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?

The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.

If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?

For this situation, please contact customer service for customization to meet your individual needs.

If I need a stepper motor or a servo motor, can you provide them?

You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(4 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-CVGTN-[80-300/10]-[365-2000/5]-6-[NM,SCM]-NH-[D,H,J,S]-[G,J,R]

Conveyance Length Belt Width/Belt Pitch B Output Power (W) Specifications Gear Head Reduction Ratio Belt Specifications Motor type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Conveyance Length
[365-2000/5]
ClearTrống
Belt Width/Belt Pitch B(mm)
[80-300/10mm Unit(s)]
ClearTrống
Output Power (W)
6

25
ClearTrống
Specifications
- INV (Three-phase 220 V Inverter Type)
- SCM (Single-phase 220 V Speed Control Type)
- NM (No Motor)
ClearTrống
Gear Head Reduction Ratio
- 5
- 12.5
- 25
- 90
- NH (Gearless Head)
ClearTrống
Belt Specifications
- Anti-static · Black Double-sided Fabric
- For Sliding · Green Double-sided Tape
- General Use · White Tooth Surface Cloth Tape
- No belt
ClearTrống
Motor
- G (Taibang Motor)
- J (Precision Motor)
- R (No Motor · Gear Head)
ClearTrống
type
- E-CVGTN
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

18 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 30mm

Name: Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 30mm
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Economy series Belt Conveyor

Product Overview

Economy series conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-CVGTN: Double-row synchronous belt conveyor, driven by a motor and synchronous belt, enabling synchronized rotation of two rows of synchronous belts. Suitable for pallet transfer and assembly into equipment.

Dimensional Drawing

Motor Specification: 6W^*

Support Component Notes:
When L < 1000, there are two sets of support components
When L is 1000 to 1500, there are three sets of support components
When L > 1500, there are four sets of support components

When L ≤ 700, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side in the aluminum profile slot;
When L > 700, a countersunk hole for nut insertion is reserved by default at position F, no additional processing is required.

When selecting a speed control motor, the speed controller is not installed on the main unit, and no mounting bracket is included.
If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.

Enlarged Profile View (Symmetrical Left and Right)
MISUMI belt conveyor manufacturer aluminum profile aluminium frame

Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)

L365 to 999	L1000 to 1499	L1500 or more	Position	Specifications	Configuration Type
4PCS	6PCS	8PCS	Section I (Left/Right)	M3 (Hexagon)	Accessories
4PCS	6PCS	8PCS	J Section (Left/Right)	M6 (Square)	Accessories

■ Details of A Dimension

Motor Power	Motor		Reduction Ratio	A
	Specifications	Manufacturer
6W	Variable Speed Motor	GPG	3 to 18	L107
			25 to 180	L117
		JSCC	3 to 18	L118
			25 to 180	L130
25W	Induction Motor / Variable Speed Motor	GPG	3 to 18	L118
			25 to 180	L130
	Induction Motor	JSCC	3 to 18	L119
			25 to 180	L130
	Variable Speed Motor		3 to 18	L129
			25 to 180	L140

Material Table

Part Name	Material	Surface Treatment
Frame	Aluminum	Electro Plating
Motor Cover Plate	Aluminum	Baked Paint
Pulley Housing	Aluminum	Baked Paint

Specifications Overview

■ Timing Belt Center Distance - Pulley Center Distance Correspondence Table

Part number	Timing Belt Center Distance B	Pulley Center Distance L
Part number	Timing Belt Center Distance B	L365 to 500	L505 to 600	L605 to 800	L805 to 905	L905 to 1000	L1005 to 2000
E-CVGTN	80 to 110	●	●	●	●	●	●
	120 to 160	●	●	●	●	●	●
	170 to 210	●	●	●	●	●	●
	220 to 260	●	●	●	●	●	●
	270 to 300	●	●	●	●	●	●

Alterations

Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection	-	Alterations

						Output Power	-	Specifications	-	Gear Head Reduction Ratio
E-CVGTN	-	120	-	1000	-	6	-	SCM	-	25	-	H	-	G	-	MP200

Alterations	Code	Spec
Drive Unit Position Specification	MP	The drive unit installation position can be changed. Ordering Code MP 170 ≤ MP ≤ L-330 *Minimum L value is 500 Only the center drive type can be specified.
Mounting Bracket for Speed Controller	SCB	Includes mounting bracket for speed controller. Ordering Code SCB

Specification Table

Please order after selecting part number and parameters according to the selection steps

	Part Number	-	B	-	L	-	Motor Selection					-	Belt Specifications	-	Motor Manufacturer Selection

							Output Power	-	Specifications	-	Gear Head Reduction Ratio
Without belt Without motor or gear head	E-CVGTN E-CVGTN E-CVGTN	- - -	120 120 120	- - -	1000 1000 1000	- - -	6 25 25	- - -	SCM SCM NM	- - -	25 30 NH	- - -	H J H	- - -	G G R

■Specification Table

Part Number	Shape	Model Features
E-CVGTN	Light Duty Side Guide Type	Tooth surface fabric for noise reduction, supports precision positioning and conveying

Part Number	B can be specified down to 10 mm increments	L Can be specified down to 5mm increments	Motor Selection			Belt Specifications	Motor
			Output Power (W)	Specifications	Gear Head Reduction Ratio
E-CVGTN	80 to 300 Minimum unit: 10 mm	365 to 2000	6 25 Note: 6 Not suitable for frequency conversion	SCM (Single-phase 220V Variable Speed Motor)	5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 Note: When the output power is 6, 5–10 is not applicable	H(General-purpose · White toothed surface tape) S(For sliding · Green double-sided tape) D(Antistatic · Black double-sided tape) J(No belt)	G(GPG Motor) J(JSCC Motor)
				INV (Three-Phase 220V Induction Motor)
				NM(No Motor)	NH(No Gear Head)		R(No Motor · Gear Head)

If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.

When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.

When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.

For belts other than those listed above, please refer to the specification overview. Click

here.

■ Conveying Capacity
MISUMI Belt Conveyor Load Capacity

The chart shows the conveying capacity under horizontal conditions.

The conveying capacity may vary depending on the operating conditions.

When selecting a speed control motor, the conveying capacity does not increase as the speed decreases.

■ Gear Head Reduction Ratio

May decrease depending on load conditions

*Reference value

Gear Head Reduction Ratio	Timing Belt Speed (m/min)
Gear Head Reduction Ratio	SCM Speed Control Type	INV Inverter Type
5	25.4 to 42.4	52.8
7.5	17.0 to 28.3	35.2
10	12.7 to 21.2	26.4
12.5	10.2 to 17.0	21.1
15	8.5 to 14.1	17.6
18	7.1 to 11.8	14.7
25	5.1 to 8.5	10.6
30	4.2 to 7.1	8.8
36	3.5 to 5.9	7.3
50	2.5 to 4.2	5.3
60	2.1 to 3.5	4.4
75	1.7 to 2.8	3.5
90	1.4 to 2.4	2.9
100	1.3 to 2.1	2.6
120	1.1 to 1.8	2.2
150	0.8 to 1.4	1.8
180	0.7 to 1.2	1.5

Product Features

Feature 1: Simplifies belt replacement steps and improves maintainability.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.

Precautions

(1) When installing onto equipment, ensure the flatness of the aluminum profile.
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
MISUMI Belt Conveyor Standard Transport Direction

MISUMI Belt Conveyor Standard Transport Direction

Application Industries

Equipment Production	Semiconductor	Lithium battery

Food	Electronic & Electrical Appliances	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-CVGTN-[80-300/10]-[365-2000/5]-6-[NM,SCM]-NH-[D,H,J,S]-[G,J,R]
E-CVGTN-[80-300/10]-[365-2000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[D,H,J,S]-[G,J,R]
E-CVGTN-[80-300/10]-[365-2000/5]-25-[INV,NM,SCM]-NH-[D,H,J,S]-[G,J,R]
E-CVGTN-[80-300/10]-[365-2000/5]-25-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[D,H,J,S]-[G,J,R]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Conveyance Length	Belt Width/Belt Pitch B (mm)	Output Power (W)	Specifications	Gear Head Reduction Ratio	Belt Specifications	Motor
-	1 Piece(s)	18 Day(s)	365 ～ 2000	80 ～ 300	6	SCM (Single-phase 220 V Speed Control Type) / NM (No Motor)	NH (Gearless Head)	Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt	G (Taibang Motor) / J (Precision Motor) / R (No Motor · Gear Head)
-	1 Piece(s)	18 Day(s)	365 ～ 2000	80 ～ 300	6	SCM (Single-phase 220 V Speed Control Type)	5 ～ 90	Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt	G (Taibang Motor) / J (Precision Motor) / R (No Motor · Gear Head)
-	1 Piece(s)	18 Day(s)	365 ～ 2000	80 ～ 300	25	INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor)	NH (Gearless Head)	Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt	G (Taibang Motor) / J (Precision Motor) / R (No Motor · Gear Head)
-	1 Piece(s)	18 Day(s)	365 ～ 2000	80 ～ 300	25	INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type)	5 ～ 90	Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt	G (Taibang Motor) / J (Precision Motor) / R (No Motor · Gear Head)

Loading...Tải…

Basic InformationThông tin cơ bản

Drive Module Position	Multi-Track Center Drive	Meandering Prevention	Pulley crowned for meandering prevention	Tail Roller Dia. D (Tail Transfer Part R)(mm)	30
Drive Roller Dia.(mm)	50	Type	Light Duty Side Guide Type

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Can the conveyor's operating direction be set to reverse?: Answer:Answer: The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.
Question:Question: Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?: Answer:Answer: The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.
Question:Question: If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?: Answer:Answer: For this situation, please contact customer service for customization to meet your individual needs.
Question:Question: If I need a stepper motor or a servo motor, can you provide them?: Answer:Answer: You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.

Check other FAQ (1 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Economy Conveyor Synchronous Timing Belt Double-Row Head Drive Pulley Diameter 30 mm	Economy Conveyor, Single-Row Center Drive with Synchronous Timing Belt Pulley Diameter 19 mm 20 mm	Economy Conveyor with Synchronous Timing Belt, Double Row Center Drive Pulley Diameter 50 mm

Representative Model: E-CVGTA	Representative Model: E-CVSTR	Representative Model: E-CVGTP

(1) Motor Wiring Method	Click here
(2) Flat Belt List of Specifications	Click here
(3) Deviation Adjustment Method	Click here
(4) Conveyor Body Weight	Click here

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Conveyance Length

Belt Width/Belt Pitch B(mm)

Output Power (W)

Specifications

Gear Head Reduction Ratio

Belt Specifications

Motor

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 30mm

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều