What is the accuracy of MISUMI's electric cylinders?

Repeatability accuracy is ±0.01 mm.

What are the types of MISUMI electric cylinders?

There are three main types: standard electric cylinders, high-thrust electric cylinders with a reducer, and radial load electric cylinders. They can be used with motors ranging from 50W to 2000W.

Do MISUMI electric cylinders come with a motor?

The motor is supplied by the customer. We manufacture the motor mounting plate according to the motor brand specified by the customer.

How much thrust does the electric cylinder have?

The thrust of the electric cylinder = motor torque × reduction ratio × 2π × 0.85 / lead. When using a motor with the power specified in the catalog, the thrust can be selected from 85N to 25,500N.

Can electric cylinders be used in cleanroom environments?

Electric cylinders can be custom-made according to customer requirements, including special specifications, non-standard strokes, and for use in cleanroom environments.

Does the electric cylinder come with a sensor switch?

Optional two-wire normally open magnetic sensors are available; you can select 0 to 3 sensors.

How to maintain an electric cylinder?

The electric cylinder body of high-load, high-speed products (above 400W) comes with a grease fitting. Lubricate the ball screw regularly according to usage frequency. Replenish grease after 300 hours of operation during initial use. Ensure to add grease every 2,000 hours of operation from now on.

Which type of grease is better?

It is recommended to use GB7324-1994 general lithium-based grease No. 3, such as Mobil lithium-based grease EP3 (liquid lubricants are prohibited).

What is the operating environment temperature?

Normal temperature (-20°C to 40°C), non-corrosive and non-flammable gases, free from iron filings, dust, oil mist, moisture, salt, and other humid environments.

What is the maximum achievable speed?

Electric cylinder rated speed = motor RPM × lead / (reduction ratio × 60). The maximum speed configuration of the main unit can achieve 66 mm/s to 1000 mm/s. To avoid resonance, the speed should be appropriately reduced when the stroke exceeds 500.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(2 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-ECTLT110-10-S[50-1000/50]-[BC,RC]-RA[0,3,5]-[P2000W,Z]-[FA,HA]-C[0,1,2,3]

Stroke Lead Motor Position Motor Code & Power Installation Method Reducer Reduction Ratio Number of Sensors type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Stroke(mm)
[50-1000/50mm Unit(s)]
ClearTrống
Lead
- 10
- 20
ClearTrống
Motor Position
- BC Direct Connection
- RC Parallel
ClearTrống
Motor Code & Power
- P2000W (Panasonic, Delta, Hiconics)
- Z
ClearTrống
Installation Method
- FA Front Flange
- HA Horizontal
ClearTrống
Reducer Reduction Ratio
3：1

5：1

Without Gear Reducer
ClearTrống
Number of Sensors(PCS)
0

1

2

3
ClearTrống
type
- E-ECTLT110
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

14 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Electric Cylinders High Thrust with Gearbox Type E-ECTLT110

Name: Electric Cylinders High Thrust with Gearbox Type E-ECTLT110
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (10 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview

An electric cylinder refers to a device that uses a motor and a screw mechanism to convert rotary motion into linear motion, thereby driving the extension and retraction of a push rod.
Compared to traditional hydraulic and pneumatic devices, it features energy saving, space saving, low noise, pollution-free operation, and low maintenance costs, achieving the goal of overall cost reduction.
The structure of MISUMI electric cylinders consists of an aluminum alloy body, ball screw, and push rod. Machining and installation holes for general-purpose motor brands specified by the customer; motor and optional sensor switch are self-supplied.

Dimensional Drawing

■ Motor Position
BC(Direct Coupling)

RC(Parallel)

■ Basic SPEC

Body Width	□110
Ball Screw	⌀40 (C7)
Repeatability	±0.02

Components	Body	Sliding Sleeve	Push Rod	Motor Mounting Plate
Material	Aluminum	Aluminum	S45C	Iron
Surface Treatment	Clear Anodized	-	Chrome Plated	Nickel Plated

E-ECTLT110 Effective Stroke S		50	100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000
L	Direct Connection	590	640	690	740	790	840	890	940	990	1040	1090	1140	1190	1240	1290	1340	1390	1440	1490	1540
L	Parallel	542	592	642	692	742	792	842	892	942	992	1042	1092	1142	1192	1242	1292	1342	1392	1442	1492
Weight kg (Reference)	Direct Connection	32	34	35	37	38	40	41	43	44	46	47	49	50	52	53	55	56	58	59	61
	Parallel	45	47	48	50	51	53	54	56	57	59	60	62	63	65	66	68	69	71	72	74
	Reducer	7

Specification Table

Please order after selecting part number and parameters according to the selection steps

		Part Number (Type)	-	Lead	-	Stroke S	-	Motor Position	-	Reducer	-	Motor Code	-	Mounting Method	-	Number of Sensors
		E—ECTLT110	-	10	-	S400	-	RC	-	RA0	-	P2000W	-	HA	-	C3

Part number

Stroke S

Motor
Position

Reducer

Motor Code

Mounting
Method

Sensor
Quantity

Reduction
Ratio

Rated
Thrust
(N)

Maximum
Speed
(mm/s)^※1

Maximum Transportable
Weight (kg)

Repeatability
Positioning Accuracy
(mm)

Body
Width

Ball
Screw

Type

Lead
(mm)

Specify 50 mm
Unit

Code

Power
W

Horizontal
Use

Vertical
Use

E—ECTLT110

50 to 1000

BC
(Direct Connection)
RC
(Parallel)

RA0
(Do not)
RA3
(3 comparisons)
RA5
(5:1 ratio)

P
(List)
Z
(Specified)

2000W

FA
(Front Flange)
HA
(Horizontal)

C0
(Do not)
C1
(1 piece)
C2
(2)
C3
(3 pcs)

3:1

15301

111

1217

437

±0.02

□110

⌀40
(C7)

5:1

25501

2029

728

3:1

7650

222

608

218

5:1

12750

133

1014

364

*1 The maximum speed is a reference value based on the maximum servo motor speed of 2000 rpm. When the stroke exceeds 300, the speed must be reduced accordingly to avoid resonance.

This product does not include a motor; customers need to purchase the motor separately. When specifying motor code Z, please provide the motor shaft diameter and installation dimensions.

It is recommended to set the motor acceleration/deceleration time to at least 0.2 seconds.

RA0 means the customer will prepare the reducer. Please refer to the 3D drawing to confirm the installation dimensions (standard reducer retained). If not consistent, please provide the gearbox dimensions. A gearbox mounting plate will be included with the shipment.

■ Motor Code to Brand Reference Table

Code	Brand
P	Panasonic Delta Hiconics
Z	Optional

■ Motor Mounting Hole Diagram

■ Recommended Servo Motor Compatibility List

Brand	Motor Code	With or without brake	Motor Power	Power Voltage	Servo Motor Model	Servo Drive Model
Panasonic	P	No Brake (Horizontal Installation)	50W	220V	MSMF5AZL1U2M	MADLN05SE
		With Brake (Vertical Installation)			MSMF5AZL1V2M
		No Brake (Horizontal Installation)	100W		MSMF012L1U2M	MADLN05SE
		With Brake (Vertical Installation)			MSMF012L1V2M
		No Brake (Horizontal Installation)	200W		MHMF022L1U2M	MADLN15SE
		With Brake (Vertical Installation)			MHMF022L1V2M
		No Brake (Horizontal Installation)	400W		MHMF042L1U2M	MBDLN25SE
		With Brake (Vertical Installation)			MHMF042L1V2M
		No Brake (Horizontal Installation)	750W		MHMF082L1U2M	MCDLN35SE
		With Brake (Vertical Installation)			MHMF082L1V2M
		No Brake (Horizontal Installation)	1000W		MDMF102L1G6M	MDDLN45SE
		With Brake (Vertical Installation)			MDMF102L1H6M
		No Brake (Horizontal Installation)	1500W		MDMF152L1G6	MDDLN55SE
		With Brake (Vertical Installation)			MDMF152L1H6
		No Brake (Horizontal Installation)	2000W		MDMF202L1G6	MEDLN83SE
		With Brake (Vertical Installation)			MDMF202L1H6
MITSUBISHI	M	No Brake (Horizontal Installation)	50W	220V	HG-MR053	MR-J4-10B
		With Brake (Vertical Installation)			HG-MR053B
		No Brake (Horizontal Installation)	100W		HG-KN13J-S100	MR-JE-10A
		With Brake (Vertical Installation)			HG-KN13BJ-S100
		No Brake (Horizontal Installation)	200W		HG-KN23J-S100	MR-JE-20A
		With Brake (Vertical Installation)			HG-KN23BJ-S100
		No Brake (Horizontal Installation)	400W		HG-KN43J-S100	MR-JE-40A
		With Brake (Vertical Installation)			HG-KN43BJ-S100
		No Brake (Horizontal Installation)	750W		HG-KN73J-S100	MR-JE-70A
		With Brake (Vertical Installation)			HG-KN73BJ-S100
		No Brake (Horizontal Installation)	1000W		HG-SN102J-S100	MR-JE-100A
		With Brake (Vertical Installation)			HG-SN102BJ-S100
		No Brake (Horizontal Installation)	1500W		HG-SN152J-S100	MR-JE-200A
		With Brake (Vertical Installation)			HG-SN152BJ-S100
Yaskawa	M	No Brake (Horizontal Installation)	50W	220V	SGM7J-01AFC6S	SGD7S-R90A00A002
		With Brake (Vertical Installation)			SGM7J-01AFC6E
		No Brake (Horizontal Installation)	100W		SGM7J-01AFC6S	SGD7S-R90A00A002
		With Brake (Vertical Installation)			SGM7J-01AFC6E
		No Brake (Horizontal Installation)	200W		SGM7J-02AFC6S	SGD7S-1R6A00A002
		With Brake (Vertical Installation)			SGM7J-02AFC6E
		No Brake (Horizontal Installation)	400W		SGM7J-04AFC6S	SGD7S-2R8A00A002
		With Brake (Vertical Installation)			SGM7J-04AFC6E
		No Brake (Horizontal Installation)	750W		SGM7J-08AFC6S	SGD7S-5R5A00B202
		With Brake (Vertical Installation)			SGM7J-08AFC6E
Delta	M	No Brake (Horizontal Installation)	100W	220V	ECM-B3L-C20401RS1	ASD-B3-0121-L
		With Brake (Vertical Installation)			ECM-B3L-C20401SS1
		No Brake (Horizontal Installation)	200W		ECM-B3M-C20602RS1	ASD-B3-0221-L
		With Brake (Vertical Installation)			ECM-B3M-C20602SS1
		No Brake (Horizontal Installation)	400W		ECM-B3M-C20604RS1	ASD-B3-0421-L
		With Brake (Vertical Installation)			ECM-B3M-C20604SS1
		No Brake (Horizontal Installation)	750W		ECM-B3M-C20807RS1	ASD-B3-0721-L
		With Brake (Vertical Installation)			ECM-B3M-C20807SS1
	P	No Brake (Horizontal Installation)	1000W		ECM-B3M-E21310RS1	ASD-B3-0121-L
		With Brake (Vertical Installation)			ECM-B3M-E21310SS1
		No Brake (Horizontal Installation)	1500W		ECM-B3M-E21315RS1	ASD-B3-1521-L
		With Brake (Vertical Installation)			ECM-B3M-E21315SS1
		No Brake (Horizontal Installation)	2000W		ECM-B3M-E21320RS1	ASD-B3-2023-L
		With Brake (Vertical Installation)			ECM-B3M-E21320SS1

■ Accessories

Name		Shape	2000W
Direct Connection	Coupling	With keyway Fastening bolt type	Outer Diameter	Screw Rod End	Motor End
			⌀80	⌀32	⌀25
Parallel	Screw Shaft End Timing Pulley	With keyway Iron + Nickel Plated	8M—40 Teeth × ⌀32
	Motor Side Timing Pulley		8M—40 Teeth × ⌀25
	Timing Belt	Rubber + Glass Fiber	640-8M-50
Sensor (Optional)		2-wire DC Normally Open DMST-020-2M

■ Gear Reducer Dimension Diagram

■ E-ECTLT Inductive Switch Parameters
Motor Mounting Hole Diagram

■ Sensor Wiring Diagram

■ Proximity Switch Parameters

Part number

Output Method

Mounting Method

Sensing Method

Operating Voltage

Current Consumption

Output Current

Repeatability

Switching Frequency

Indicator Lamp

Operating environment temperature

Wiring Length

Protection Rating

DMST
DMSE

D: DC 2-wire Normally Open

Groove/Fixture

Magnetic Ring NS Center

5 to 30 V DC

≤ 0.05 mA

≤ 100 mA

< 0.2 mm

≤ 2000 Hz

Output Red Indicator Light

-20 to +70°C

2 m

IP67

Product Features

■ Structure
Product Feature

Feature 1: Repeat positioning accuracy is ±0.01
Feature 2: The structure of the electric cylinder consists of an aluminum alloy body, ball screw, and push rod. Custom motor, optional sensor switch.
Feature 3: The motor mounting plate is machined with mounting holes according to the specified general-purpose motor brand
Feature 4: Uses a high-precision ball screw for smooth movement
Feature 5: Commonly used for vertical installation, can replace cylinders to achieve lifting, extending, and other functions

Main Unit Installation	Front Flange Mounting

Horizontal Mounting	With Guide Mechanism Installation

Usage Method

■ Motor Installation and Timing Belt Adjustment Method
Standard Type Direct Coupling_E-ECTL
Usage Method

1) Open the plastic hole cover and manually rotate the coupling bolt to the position of the round hole in the plastic cover
2) Use a wrench through the round hole to loosen the bolt on the coupling, then tighten it again after installing the motor
3) Finally, put the plastic hole cover back in place to complete the motor installation

Standard Type Parallel_E-ECTL
Usage Method

1) Remove the cover, install the motor, and note that the motor screws should not be tightened yet so that the motor can move up and down
2) Install the timing pulley on the motor side, making sure it is parallel to the timing pulley on the screw shaft end
3) Tighten the screws on the timing pulley and put on the timing belt
4) Adjust the belt tension using the adjustment screw on the main body
5) Use a tension tester to measure the belt tension and ensure it is within the reference range (see table below)
6) Finally, tighten the motor mounting screws to complete the motor installation and timing pulley adjustment

Parallel Electric Cylinder Tension Value (Reference)

Motor Power W	Electric Cylinder Model	Belt Specifications	Belt Width (mm)	Belt Center Distance (mm)	Belt Mass (M)	Tension Value N (Reference)
100W	E-ECTL40/E-ECRL5	2GT	12	55	1.3	12 to 17
200W	E-ECTL50/E-ECRL8	3GT	15	81	2.5	32 to 42
400W	E-ECTL60/E-ECRL8
	E-ECTLT60	5GT		75	4	60 to 75
750W	E-ECTL75/E-ECRL10			107
	E-ECTLT75	8YU	25	104	5.2	125 to 155
1000W	E-ECTL90/E-ECTLT90	8M	30	128	6.1	409 to 450
1500W
2000W	E-ECTL90
	E-ECTLT110		50	160		573 to 630

Precautions

■ Precautions for Use
(1) The operating ambient temperature should be normal (—20°C to 40°C). Do not use in environments containing corrosive or flammable gases, electromagnetic interference, or humidity.
(2) The installation surface must be vibration-resistant and able to withstand pressure. The flatness requirement is within ±0.05 mm/500 mm.
(3) When the electric cylinder is installed vertically, a motor with a brake device must be selected.
(4) Prevent the electric cylinder from being subjected to vibration or impact. The operating conditions must ensure that the push rod avoids rotation and prevent deformation of the cylinder body.

Example of Use

■ Standard Electric Cylinder Usage Example
Application: Transfer Mechanism
· By utilizing the telescopic function of the vertically mounted electric cylinder, transfer items between conveyors at different heights
· The transplanting mechanism uses an electric cylinder for smooth and fast lifting, preventing damage to items during pick-and-place operations.

Example of Use

Application Industries

Smart phone	Electronic & Electrical Appliances	Lithium battery

Automotive	Robotics	Medical

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-ECTLT110-10-S[50-1000/50]-[BC,RC]-RA[0,3,5]-[P2000W,Z]-[FA,HA]-C[0,1,2,3]
E-ECTLT110-20-S[50-1000/50]-[BC,RC]-RA[0,3,5]-[P2000W,Z]-[FA,HA]-C[0,1,2,3]

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Stroke (mm)	Lead	Motor Position	Motor Code & Power	Installation Method	Reducer Reduction Ratio	Number of Sensors (PCS)
	-	1 Piece(s)		14 Day(s)	50 ～ 1000	10	BC Direct Connection / RC Parallel	P2000W (Panasonic, Delta, Hiconics) / Z	FA Front Flange / HA Horizontal	3：1 / 5：1 / Without Gear Reducer	0 ～ 3
	-	1 Piece(s)		14 Day(s)	50 ～ 1000	20	BC Direct Connection / RC Parallel	P2000W (Panasonic, Delta, Hiconics) / Z	FA Front Flange / HA Horizontal	3：1 / 5：1 / Without Gear Reducer	0 ～ 3

Loading...Tải…

Basic InformationThông tin cơ bản

Drive method	Ball Screw	Maximum speed(mm/sec)	~500	Main body/parts	Main body
Linear guide	a: None	Positioning Repeatability(μm)	±10	Environmental Specifications	Standard Environment

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is the accuracy of MISUMI's electric cylinders?: Answer:Answer: Repeatability accuracy is ±0.01 mm.
Question:Question: What are the types of MISUMI electric cylinders?: Answer:Answer: There are three main types: standard electric cylinders, high-thrust electric cylinders with a reducer, and radial load electric cylinders. They can be used with motors ranging from 50W to 2000W.
Question:Question: Do MISUMI electric cylinders come with a motor?: Answer:Answer: The motor is supplied by the customer. We manufacture the motor mounting plate according to the motor brand specified by the customer.
Question:Question: How much thrust does the electric cylinder have?: Answer:Answer: The thrust of the electric cylinder = motor torque × reduction ratio × 2π × 0.85 / lead. When using a motor with the power specified in the catalog, the thrust can be selected from 85N to 25,500N.
Question:Question: Can electric cylinders be used in cleanroom environments?: Answer:Answer: Electric cylinders can be custom-made according to customer requirements, including special specifications, non-standard strokes, and for use in cleanroom environments.
Question:Question: Does the electric cylinder come with a sensor switch?: Answer:Answer: Optional two-wire normally open magnetic sensors are available; you can select 0 to 3 sensors.
Question:Question: How to maintain an electric cylinder?: Answer:Answer: The electric cylinder body of high-load, high-speed products (above 400W) comes with a grease fitting. Lubricate the ball screw regularly according to usage frequency. Replenish grease after 300 hours of operation during initial use. Ensure to add grease every 2,000 hours of operation from now on.
Question:Question: Which type of grease is better?: Answer:Answer: It is recommended to use GB7324-1994 general lithium-based grease No. 3, such as Mobil lithium-based grease EP3 (liquid lubricants are prohibited).
Question:Question: What is the operating environment temperature?: Answer:Answer: Normal temperature (-20°C to 40°C), non-corrosive and non-flammable gases, free from iron filings, dust, oil mist, moisture, salt, and other humid environments.
Question:Question: What is the maximum achievable speed?: Answer:Answer: Electric cylinder rated speed = motor RPM × lead / (reduction ratio × 60). The maximum speed configuration of the main unit can achieve 66 mm/s to 1000 mm/s. To avoid resonance, the speed should be appropriately reduced when the stroke exceeds 500.

Check other FAQ (7 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Economic type Aluminum alloy embedded module	Economy Type Module KS Series	Economy Electric Cylinder Radial Load Type

Representative Model: E-MGT5-L10-100-BC-P10-C	Representative Model: C-KS4001-B1-100-F1-W2	Representative Model: E-ECRL5-05-S100-BC-P100W

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Stroke(mm)

Lead

Motor Position

Motor Code & Power

Installation Method

Reducer Reduction Ratio

Number of Sensors(PCS)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Electric Cylinders High Thrust with Gearbox Type E-ECTLT110

Copy Part Number URL to Clipboard

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều