(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(172 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-GAUS3-10

Free Length L Outer Dia. D Allowable Load (Configurable Range) Wire Dia. Material Length of Spring Used L+F Standard Spring Constant Max. Load Initial Tension Max. Deflection type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Free Length L(mm)
10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

100

175
ClearTrống
Outer Dia. D(Ø)
2

3

5

6

8

10

12

14

20
ClearTrống
Allowable Load (Configurable Range)(N)
- 1.26~3.50
- 3.51~8.00
- 8.01~15.00
- 15.01~30.00
- 30.01~60.00
- 60.01~110.00
- 110.01~
ClearTrống
Wire Dia.(Ø)
0.28

0.4

0.45

0.5

0.6

0.7

0.8

0.9

1

1.1

1.2

1.4

2.6
ClearTrống
Material
- SWP-B
ClearTrống
Length of Spring Used L+F(mm)
12.2

13.5

14

14.6

18.9

19.5

20.6

20.7

21

21.5

21.7

22.5

23.9

24.1

26.7

26.9

27.1

28.9

29

29.6

29.8

30.8

31

32.2

34.1

34.3

34.6

36.5

37.8

38.3

38.7

38.9

39.2

39.4

40.4

41.9

42.5

42.7

44.3

45.9

46.7

47.3

47.5

48.7

48.9

49

50.2

50.4

50.6

50.7

51.7

51.8

53.2

53.8

57.3

57.9

58.7

59.2

60.6

63.8

64

64.5

65

65.2

65.6

66.4

67.2

68.3

73.3

74.3

74.5

74.8

79.8

82.3

82.6

83

83.6

86.4

91.1

93.1

93.3

95.7

101.3

101.7

107.4

110

111.4

120

122.3

136.1

247.5
ClearTrống
Standard Spring Constant(N/mm)
0.13

0.14

0.18

0.23

0.26

0.27

0.29

0.31

0.32

0.37

0.39

0.43

0.49

0.5

0.51

0.52

0.55

0.56

0.57

0.59

0.6

0.62

0.64

0.66

0.68

0.69

0.7

0.74

0.78

0.88

0.89

0.93

0.98

1.03

1.08

1.18

1.27

1.28

1.32

1.47

1.57

1.6

1.77

1.86

2.06

2.16

2.26

2.39

2.45

2.75

2.81

2.94

3.14

3.39

4.17

4.23

4.51

5.58

5.69
ClearTrống
Max. Load(N)
2.45

4.41

4.81

6.37

6.47

8.43

8.53

12.94

17.26

23.24

30.99

47.7

49.03

62.76

74.53

150.04
ClearTrống
Initial Tension(N)
0.49

0.66

0.88

0.98

1.18

1.37

1.57

1.67

1.86

2.45

3.53

3.92

4.71

4.9

5.49

5.88

6.86

10.49

12.75

14.71

16.67

36.28
ClearTrống
Max. Deflection(mm)
2.2

3.5

3.9

4

4.5

4.6

5.6

5.7

5.8

6

6.5

6.7

6.9

7.1

7.5

7.8

8.3

8.7

8.9

9

9.1

9.3

9.6

9.8

10

10.2

10.4

10.7

10.9

11.7

11.8

12

12.2

12.5

12.7

12.9

13.2

13.7

13.9

14

14.2

14.3

14.4

15.2

15.4

15.6

16.4

16.9

17.3

17.5

18.7

18.8

18.9

19.2

19.3

19.5

20

20.2

20.6

21.7

22.2

22.3

23.1

23.7

23.8

24

24.5

24.8

25

27.4

28

28.3

28.6

28.8

30

30.3

31.6

32.6

33.3

34.8

35.7

36.1

36.3

36.4

40

41.1

41.4

41.7

47.3

50

72.5
ClearTrống
type
- E-GAUS
- E-GAUU
- E-GAWF
- E-GAWS
- E-GAWU
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

4 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Tension Spring Light to Medium Load / Medium Load / Medium to Heavy Load [RoHS Compliant]

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

Brand :

MiSUMi Economy

Part Number :

E-GAUS3-10

E-GAUS3-15

E-GAUS3-20

E-GAUS4-15

E-GAUS4-20

E-GAUS4-25

E-GAUS4-30

E-GAUS4-40

E-GAUS5-15

E-GAUS5-20

E-GAUS5-25

E-GAUS5-30

E-GAUS5-35

E-GAUS5-40

E-GAUS6-20

E-GAUS6-25

E-GAUS6-30

E-GAUS6-35

E-GAUS6-40

E-GAUS6-45

E-GAUS3-10

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

This product can be purchased in quantities of 10 pcs. Please enter your order quantity in multiples of 10. * Minimum order quantity (20 pcs. or more)
Stainless Steel Spring is magnetic.
If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
The price list on this page is as of March 2024. For the latest price, please click the "Confirm Price" button after confirming the part number.

Product Description

＼RoHS10-compliant products are newly released. / The bulk-purchase may save up to 80% for MISUMI’s similar products.
MISUMI's low-priced new brand [Economy Series] Sequentially expanding product lineup. See "Product Lineup" for the special feature page. Product Lineup

Product Overview

■Product comparison information
♢ Economy series tension springs are manufactured overseas, resulting in significant cost reductions.
♢ Economy series tension springs are standardized to maintain the maximum load constantly to the same diameter. Initial tension and spring constant are for reference only.
♢ E-GAU□ is a stainless steel spring, but it is magnetic. Please be careful.

Item	MISUMI's Similar Products AUS	Economy Series E-GAUS
Service Life	1 million times	700,000 times or more
Manufactured	In Japan	Outside of Japan
RoHS10	Compliant	Compliant

Dimensional Drawing

Free Length L
D= 18 or less ±1.0
D= 18 or more ±1.5

Type	[M] Material
E-GAWU	SWP-B
E-GAWS
E-GAWF
E-GAUU	SUS304-WPB
E-GAUS	SUS304-WPB

Specification Table

■Light Medium Load Type

Part Number			Wire Dia. d mm	Dynamic Load		Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
Type	D	L	Wire Dia. d mm	Max. Deflection Fmax.mm	Max. Load N	Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
E－GAWU (SWP-B) E－GAUU (SUS304－WPB)	2	^*10	0.28	4.0	2.45	0.49	0.49
	2	^*15	0.28	6.7	2.45	0.49	0.29
	3	10	0.35	4.6	3.33	0.66	0.59
		15		9.1			0.29
		25		19.5			0.14
	4	15	0.45	7.5	4.81	0.98	0.51
		20		12.2			0.31
		25		16.9			0.23
		30		21.7			0.18
		40		30.0			0.13
	5	15	0.55	5.7	6.37	1.37	0.89
		20		9.8			0.51
		25		14.2			0.35
		30		18.9			0.26
		40		28.3			0.18
		50		36.4			0.14
	6	20	0.7	9.6	12.94	1.67	1.18
		25		14.4			0.78
		30		20.2			0.56
		35		28.8			0.39
		40		30.3			0.37
		45		34.8			0.32
		50		41.1			0.27
		(60)		50.0			0.23
	8	(25)	0.9	10.0	18.63	3.92	1.47
		(30)		14.3			1.03
		35		18.8			0.78
		40		23.8			0.62
		(45)		28.3			0.52
		50		32.6			0.45
		60		41.7			0.35
		(70)		50.0			0.29
	10	(35)	1.10	14.0	23.24	4.71	1.32
		60		35.7			0.52
		(75)		47.3			0.39
	12	^*35	1.40	11.7	47.7	10.49	3.14
	12	^*70	1.40	41.4	47.7	10.49	0.88

[ ! ] () can only be selected for E-GAWU.
[ ! ] * can only be selected for E-GAUU.
[ ! ] Load {kgf} = Load N × 0.101972
[!] Initial tension, spring constant, and number of coils are for reference only. There may be some variations depending on the lot.
" ! " How to Determine the Number of Winding (Reference Value): Total Coils = [L - 2(D - d)]/d
" ! " How to Determine the Active Number of Winding (Reference Value): Number of active coils = total coils - 2

■Medium Load Type

Part Number			Wire Dia. d mm	Dynamic Load		Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
Type	D	L	Wire Dia. d mm	Max. Deflection Fmax.mm	Max. Load N	Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
E－GAWS (SWP-B) E－GAUS (SUS304－WPB)	3	10	0.4	3.5	4.41	0.88	0.98
		15		6.0			0.59
		20		9.0			0.39
	4	15	0.5	6.5	6.37	1.18	0.78
		20		10.2			0.49
		25		13.9			0.39
		30		17.5			0.29
		40		24.0			0.22
	5	15	0.6	5.6	8.53	1.57	1.27
		20		8.9			0.78
		25		13.7			0.49
		30		17.3			0.39
		35		23.7			0.29
		40		24.5			0.28
	6	20	0.8	6.7	17.26	3.53	2.06
		25		9.3			1.47
		30		12.7			1.08
		35		15.6			0.88
		40		18.7			0.69
		45		20.6			0.68
		(50)		24.5			0.57
		55		28.0			0.50
	8	25	1.0	9.1	24.52	4.90	2.16
		30		12.5			1.57
		35		15.4			1.27
		40		19.2			0.98
		45		22.2			0.88
		50		25.0			0.78
		55		28.6			0.70
		60		33.3			0.60
		65		36.3			0.55
		(70)		40.0			0.50
	10	30	1.2	10.4	30.99	5.49	2.45
		35		13.7			1.86
		40		17.3			1.47
		(45)		20.0			1.27
		(50)		24.8			0.98
		60		31.6			0.78
	12	(40)	1.6	11.8	62.76	14.71	5.69
		(55)		19.3			2.94
		(60)		22.3			2.75
	14	(40)	1.8	10.2	74.53	16.67	5.69
	20	(100)	2.6	36.1	150.04	36.28	3.14
	20	(175)	2.6	72.5	150.04	36.28	1.60

[ ! ] () can only be selected for E-GAWS.
[ ! ] Load {kgf} = Load N × 0.101972
[!] Initial tension, spring constant, and number of coils are for reference only. There may be some variations depending on the lot.
" ! " How to Determine the Number of Winding (Reference Value): Total Coils = [L - 2(D - d)]/d
" ! " How to Determine the Active Number of Winding (Reference Value): Number of active coils = total coils - 2

■Medium Heavy Load Type

Part Number			Wire Dia. d mm	Dynamic Load		Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
Type	D	L	Wire Dia. d mm	Max. Deflection Fmax.mm	Max. Load N	Initial Tension N (Reference Value)	Spring Constant N/mm (Reference Value)
E－GAWF (SWP-B)	3	10	0.45	2.2	6.47	1.57	2.26
		15		4.5			1.08
		20		6.7			0.74
	4	15	0.55	4.5	8.43	1.86	1.47
		20		7.1			0.93
		25		10.0			0.66
		35		15.2			0.43
	5	15	0.7	3.9	14.71	2.45	3.14
		20		6.9			1.77
		25		9.6			1.28
		30		12.5			0.98
		35		15.6			0.78
		40		19.2			0.64
	6	20	0.9	3.9	23.54	5.88	4.51
		25		6.0			2.94
		30		7.8			2.26
		35		10.0			1.77
		40		12.0			1.47
		50		16.4			1.08
	8	25	1.1	5.8	31.38	6.86	4.23
		30		8.3			2.94
		35		10.9			2.26
		40		13.2			1.86
		45		15.6			1.57
	10	30	1.4	6.5	49.03	12.75	5.58
		35		8.7			4.17
		40		10.7			3.39
		45		12.9			2.81
		50		15.2			2.39
		70		23.1			1.57
		80		27.4			1.32

[ ! ] Load {kgf} = Load N × 0.101972
[!] Initial tension, spring constant, and number of coils are for reference only. There may be some variations depending on the lot.
" ! " How to Determine the Number of Winding (Reference Value): Total Coils = [L - 2(D - d)]/d
" ! " How to Determine the Active Number of Winding (Reference Value): Number of active coils = total coils - 2

■Max. Load N

O.D.	E-GAWA	E-GAWY	E-GAWU	E-GAWS	E-GAWF	E-GAWT	E-GWAWT
D	E-GAUA	E-GAUY	E-GAUU	E-GAUS		E-GAUT
2	0.69	1.86	2.45
3	1.27	2.25	3.33	4.41	6.47	8.80
4	2.26	3.24	4.81	6.37	8.43	11.10
5	3.24	4.22	6.37	8.53	14.71	20.79	20.79
6	6.08	8.14	12.94	17.26	23.54	33.15	33.15
8	8.53	12.75	18.63	24.52	31.38	41.19	41.19
10		15.00	23.24	30.99	49.03	77.47	77.47
12		31.37	47.7	62.76		120.62	120.62
14		38.24		74.53		154.95	154.95
16		43.15
20		78.45		150.04
For the product page, see here →	Extra Light Load / Light Load Type		Light Medium Load / Medium Load / Medium Heavy Load Type			Heavy Load Type	Heavy Load Double Hook Type

Note

[Cautions for Use]
▶Operating Temperature
SWP-B:: Ambient Temperature (0 to 40°C)
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
* If this product is to be used in environments with extreme temperature difference or humidity such as outdoors, stainless steel is recommended.

▶Standard Usage Count: Approximately 700,000 times
* The above numbers are for reference only. The usage count may vary depending on the direction of tension, operating temperature/environment, and deformation amount.
It is recommended to use the springs within 70 % of allowable deflection F max.(mm).

▶Others
· Use the springs within the range of the allowable deflection F max.(mm). Using at higher than the allowable deflection values may cause deformation or failure.
Also, do not extend tension springs more than its allowable deflection during the installation.
· Stainless Steel Spring is magnetic. Please be careful.

Combination Table of Tension Spring and Post for Tension Spring

Please use this as a reference for combining extension spring and post for tension spring.
The following is a reference for combinations. Please check the strength of post for tension spring depending on the usage conditions.
　◎ = Recommended
　○= Available but difficult to pass through
× = Unavailable

[Economy Series]Tension Spring - Light Medium Load Type

Unit (mm)
Type	Tension Spring D Dimension	Posts for Tension Springs D Dim.	Economy Series Post for Tension Spring
			Hole	Groove Type
			C-AIPO	C-BSPO
E-GAWU E-GAUU	3	3	◎	×
	4	4	◎	○
	5	4	◎	◎
	5	5	◎	×
	6	4	◎	◎
		5	◎	×
		6	◎	×
	8	5	◎	◎
	8	6	◎	◎

[Economy Series]Tension Spring - Medium Load Type

Unit (mm)
Type	Tension Spring D Dimension	Posts for Tension Springs D Dim.	Economy Series Post for Tension Spring
			Hole	Groove Type
			C-AIPO	C-BSPO
E-GAWS E-GAUS	3	3	◎	○
	4	4	◎	×
	5	4	◎	◎
	5	5	◎	×
	6	4	◎	◎
	6	5	◎	×
	8	6	◎	◎
	10	6	◎	◎
	10	8	◎	×
	12	6	◎	○
	12	8	○	◎
	14	8	○	◎
	14	12	—
	20	14	—

[Economy Series]Tension Spring - Medium Heavy Load Type

Unit (mm)
Type	Tension Spring D Dimension	Posts for Tension Springs D Dim.	Economy Series Post for Tension Spring
			Hole	Groove Type
			C-AIPO	C-BSPO
E-GAWF	3	3	◎	×
	4	3	◎	×
	4	4	○	×
	5	4	◎	×
	5	5	◎	×
	6	4	◎	◎
		5	◎	×
		6	◎	×
	8	5	◎	◎
	8	6	◎	◎
	10	6	◎	◎
	10	8	◎	×

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-GAUS3-10
E-GAUS3-15
E-GAUS3-20
E-GAUS4-15
E-GAUS4-20
E-GAUS4-25
E-GAUS4-30
E-GAUS4-40
E-GAUS5-15
E-GAUS5-20
E-GAUS5-25
E-GAUS5-30
E-GAUS5-35
E-GAUS5-40
E-GAUS6-20
E-GAUS6-25
E-GAUS6-30
E-GAUS6-35
E-GAUS6-40
E-GAUS6-45
E-GAUS6-55
E-GAUS8-25
E-GAUS8-30
E-GAUS8-35
E-GAUS8-40
E-GAUS8-45
E-GAUS8-50
E-GAUS8-55
E-GAUS8-60
E-GAUS8-65
E-GAUS10-30
E-GAUS10-35
E-GAUS10-40
E-GAUS10-60
E-GAUU2-10
E-GAUU2-15
E-GAUU3-10
E-GAUU3-15
E-GAUU3-25
E-GAUU4-15
E-GAUU4-20
E-GAUU4-25
E-GAUU4-30
E-GAUU4-40
E-GAUU5-15
E-GAUU5-20
E-GAUU5-25
E-GAUU5-30
E-GAUU5-40
E-GAUU5-50
E-GAUU6-20
E-GAUU6-25
E-GAUU6-30
E-GAUU6-35
E-GAUU6-40
E-GAUU6-45
E-GAUU6-50
E-GAUU8-35
E-GAUU8-40
E-GAUU8-50

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Free Length L (mm)	Outer Dia. D (Ø)	Allowable Load (Configurable Range) (N)	Wire Dia. (Ø)	Material	Length of Spring Used L+F (mm)	Standard Spring Constant (N/mm)	Max. Load (N)	Initial Tension (N)	Max. Deflection (mm)	Material Certificate: Material
13,225 VND	20 Piece(s)	Available	4 Day(s) or more	10	3	3.51~8.00	0.4	-	13.5	0.98	4.41	0.88	3.5	SUS304-WPB
12,303 VND	20 Piece(s)	Available	4 Day(s) or more	15	3	3.51~8.00	0.4	-	21	0.59	4.41	0.88	6	SUS304-WPB
12,312 VND	20 Piece(s)	Available	4 Day(s) or more	20	3	3.51~8.00	0.4	-	29	0.39	4.41	0.88	9	SUS304-WPB
13,456 VND	20 Piece(s)	Available	4 Day(s) or more	15	-	3.51~8.00	0.5	-	21.5	0.78	6.37	1.18	6.5	SUS304-WPB
13,829 VND	20 Piece(s)	Available	4 Day(s) or more	20	-	3.51~8.00	0.5	-	-	0.49	6.37	1.18	10.2	SUS304-WPB
14,058 VND	20 Piece(s)	Available	4 Day(s) or more	25	-	3.51~8.00	0.5	-	38.9	0.39	6.37	1.18	13.9	SUS304-WPB
15,791 VND	20 Piece(s)	Available	4 Day(s) or more	30	-	3.51~8.00	0.5	-	47.5	0.29	6.37	1.18	17.5	SUS304-WPB
16,536 VND	20 Piece(s)	Available	4 Day(s) or more	40	-	3.51~8.00	0.5	-	64	-	6.37	1.18	24	SUS304-WPB
11,960 VND	20 Piece(s)	Available	4 Day(s) or more	15	5	8.01~15.00	0.6	-	20.6	1.27	8.53	1.57	5.6	SUS304-WPB
12,339 VND	20 Piece(s)	Available	4 Day(s) or more	20	5	8.01~15.00	0.6	-	28.9	0.78	8.53	1.57	8.9	SUS304-WPB
12,791 VND	20 Piece(s)	Available	4 Day(s) or more	25	5	8.01~15.00	0.6	-	38.7	0.49	8.53	1.57	13.7	SUS304-WPB
13,529 VND	20 Piece(s)	Available	4 Day(s) or more	30	5	8.01~15.00	0.6	-	47.3	0.39	8.53	1.57	17.3	SUS304-WPB
16,128 VND	20 Piece(s)	Available	4 Day(s) or more	35	5	8.01~15.00	0.6	-	58.7	0.29	8.53	1.57	23.7	SUS304-WPB
17,153 VND	20 Piece(s)	Available	4 Day(s) or more	40	5	8.01~15.00	0.6	-	64.5	-	8.53	1.57	24.5	SUS304-WPB
11,432 VND	20 Piece(s)	Available	4 Day(s) or more	20	6	15.01~30.00	0.8	-	26.7	2.06	17.26	3.53	6.7	SUS304-WPB
11,753 VND	20 Piece(s)	Available	4 Day(s) or more	25	6	15.01~30.00	0.8	-	34.3	1.47	17.26	3.53	9.3	SUS304-WPB
13,578 VND	20 Piece(s)	Available	4 Day(s) or more	30	6	15.01~30.00	0.8	-	42.7	1.08	17.26	3.53	12.7	SUS304-WPB
16,762 VND	20 Piece(s)	Available	4 Day(s) or more	35	6	15.01~30.00	0.8	-	50.6	0.88	17.26	3.53	15.6	SUS304-WPB
17,227 VND	20 Piece(s)	Available	4 Day(s) or more	40	6	15.01~30.00	0.8	-	58.7	0.69	17.26	3.53	18.7	SUS304-WPB
18,192 VND	20 Piece(s)	Available	4 Day(s) or more	45	6	15.01~30.00	0.8	-	65.6	0.68	17.26	3.53	20.6	SUS304-WPB
26,466 VND	20 Piece(s)	Available	4 Day(s) or more	55	6	15.01~30.00	0.8	-	83	0.5	17.26	3.53	28	SUS304-WPB
14,870 VND	20 Piece(s)	Available	4 Day(s) or more	25	8	15.01~30.00	1	-	34.1	2.16	-	4.9	9.1	SUS304-WPB
15,716 VND	20 Piece(s)	Available	4 Day(s) or more	30	8	15.01~30.00	1	-	42.5	1.57	-	4.9	12.5	SUS304-WPB
16,562 VND	20 Piece(s)	Available	4 Day(s) or more	35	8	15.01~30.00	1	-	50.4	1.27	-	4.9	15.4	SUS304-WPB
17,766 VND	20 Piece(s)	Available	4 Day(s) or more	40	8	15.01~30.00	1	-	59.2	0.98	-	4.9	19.2	SUS304-WPB
18,541 VND	20 Piece(s)	Available	4 Day(s) or more	45	8	15.01~30.00	1	-	67.2	0.88	-	4.9	22.2	SUS304-WPB
26,445 VND	20 Piece(s)	Available	4 Day(s) or more	50	8	15.01~30.00	1	-	-	0.78	-	4.9	25	SUS304-WPB
27,506 VND	20 Piece(s)	Available	4 Day(s) or more	55	8	15.01~30.00	1	-	83.6	0.7	-	4.9	28.6	SUS304-WPB
27,922 VND	20 Piece(s)	Available	4 Day(s) or more	65	8	15.01~30.00	1	-	93.3	0.6	-	4.9	33.3	SUS304-WPB
31,632 VND	20 Piece(s)	Available	4 Day(s) or more	65	8	15.01~30.00	1	-	101.3	0.55	-	4.9	36.3	SUS304-WPB
18,918 VND	20 Piece(s)	Available	4 Day(s) or more	30	10	30.01~60.00	1.2	-	40.4	2.45	30.99	5.49	10.4	SUS304-WPB
17,359 VND	20 Piece(s)	Available	4 Day(s) or more	35	10	30.01~60.00	1.2	-	48.7	1.86	30.99	5.49	13.7	SUS304-WPB
17,877 VND	20 Piece(s)	Available	4 Day(s) or more	40	10	30.01~60.00	1.2	-	57.3	1.47	30.99	5.49	17.3	SUS304-WPB
30,658 VND	20 Piece(s)	Available	4 Day(s) or more	60	10	30.01~60.00	1.2	-	-	0.78	30.99	5.49	31.6	SUS304-WPB
13,078 VND	20 Piece(s)	Available	4 Day(s) or more	10	2	1.26~3.50	0.28	-	14	0.49	2.45	0.49	4	SUS304-WPB
16,876 VND	20 Piece(s)	Available	4 Day(s) or more	15	2	1.26~3.50	0.28	-	21.7	0.29	2.45	0.49	6.7	SUS304-WPB
11,005 VND	20 Piece(s)	Available	4 Day(s) or more	10	3	1.26~3.50	-	-	14.6	0.59	-	0.66	4.6	SUS304-WPB
12,301 VND	20 Piece(s)	Available	4 Day(s) or more	15	3	1.26~3.50	-	-	24.1	0.29	-	0.66	9.1	SUS304-WPB
15,323 VND	20 Piece(s)	Available	4 Day(s) or more	25	3	1.26~3.50	-	-	-	0.14	-	0.66	19.5	SUS304-WPB
11,950 VND	20 Piece(s)	Available	4 Day(s) or more	15	-	3.51~8.00	0.45	-	22.5	0.51	4.81	0.98	7.5	SUS304-WPB
13,968 VND	20 Piece(s)	Available	4 Day(s) or more	20	-	3.51~8.00	0.45	-	32.2	0.31	4.81	0.98	12.2	SUS304-WPB
12,550 VND	20 Piece(s)	Available	4 Day(s) or more	25	-	3.51~8.00	0.45	-	41.9	0.23	4.81	0.98	16.9	SUS304-WPB
16,071 VND	20 Piece(s)	Available	4 Day(s) or more	30	-	3.51~8.00	0.45	-	51.7	0.18	4.81	0.98	21.7	SUS304-WPB
18,388 VND	20 Piece(s)	Available	4 Day(s) or more	40	-	3.51~8.00	0.45	-	-	0.13	4.81	0.98	30	SUS304-WPB
11,956 VND	20 Piece(s)	Available	4 Day(s) or more	15	5	3.51~8.00	-	-	20.7	0.89	6.37	1.37	5.7	SUS304-WPB
12,334 VND	20 Piece(s)	Available	4 Day(s) or more	20	5	3.51~8.00	-	-	29.8	0.51	6.37	1.37	9.8	SUS304-WPB
13,859 VND	20 Piece(s)	Available	4 Day(s) or more	25	5	3.51~8.00	-	-	39.2	-	6.37	1.37	14.2	SUS304-WPB
15,812 VND	20 Piece(s)	Available	4 Day(s) or more	30	5	3.51~8.00	-	-	48.9	0.26	6.37	1.37	18.9	SUS304-WPB
16,712 VND	20 Piece(s)	Available	4 Day(s) or more	40	5	3.51~8.00	-	-	68.3	0.18	6.37	1.37	28.3	SUS304-WPB
18,113 VND	20 Piece(s)	Available	4 Day(s) or more	50	5	3.51~8.00	-	-	86.4	0.14	6.37	1.37	36.4	SUS304-WPB
12,209 VND	20 Piece(s)	Available	4 Day(s) or more	20	6	8.01~15.00	0.7	-	29.6	1.18	12.94	1.67	9.6	SUS304-WPB
12,812 VND	20 Piece(s)	Available	4 Day(s) or more	25	6	8.01~15.00	0.7	-	39.4	0.78	12.94	1.67	14.4	SUS304-WPB
13,774 VND	20 Piece(s)	Available	4 Day(s) or more	30	6	8.01~15.00	0.7	-	50.2	0.56	12.94	1.67	20.2	SUS304-WPB
16,740 VND	20 Piece(s)	Available	4 Day(s) or more	35	6	8.01~15.00	0.7	-	63.8	0.39	12.94	1.67	28.8	SUS304-WPB
17,630 VND	20 Piece(s)	Available	4 Day(s) or more	40	6	8.01~15.00	0.7	-	-	0.37	12.94	1.67	30.3	SUS304-WPB
15,513 VND	20 Piece(s)	Available	4 Day(s) or more	45	6	8.01~15.00	0.7	-	79.8	0.32	12.94	1.67	34.8	SUS304-WPB
26,469 VND	20 Piece(s)	Available	4 Day(s) or more	50	6	8.01~15.00	0.7	-	91.1	0.27	12.94	1.67	41.1	SUS304-WPB
14,673 VND	20 Piece(s)	Available	4 Day(s) or more	35	8	15.01~30.00	0.9	-	53.8	0.78	-	3.92	18.8	SUS304-WPB
17,662 VND	20 Piece(s)	Available	4 Day(s) or more	40	8	15.01~30.00	0.9	-	63.8	0.62	-	3.92	23.8	SUS304-WPB
27,405 VND	20 Piece(s)	Available	4 Day(s) or more	50	8	15.01~30.00	0.9	-	82.6	-	-	3.92	32.6	SUS304-WPB

Loading...Tải…

Basic InformationThông tin cơ bản

Material Certificate	Available

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Free Length L(mm)

Outer Dia. D(Ø)

Allowable Load (Configurable Range)(N)

Wire Dia.(Ø)

Material

Length of Spring Used L+F(mm)

Standard Spring Constant(N/mm)

Max. Load(N)

Initial Tension(N)

Max. Deflection(mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Tension Spring Light to Medium Load / Medium Load / Medium to Heavy Load [RoHS Compliant]

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Product Overview

Part Number

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng