(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more
Product Detail
Grade
Color
Hole Drilling
Finishing Method
Length, A Dimension
Width, B Dimension
Plate Thickness, T Dimension
A/B Dimension Tolerance
T Dimension Tolerance
Through Hole, Bolt Nominal Diameter
Counterbore Hole, Bolt Nominal Diameter
Threaded Insert, Bolt Nominal Diameter
A Side Pitch, F Dimension
B Side Pitch, G Dimension
Cleaning Method
Finishing
T Dimension Tolerance
AB Dimension Tolerance
type
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Grade
- Standard
- Conductive
- Sliding
-
Color
- Black Color
- Gray Color
-
Hole Drilling
-
Finishing Method
- Circular Saw Cutting
- Circular Saw Cutting, Right Angle Assurance
- Side Milling, etc.
- 6-Sided Milling, etc.
- Upper and Lower Side Milling, etc.
-
Length, A Dimension(mm)
-
Width, B Dimension(mm)
-
Plate Thickness, T Dimension(mm)
-
A/B Dimension Tolerance(mm)
-
T Dimension Tolerance(mm)
-
Through Hole, Bolt Nominal Diameter
-
Counterbore Hole, Bolt Nominal Diameter
-
Threaded Insert, Bolt Nominal Diameter
-
A Side Pitch, F Dimension(mm)
-
B Side Pitch, G Dimension(mm)
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Finishing
- 4-side Milling
- 6-surface Milling
- Circular Sawing
- Guaranteed Perpendicularity of Circular Saw Cuts
- Upper-lower Surface Milling
-
T Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
-
AB Dimension Tolerance
- M(0/-)
- Q(+/0)
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
- N(±)
-
type
- SH-PKA
- SH-PKA2F□
- SH-PKA2F□□H
- SH-PKA4F□
- SH-PKA6F□□
- SH-PKAH
- SH-PKAH2F□
- SH-PKAH2F□□H
- SH-PKAH4F□
- SH-PKAH6F□□
- SH-PKAHNT□
- SH-PKAH□H
- SH-PKANT□
- SH-PKA□H
- SH-PKCA
- SH-PKCA2F□
- SH-PKCA2F□□H
- SH-PKCA4F□
- SH-PKCA6F□□
- SH-PKCANT□
- SH-PKCA□H
- SL-PKA
- SL-PKA2F□
- SL-PKA2F□□H
- SL-PKA4F□
- SL-PKA6F□□
- SL-PKAH
- SL-PKAH2F□
- SL-PKAH2F□□H
- SL-PKAH4F□
- SL-PKAH6F□□
- SL-PKAHNT□
- SL-PKAH□H
- SL-PKANT□
- SL-PKA□H
- SL-PKCA
- SL-PKCA2F□
- SL-PKCA2F□□H
- SL-PKCA4F□
- SL-PKCA6F□□
- SL-PKCANT□
- SL-PKCA□H
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 7 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
Specify AlterationsChỉ định thay đổi
[Clean & Pack]PEEK Plates
![[Clean & Pack]PEEK Plates](http://vn.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311033829_002.jpg?$product_main$)
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- There is no discoloration or dimensional change due to cleaning.
Similar Products
Product DetailProduct Description
Two types of cleaning methods are available: "degreasing" and "precision cleaning." They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
| Cleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case |
| Degreasing | SL-□□ | Anti-rust packing | Removal of organic stains | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Removal of organic stains Removal of contamination and dusts | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process |
[Features]·PEEK is a super Engineered Plastic with high heat and chemical resistance.
■ Standard Type
| Finish | 4 Sides | Upper-Lower Surface | ||
| Machining Method | Surface texture | Machining Method | Surface texture | |
| Circular sawing | Circular sawing |  | Material |  |
| Guaranteed Perpendicularity of Circular Saw Cuts (NT) | Circular sawing | | Material | |
| 4-side Milling, etc. * (4F) | Milling, etc.* |  | Material |  |
| 6-surface Milling, etc. * (6F) | Milling, etc.* | | Milling, etc.* | |
| Upper-lower Surface Milling, etc. * (2F) | Circular sawing | | Milling, etc.* | |
| [ ! ] The roughness values of the material surface are for reference only. | ||||
■ Hole Machined Type
2H
2HL
4H
6H
| Nominal Dia. | b (Minimum Value) |
| 3 to 10 | 2.5 |
| Finish | 4 Sides | Upper-Lower Surface | ||
| Machining Method | Surface texture | Machining Method | Surface texture | |
| Circular sawing | Circular sawing | | Material | |
| Upper-lower Surface Milling, etc.* | Circular sawing | | Milling, etc.* | |
| [ ! ] The roughness values of the material surface are for reference only. | ||||
| Hole Machining Details | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| N (Through Hole) | Z (Counterbored Hole) | N (Through Hole) / Z (Counterbored Hole) Details | M (Threaded Insert) | ■Table 1 M (Thread Insert) Details | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |  |
|  Ordering Code (Example) M4-L6 [ ! ]L ≤ T－1 [ ! ] When L + 5 < T, drilled holes will be blind ones. |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | [M] Material | [M] Grade | Color | Operating Ambient Temperature | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||||
| SL-PKA | PEEK | Standard | Ash Brown | −50 to 250°C | Degreasing | General environment | Single packing | General environment |
| SH-PKA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| SL-PKAH | Sliding | Black | Degreasing | General environment | Single packing | General environment | ||
| SH-PKAH | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| SL-PKCA | Electric Conductivity | Black | Ambient Temperature: Up to 250°C | Degreasing | General environment | Single packing | General environment | |
| SH-PKCA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
[!]Milled* = By using a milling cutter or router/planer
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
■ Standard Type
| Part Number | — | A | — | B | — | T | |
| · Circular Sawing | SL-PKA | — | 300 | — | 200 | — | 5 |
| · Guaranteed Perpendicularity of Circular Saw Cuts | SL-PKANTQ | — | 200.5 | — | 100.5 | — | 10 |
| ·4-surface Milling* | SL-PKA4FN | — | 150.5 | — | 100.3 | — | 16 |
| · 6-surface Milling, etc.* | SH-PKA6FMN | — | 100.3 | — | 90.5 | — | 10.5 |
| ·Upper-lower Surface Milling, etc.* | SH-PKA2FQ | — | 80 | — | 50 | — | 5 |
■ Hole Machined Type
| Part Number | — | A | — | B | — | T | — | F | — | G | — | Screw Nominal Dia. | — | L |
| SL-PKA2H | — | 50 | — | 25 | — | 8 | — | F34 | — | G10 | — | N4 | ||
| SH-PKCA2H | — | 150 | — | 120 | — | 10 | — | F80 | — | G60 | — | M8 | — | L8 |
■ Standard Type
• Dimensional Tolerance of A and B
| A·B | A, B Dimension Tolerance |
| Unit: mm | |
| Up to 99 | ±0.5 |
| 100 to 250 | ±0.75 |
| 251 or more | ±1.0 |
• T Dimension Tolerance, Rate of Camber and Torsion
| T | T Dimension Tolerance | Rates of Camber and Torsion | ||
| SL-PKA SH-PKA | SL-PKAH SH-PKAH | SL-PKCA SH-PKCA | per 1,000 mm | |
| 1 | +0.1 to +0.5 | — | — | — |
| 2·3 | ±0.3 | — | — | — |
| 5 to 10 | 0 to +1.1 | 0 to +1.1 | 0 to +1.1 | 1.2% or less |
| 12 to 25 | 0 to +1.7 | — | 0 to +1.7 | 0.8% or less |
| 30·40 | 0 to +2.5 | — | — | — |
Precision Guarantee
| Finish | Width Parallelism | Perpendicularity of Reference Plane |
| per 100 mm | ||
| Guaranteed Perpendicularity of Circular Saw Cuts (NT) | 0.1 | 0.1 |
| 4-side Milling (4F) | ||
| 6-surface Milling (6F) | ||
■ Hole Machined Type
• Dimensional Tolerance of A and B
• T Dimension Tolerance, Rate of Camber and Torsion
• Dimensional Tolerance of A and B
| A·B | A, B Dimension Tolerance |
| Unit: mm | |
| Up to 99 | ±0.5 |
| 100 to 250 | ±0.75 |
| 251 or more | ±1.0 |
• T Dimension Tolerance, Rate of Camber and Torsion
| T | T Dimension Tolerance | Rates of Camber and Torsion | ||
| SL-PKA SH-PKA | SL-PKAH SH-PKAH | SL-PKCA SH-PKCA | per 1,000 mm | |
| 1 | +0.1 to +0.5 | — | — | — |
| 2·3 | ±0.3 | — | — | — |
| 5 to 10 | 0 to +1.1 | 0 to +1.1 | 0 to +1.1 | 1.2% or less |
| 12 to 25 | 0 to +1.7 | — | 0 to +1.7 | 0.8% or less |
| 30 | 0 to +2.5 | — | — | — |
■ Standard Type
| Part Number | By material | A | B | T | |||||||
| Type | Finish Selection | T Dimension Tolerance | A, B Dimension Tolerance | Dimension Range | |||||||
| (Standard) | Circular sawing | 1 mm Increments | Selection | ||||||||
| SL-PKA | — | Not available | Not available | SL-PKA SH-PKA | 20 to 500 | 20 to 400 | 1·2·3·5·6·8·10·12 | ||||
| SH-PKA | 20 to 250 | 20 to 150 | 16·20·25·30·40 | ||||||||
| SL-PKAH SH-PKAH | 20 to 300 | 20 to 200 | 5·8·10 | ||||||||
| (Sliding) | SL-PKCA SH-PKCA | 10 | |||||||||
| SL-PKAH | 20 to 250 | 20 to 150 | 16·20 | ||||||||
| SH-PKAH | Guaranteed Perpendicularity of Circular Saw Cuts (NT) | 0.5 mm Increments | Selection | ||||||||
| NT | Not available | T5·6·8·10 | T12·16·20 | T25 | T30·40 | SL-PKA SH-PKA | 20 to 300 | 20 to 200 | 5·6·8·10·12 | ||
| (Conductive Grade) | Q | 0 to +0.3 | 0 to +0.4 | 0 to +0.5 | 0 to +0.7 | 20 to 250 | 20 to 150 | 16·20·25·30·40 | |||
| SL-PKCA | N | ±0.2 | ±0.3 | ±0.4 | ±0.6 | SL-PKAH SH-PKAH | 20 to 300 | 20 to 200 | 5·8·10 | ||
| SH-PKCA | M | －0.3 to 0 | －0.4 to 0 | －0.5 to 0 | －0.7 to 0 | SL-PKCA SH-PKCA | 10 | ||||
| 20 to 250 | 20 to 150 | 16·20 | |||||||||
| 4-surface Milling* (4F) | 0.1 mm Increments | Selection | |||||||||
| 4F | Not available | Q 0 to +0.2 | SL-PKA SH-PKA | 10 to 300 | 10 to 200 | 5·6·8·10·12 | |||||
| N ±0.1 | 10 to 250 | 10 to 150 | 16·20·25·30·40 | ||||||||
| M －0.2 to 0 | SL-PKAH SH-PKAH | 10 to 300 | 10 to 200 | 5·8·10 | |||||||
| SL-PKCA SH-PKCA | 10 | ||||||||||
| 10 to 250 | 10 to 150 | 16·20 | |||||||||
| 6-surface Milling, etc.* (6F) | 0.1 mm Increments | 0.1 mm Increments | |||||||||
| 6F | Q 0 to +0.2 | Q 0 to +0.2 | SL-PKA SH-PKA | 10 to 300 | 10 to 200 | 5 to 9 | |||||
| N ±0.1 | N ±0.1 | 10 to 250 | 10 to 150 | 9.1 to 39 | |||||||
| M -0.2 to 0 | M －0.2 to 0 | SL-PKAH SH-PKAH | 10 to 300 | 10 to 200 | 5 to 9 | ||||||
| SL-PKCA SH-PKCA | 9.1 to 10 | ||||||||||
| 10 to 250 | 10 to 150 | 10.1 to 19 | |||||||||
| Upper-lower Surface Milling, etc.* (2F) | 1 mm Increments | 0.1 mm Increments | |||||||||
| 2F | Q 0 to +0.2 | Not available | SL-PKA SH-PKA | 20 to 250 | 20 to 150 | 5 to 39 | |||||
| N ±0.1 | SL-PKAH SH-PKAH | 5 to 9 | |||||||||
| M -0.2 to 0 | SL-PKCA SH-PKCA | 9.1 to 19 | |||||||||
■ Hole Machined Type
[!] Dimension F Specification Range – 2H/4H type selection: d (d1) + 2.5 ≤ F ≤ A - d (d1) - 5; for 2HL: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5; for 6H: d (d1) + 2.5 ≤ F ≤ (A - d (d1) - 5)/2 is required.
[!]Dimension G Specification Range – 2H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5; for 2HL, 4H and 6H: d (d1) + 2.5 ≤ G ≤ B - d (d1) - 5 is required.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ] For Hole Machined Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | By material | T | F | G | ||
| Type | T Dimension Tolerance | Number of Holes | T Dimension Range | |||||
| (Standard) | Circular sawing | 1 mm Increments | Selection | 0.5 mm Increments | ||||
| SL-PKA | Not available | 2H(Horizontal) | 20 to 500 | 20 to 400 | SL-PKA SH-PKA | 1·2·3·5·6·8·10·12 | 6 to 491.5 (2H·4H) | 4.5 to 395.5 (2H) |
| SH-PKA | 2HL(Vertical) | 4.5 to 495.5 (2HL) | 6 to 391.5 (2HL·4H·6H) | |||||
| 4H | 6 to 245.5 (6H) | |||||||
| (Sliding) | 6H | 20 to 300 | 20 to 200 | SL-PKAH SH-PKAH | 5·8·10 | 6 to 291.5 (2H·4H) | 4.5 to 195.5 (2H) | |
| SL-PKAH | 4.5 to 295.5 (2HL) | 6 to 191.5 (2HL·4H·6H) | ||||||
| SH-PKAH | 20 to 300 | 20 to 200 | SL-PKCA SH-PKCA | 10 | 6 to 145.5 (6H) | |||
| 20 to 250 | 20 to 150 | SL-PKA SH-PKA | 16·20·25·30 | 6 to 241.5 (2H·4H) | 4.5 to 145.5 (2H) | |||
| (Conductive Grade) | 4.5 to 245.5 (2HL) | 6 to 141.5 (2HL·4H·6H) | ||||||
| SL-PKCA | SL-PKCA SH-PKCA | 16·20 | 6 to 120.5 (6H) | |||||
| SH-PKCA | Upper-lower Surface Milling, etc.* | 1 mm Increments | 0.1 mm Increments | 0.5 mm Increments | ||||
| 2FQ 0 to +0.2 | 2H(Horizontal) | 20 to 250 | 20 to 150 | SL-PKA SH-PKA | 5 to 29 | 6 to 241.5 (2H·4H) | 4.5 to 145.5 (2H) | |
| 2FN ±0.1 | 2HL(Vertical) | 4.5 to 245.5 (2HL) | 6 to 141.5 (2HL·4H·6H) | |||||
| 2FM －0.2 to 0 | 4H | SL-PKAH SH-PKAH | 5 to 9 | 6 to 120.5 (6H) | ||||
| 6H | SL-PKCA SH-PKCA | 9.1 to 19 | ||||||
[!]Dimension G Specification Range – 2H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5; for 2HL, 4H and 6H: d (d1) + 2.5 ≤ G ≤ B - d (d1) - 5 is required.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ] For Hole Machined Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| T Dimension | Hole Machined Type Screw Nominal Dia. Selection | ||||||||||||
| Through Hole | Counterbore Hole | Threaded Insert | |||||||||||
| N | Z | M | L | ||||||||||
| 1 to 3 | 3 4 5 6 8 10 | — | — | (Threaded Insert Length) Select from Table 1 | |||||||||
| 5 to 7 | 3 | 4 | |||||||||||
| 8 to 9 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 8 | |||||
| 10 to 15 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | 10 | ||||
| 16 to 30 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | |||
Alterations
■ Standard Type
[NG] Not applicable for Hole Machined Type.
[NG] Not applicable for T40
| Alterations | Corner Radius Machining | Corner Cut | |||
 |  | ||||
| Code | CRA·CRB·CRC·CRD | CCA·CCB·CCC·CCD | |||
| Spec. | Adds radius machining to any corner. R = 5 mm Increments [!] 10 ≤ A (B) - R (2R) [ ! ]5 ≤ CRA·CRB·CRC·CRD ≤ 100 Ordering code (Example) Adds R10 at the corner of A and C | Any corner can be cut. 5 ≤ corner cut ≤ 50 10 ≤ A - C (2C) or 10 ≤ B - C (2C) 5 mm Increments Ordering Code (Example) When the corners of A and D are cut by C5 | |||
[NG] Not applicable for T40
■ Hole Machined Type
| Alterations | Hole Position from Left | Hole Position from Bottom |
 |  | |
| Code | XC | YC |
| Spec. | XC = 0.5 mm Increments " ! " (2H/4H Type) d (d1 )/2 + 2.5 ≤ XC ≤ A - F - d (d1 )/2 - 2.5 " ! " (6H Type) d (d1 )/2 + 2.5 ≤ XC ≤ A - 2F - d (d1 )/2 - 2.5 | YC = 0.5 mm Increments [ ! ] d (d1 )/2 + 2.5 ≤ YC ≤ B - G - d (d1 )/2 - 2.5 [NG] Not available for 2H Type |
Cleaning Process· Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 IPA Cleaning |  |  Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | |  Use clean air blow | |  Single Packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: General environment | Working Environment: Class 1,000 | Working Environment: Class 10 | ||||||
|---|---|---|---|---|---|---|---|---|
IPA Cleaning | | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | |  Use clean air blow | | Use nitrogen blow | |  Degassing double packing |
Packaging ExampleDegreasing (Part Number: SL-□□) | Precision Cleaning (Part Number: SH-□□) [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Removal of organic stains | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Removal of organic stains Removal of contamination and dusts | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| SH-PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8] |
| SH-PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8] |
| SH-PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8] |
| SH-PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA2HL-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA2HL-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA2HL-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
| SH-PKA4H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA4H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA4H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8,10] |
| SH-PKA6H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-245.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKA6H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-245.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKA6H-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30]-F[6-245.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
| SH-PKA-[20-500/1]-[20-400/1]-[1,2,3,5,6,8,10,12,16,20,25,30,40] |
| SH-PKAH2FM2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKAH2FM2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKAH2FM2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6] |
| SH-PKAH2FM2HL-[20-250/1]-[20-150/1]-[5-9/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKAH2FM2HL-[20-250/1]-[20-150/1]-[5-9/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKAH2FM2HL-[20-250/1]-[20-150/1]-[5-9/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8] |
| SH-PKAH2FM4H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKAH2FM4H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| SH-PKAH2FM4H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6] |
| SH-PKAH2FM6H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10] |
| SH-PKAH2FM6H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Grade | Color | Hole Drilling | Finishing Method | Length, A Dimension (mm) | Width, B Dimension (mm) | Plate Thickness, T Dimension (mm) | A/B Dimension Tolerance (mm) | T Dimension Tolerance (mm) | Through Hole, Bolt Nominal Diameter | Counterbore Hole, Bolt Nominal Diameter | Threaded Insert, Bolt Nominal Diameter | A Side Pitch, F Dimension (mm) | B Side Pitch, G Dimension (mm) | Cleaning Method | Finishing | T Dimension Tolerance | AB Dimension Tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | －0.2 to 0 | - | 3 ～ 10 | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | - | 3 ～ 10 | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | 3 ～ 10 | - | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | 3 ～ 8 | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | 3 ～ 10 | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | －0.2 to 0 | - | 3 ～ 10 | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | ±0.10 | - | - | 3 ～ 10 | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | ±0.10 | 3 ～ 10 | - | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | ±0.10 | - | 3 ～ 10 | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | - | 3 ～ 10 | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | 3 ～ 10 | - | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | 3 ～ 8 | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | - | 3 ～ 10 | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | 3 ～ 10 | - | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | 3 ～ 10 | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | - | 3 ～ 10 | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | 3 ～ 10 | - | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | ±0.10 | - | 3 ～ 10 | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | N(±0.1) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | 0 to ＋0.2 | - | - | 3 ～ 10 | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | 0 to ＋0.2 | 3 ～ 10 | - | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 29 | - | 0 to ＋0.2 | - | 3 ～ 10 | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | - | 3 ～ 10 | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | 3 ～ 10 | - | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | 3 ～ 8 | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | - | 3 ～ 10 | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | 3 ～ 10 | - | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | 3 ～ 10 | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | - | 3 ～ 10 | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | 3 ～ 10 | - | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | - | 0 to ＋0.2 | - | 3 ～ 10 | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | Q(+0.2/0) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | - | 3 ～ 10 | 6 ～ 491.5 | 4.5 ～ 395.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | 3 ～ 10 | - | - | 6 ～ 491.5 | 4.5 ～ 395.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | 3 ～ 10 | - | 6 ～ 491.5 | 4.5 ～ 395.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | - | 3 ～ 10 | 4.5 ～ 495.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | 3 ～ 10 | - | - | 4.5 ～ 495.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 2HL | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | 3 ～ 8 | - | 4.5 ～ 495.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | - | 3 ～ 10 | 6 ～ 491.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | 3 ～ 10 | - | - | 6 ～ 491.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 4H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | 3 ～ 10 | - | 6 ～ 491.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | - | 3 ～ 10 | 6 ～ 245.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | 3 ～ 10 | - | - | 6 ～ 245.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Standard | Gray Color | 6H | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 30 | - | - | - | 3 ～ 8 | - | 6 ～ 245.5 | 6 ～ 391.5 | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Standard | Gray Color | No Drilling Alteration | Circular Saw Cutting | 20 ～ 500 | 20 ～ 400 | 1 ～ 40 | - | - | - | - | - | - | - | Precision Cleaning | Circular Sawing | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | 3 ～ 6 | - | 6 ～ 241.5 | 4.5 ～ 145.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | - | 3 ～ 10 | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | 3 ～ 10 | - | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 2HL | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | 3 ～ 8 | - | 4.5 ～ 245.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 4H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | 3 ～ 6 | - | 6 ～ 241.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | - | - | 3 ～ 10 | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - | ||
- | 1 Piece(s) | 11 Day(s) or more | Sliding | Black Color | 6H | Upper and Lower Side Milling, etc. | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | - | －0.2 to 0 | 3 ～ 10 | - | - | 6 ～ 120.5 | 6 ～ 141.5 | Precision Cleaning | Upper-lower Surface Milling | M(0/-0.2) | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Material | PEEK | Environmental Compliance | RoHS compliant (10 substances) | Material Name | PEEK |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy