How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(30 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LBHG12-15

Inscribed Circle Dia. dr Overall Length L Ball Recirculating Type Length Height H type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
12

16

20

25

30
ClearTrống
Overall Length L(mm)
40

47

52

69

70

74

84

94

128

138
ClearTrống
Ball Recirculating Type
- Single
- Double
ClearTrống
Length
- Single
- Double
ClearTrống
Height H(mm)
15

20

25

30

40

50
ClearTrống
type
- E-LBHG
- E-LBHGW
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

12 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Bushing Housing Units-Shaft Sliding, Single / Double

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Part Number :

E-LBHG12-15

E-LBHG12-20

E-LBHG12-25

E-LBHG16-20

E-LBHG16-25

E-LBHG16-30

E-LBHG20-20

E-LBHG20-25

E-LBHG20-30

E-LBHG25-25

E-LBHG25-30

E-LBHG25-40

E-LBHG30-30

E-LBHG30-40

E-LBHG30-50

E-LBHGW12-15

E-LBHGW12-20

E-LBHGW12-25

E-LBHGW16-20

E-LBHGW16-25

E-LBHG12-15

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview of Linear Bushings

The housing unit type is a linear motion guiding mechanism matched with linear shaft, which has built-in Linear Bushings in the aluminum alloy case.

Linear Bushings Resin retainers are available in black and yellow, with the same performance. Please feel free to use.

Product Features of Linear Bushings

Feature 1: Linear Bushings Height is selectable, eliminating the need to use leveling mounts for height adjustment, which can decrease the number of parts and reduce the cost.
Feature 2: Good interchangeability. Built-in Linear Bushings have good interchangeability because they can be used with shafts randomly.
Feature 3: It can be easily fixed from top using bolts, suitable for mechanisms that drive the guide shaft to slide.
Feature 4: Appropriate specifications can be selected according to the conditions of use.
Feature 5: Linear Bushings Reduced number of parts and machining time.

Dimensional Drawing of Linear Bushings

Housing of Linear Bushings		Ambient Operating Temp
Material of Linear Bushings	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

Specification Table of Linear Bushings

Part Number of Linear Bushings		H Selection						L	H₁	T		T₁		S	W	C	C₁	L₁	d
Type of Linear Bushings	dr	H Selection						L	H₁	Single	Double	Single	Double	S	W	C	C₁	L₁	d
E-LBHG (Single Type) E-LBHGW (Double Type)	12	15	20	25				58	H+15	40	70	25	50	8	30	8.5	(0.5)	46	5.5
	16		20	25	30			68	H+20	47	84	30	55	10	40	11.5		56
	20		20	25	30			72	H+22	52	94	35	60	12	44	12.5		60
	25			25	30	40		90	H+27.5	69	128	50	90	15	55	16		75	6.6
	30				30	40	50	105	H+32.5	74	138	55	100	20	65	18		85	9

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LBHG12-15
E-LBHG12-20
E-LBHG12-25
E-LBHG16-20
E-LBHG16-25
E-LBHG16-30
E-LBHG20-20
E-LBHG20-25
E-LBHG20-30
E-LBHG25-25
E-LBHG25-30
E-LBHG25-40
E-LBHG30-30
E-LBHG30-40
E-LBHG30-50
E-LBHGW12-15
E-LBHGW12-20
E-LBHGW12-25
E-LBHGW16-20
E-LBHGW16-25
E-LBHGW16-30
E-LBHGW20-20
E-LBHGW20-25
E-LBHGW20-30
E-LBHGW25-25
E-LBHGW25-30
E-LBHGW25-40
E-LBHGW30-30
E-LBHGW30-40
E-LBHGW30-50

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Ball Recirculating Type	Length	Height H (mm)
177,771 VND	1 Piece(s)	Available	Same day	12	40	Single	Single	15
198,559 VND	1 Piece(s)	Available	12 Day(s)	12	40	Single	Single	20
205,501 VND	1 Piece(s)	Available	Same day	12	40	Single	Single	25
215,955 VND	1 Piece(s)	Available	Same day	16	47	Single	Single	20
247,989 VND	1 Piece(s)	Available	12 Day(s)	16	47	Single	Single	25
256,475 VND	1 Piece(s)	Available	Same day	16	47	Single	Single	30
244,168 VND	1 Piece(s)	Available	Same day	20	52	Single	Single	20
264,203 VND	1 Piece(s)	Available	12 Day(s)	20	52	Single	Single	25
281,160 VND	1 Piece(s)	Available	Same day	20	52	Single	Single	30
316,042 VND	1 Piece(s)	Available	Same day	25	69	Single	Single	25
349,945 VND	1 Piece(s)	Available	12 Day(s)	25	69	Single	Single	30
366,975 VND	1 Piece(s)	Available	12 Day(s)	25	69	Single	Single	40
393,228 VND	1 Piece(s)	Available	12 Day(s)	30	74	Single	Single	30
426,443 VND	1 Piece(s)	Available	12 Day(s)	30	74	Single	Single	40
445,809 VND	1 Piece(s)	Available	12 Day(s)	30	74	Single	Single	50
342,595 VND	1 Piece(s)	Available	Same day	12	70	Double	Double	15
364,165 VND	1 Piece(s)	Available	12 Day(s)	12	70	Double	Double	20
374,199 VND	1 Piece(s)	Available	12 Day(s)	12	70	Double	Double	25
405,104 VND	1 Piece(s)	Available	12 Day(s)	16	84	Double	Double	20
439,002 VND	1 Piece(s)	Available	Same day	16	84	Double	Double	25
466,747 VND	1 Piece(s)	Available	Same day	16	84	Double	Double	30
437,522 VND	1 Piece(s)	Available	Same day	20	94	Double	Double	20
468,354 VND	1 Piece(s)	Available	12 Day(s)	20	94	Double	Double	25
496,109 VND	1 Piece(s)	Available	Same day	20	94	Double	Double	30
590,479 VND	1 Piece(s)	Available	12 Day(s)	25	128	Double	Double	25
621,347 VND	1 Piece(s)	Available	12 Day(s)	25	128	Double	Double	30
660,007 VND	1 Piece(s)	Available	12 Day(s)	25	128	Double	Double	40
729,450 VND	1 Piece(s)	Available	12 Day(s)	30	138	Double	Double	30
768,161 VND	1 Piece(s)	Available	12 Day(s)	30	138	Double	Double	40
791,470 VND	1 Piece(s)	Available	12 Day(s)	30	138	Double	Double	50

Loading...Tải…

Dimensional Drawing

Specification Table

Part Number		H Selection						L	H₁	T		T₁		S	W	C	C₁	L₁	d
Type	dr	H Selection						L	H₁	Single	Double	Single	Double	S	W	C	C₁	L₁	d
E-LBHG (Single Type) E-LBHGW (Double Type)	12	15	20	25				58	H+15	40	70	25	50	8	30	8.5	(0.5)	46	5.5
	16		20	25	30			68	H+20	47	84	30	55	10	40	11.5		56
	20		20	25	30			72	H+22	52	94	35	60	12	44	12.5		60
	25			25	30	40		90	H+27.5	69	128	50	90	15	55	16		75	6.6
	30				30	40	50	105	H+32.5	74	138	55	100	20	65	18		85	9

dr	Basic Load Rating				Allowable Static Torque (N·m)		Mass (g)
	C (Dynamic) N		Co (Static) N		Allowable Static Torque (N·m)		Single	Double
	Single	Double	Single	Double	Single	Double	Single	Double
12	412	657	598	1200	-	10.9	41	80
16	775	1230	1180	2350	-	19.7	73	145
20	882	1400	1370	2740	-	26.8	98	180
25	980	1560	1570	3140	-	43.4	236	440
30	1570	2490	2740	5490	-	82.8	262	480

Reference surface is the inner side of the model label pasting surface.

Material Specification

Housing		Ambient Operating Temp
Material	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

Precautions

■ When the linear bushing is subjected to large moment load (eccentric load), one piece of single type is not applicable, so it is recommended to use one piece of double type or multiple pieces of single type.
■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bushing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bushing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bushing is recommended to be installed on the holder with H7 tolerance. The linear bushing is in clearance fit with the housing.

Basic InformationThông tin cơ bản

Type	Housing	Style	Standard	Types	Shaft-sliding Linear Bushing Housing Unit

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Electronic & Electrical	Automotive	Lithium battery

LCD	Smart Phones	Semiconductor

Economy series Linear Bushing Box-Type Blocks, Wide Square, Single, Medium		Economy series Linear Bushing Box-Type Blocks, Wide Double, Medium Long, Long		Linear Bushings Straight Single / Double

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Ball Recirculating Type

Length

Height H(mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Bushing Housing Units-Shaft Sliding, Single / Double

Copy Part Number URL to Clipboard

Product Overview of Linear Bushings

Product Features of Linear Bushings

Dimensional Drawing of Linear Bushings

Specification Table of Linear Bushings

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều