How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(48 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LBFP6LUU

Inscribed Circle Dia. dr Overall Length L Outer Sleeve Material Outer Sleeve Surface Treatment Outer Dia. D Accuracy Ball Recirculating Type Length Eccentricity CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
6

8

10

12

13

16

20

25

30

35

40

50
ClearTrống
Overall Length L(mm)
19

24

29

30

32

35

37

42

45

55

57

59

61

64

70

80

100

112

123

135

151

192
ClearTrống
Outer Sleeve Material
- Steel
  - SUJ2 Equivalent
  - SUJ2 Equivalent
ClearTrống
Outer Sleeve Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
  - Electroless nickel plating
ClearTrống
Outer Dia. D(Ø)
12

15

19

21

23

28

32

40

45

52

60

80
ClearTrống
Accuracy
- Standard Grade
- High Grade
ClearTrống
Ball Recirculating Type
- Single
- Double
ClearTrống
Length
- Single
- Double
ClearTrống
Eccentricity(µm)
24

30

40

50
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Round Flanged Linear Bushings With Pilot, Single / Double

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Part Number :

E-LBFP6LUU

E-LBFP6UU

E-LBFP8LUU

E-LBFP8UU

E-LBFP10LUU

E-LBFP10UU

E-LBFP12LUU

E-LBFP12UU

E-LBFP13LUU

E-LBFP13UU

E-LBFP16LUU

E-LBFP16UU

E-LBFP20LUU

E-LBFP20UU

E-LBFP25LUU

E-LBFP25UU

E-LBFP30LUU

E-LBFP30UU

E-LBFP35LUU

E-LBFP35UU

E-LBFP6LUU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Economy Round Flanged Linear Bushing with Pilot

Space-Saving Efficiency Cost-Effective

- Space-saving round flanged design for compact mechanisms.

- Supports a range of shaft diameters

- Effective utilization of space, suitable for small mechanism designs.

- High efficiency with low friction resistance.

- More cost-effective than standard linear guides.

Economy Round Flanged Linear Bushing with Pilot

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Linear Bushings

The flanged Linear Bushings, linear bearing integrates the linear bearing with the support, which is compact in structure and easy to assemble to the mechanism accurately and simply.
The embedded flanged linear bearing does not extend to the opposite side of the mounting surface, so there is sufficient space on the opposite side of the mounting surface.

Product Features of Linear Bushings

Linear Bushings, Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft. Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Linear Bushings Feature 1: Effective utilization of space. The combination of the guide shaft and the linear bearing enables effective use of space, suitable for small mechanism designs.
Linear Bushings Feature 2: Selection can be made based on operating environment. The outer cylinder of the linear bearing is made of steel or stainless steel, and the retainer is made of stainless steel for harsh conditions or resin for low noise.
Linear Bushings Feature 3: Good interchangeability. Linear bearings have good interchangeability because they can be used with shafts randomly.
Linear Bushings Feature 4: Appropriate specifications can be selected according to the conditions of use.
Linear Bushings Feature 5: More cost effective than the linear guide.

Dimensional Drawing of Linear Bushings

When this product of Linear Bushings is initially delivered, its color may be partially inconsistent with the photo, in which case the actual product shall prevail, without prior notice.

Specifications Overview of Linear Bushings

■Material Specification Table of Linear Bushings

Ball Retainer	Type	Housing			Ball	Retainer	Ambinent Operating Temperature	Accessories：Seal Ring
		Material	Hardness	Surface Treatment	Material	Material		Material
Single	E－LBFP□□UU	Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	－20～80℃	Nitrile Rubber (-20 to 120℃)
Double	E－LBFP□□LUU
Single	E－LBFPM□□UU			Electroless Nickel Plating
Double	E－LBFPM□□LUU

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LBFP6LUU
E-LBFP6UU
E-LBFP8LUU
E-LBFP8UU
E-LBFP10LUU
E-LBFP10UU
E-LBFP12LUU
E-LBFP12UU
E-LBFP13LUU
E-LBFP13UU
E-LBFP16LUU
E-LBFP16UU
E-LBFP20LUU
E-LBFP20UU
E-LBFP25LUU
E-LBFP25UU
E-LBFP30LUU
E-LBFP30UU
E-LBFP35LUU
E-LBFP35UU
E-LBFP40LUU
E-LBFP40UU
E-LBFP50LUU
E-LBFP50UU
E-LBFPM6LUU
E-LBFPM6UU
E-LBFPM8LUU
E-LBFPM8UU
E-LBFPM10LUU
E-LBFPM10UU
E-LBFPM12LUU
E-LBFPM12UU
E-LBFPM13LUU
E-LBFPM13UU
E-LBFPM16LUU
E-LBFPM16UU
E-LBFPM20LUU
E-LBFPM20UU
E-LBFPM25LUU
E-LBFPM25UU
E-LBFPM30LUU
E-LBFPM30UU
E-LBFPM35LUU
E-LBFPM35UU
E-LBFPM40LUU
E-LBFPM40UU
E-LBFPM50LUU
E-LBFPM50UU

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Sleeve Material	Outer Sleeve Surface Treatment	Outer Dia. D (Ø)	Accuracy	Ball Recirculating Type	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)
116,298 VND	1 Piece(s)	Available	Same day	6	35	[Steel] SUJ2 Equivalent	No Surface Treatment	12	High Grade	Double	Double	30	324	529
73,109 VND	1 Piece(s)	Available	Same day	6	19	[Steel] SUJ2 Equivalent	No Surface Treatment	12	High Grade	Single	Single	24	206	265
117,144 VND	1 Piece(s)	Available	Same day	8	45	[Steel] SUJ2 Equivalent	No Surface Treatment	15	High Grade	Double	Double	30	431	784
73,470 VND	1 Piece(s)	Available	Same day	8	24	[Steel] SUJ2 Equivalent	No Surface Treatment	15	High Grade	Single	Single	24	265	380
123,883 VND	1 Piece(s)	Available	Same day	10	55	[Steel] SUJ2 Equivalent	No Surface Treatment	19	High Grade	Double	Double	30	588	1100
79,022 VND	1 Piece(s)	Available	Same day	10	29	[Steel] SUJ2 Equivalent	No Surface Treatment	19	High Grade	Single	Single	24	372	549
124,114 VND	1 Piece(s)	Available	Same day	12	57	[Steel] SUJ2 Equivalent	No Surface Treatment	21	High Grade	Double	Double	30	657	1200
82,810 VND	1 Piece(s)	Available	Same day	12	30	[Steel] SUJ2 Equivalent	No Surface Treatment	21	High Grade	Single	Single	24	412	598
140,832 VND	1 Piece(s)	Available	11 Day(s)	13	61	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Standard Grade	Double	Double	30	810	1570
94,999 VND	1 Piece(s)	Available	11 Day(s)	13	32	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Standard Grade	Single	Single	24	500	770
149,358 VND	1 Piece(s)	Available	Same day	16	70	[Steel] SUJ2 Equivalent	No Surface Treatment	28	High Grade	Double	Double	30	1230	2350
93,948 VND	1 Piece(s)	Available	Same day	16	37	[Steel] SUJ2 Equivalent	No Surface Treatment	28	High Grade	Single	Single	24	775	1180
155,684 VND	1 Piece(s)	Available	Same day	20	80	[Steel] SUJ2 Equivalent	No Surface Treatment	32	High Grade	Double	Double	40	1400	2740
99,772 VND	1 Piece(s)	Available	Same day	20	42	[Steel] SUJ2 Equivalent	No Surface Treatment	32	High Grade	Single	Single	30	882	1370
220,952 VND	1 Piece(s)	Available	Same day	25	112	[Steel] SUJ2 Equivalent	No Surface Treatment	40	High Grade	Double	Double	40	1560	3140
133,431 VND	1 Piece(s)	Available	Same day	25	59	[Steel] SUJ2 Equivalent	No Surface Treatment	40	High Grade	Single	Single	30	980	1570
289,868 VND	1 Piece(s)	Available	Same day	30	123	[Steel] SUJ2 Equivalent	No Surface Treatment	45	High Grade	Double	Double	40	2490	5490
155,268 VND	1 Piece(s)	Available	Same day	30	64	[Steel] SUJ2 Equivalent	No Surface Treatment	45	High Grade	Single	Single	30	1570	2740
341,310 VND	1 Piece(s)	Available	11 Day(s)	35	135	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Standard Grade	Double	Double	40	2650	6470
220,359 VND	1 Piece(s)	Available	11 Day(s)	35	70	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Standard Grade	Single	Single	30	1670	3140
496,942 VND	1 Piece(s)	Available	Same day	40	151	[Steel] SUJ2 Equivalent	No Surface Treatment	60	High Grade	Double	Double	50	3430	8040
306,188 VND	1 Piece(s)	Available	Same day	40	80	[Steel] SUJ2 Equivalent	No Surface Treatment	60	High Grade	Single	Single	40	2160	4020
981,448 VND	1 Piece(s)	Available	11 Day(s)	50	192	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Standard Grade	Double	Double	50	7940	15900
581,177 VND	1 Piece(s)	Available	11 Day(s)	50	100	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Standard Grade	Single	Single	40	3820	7940
139,066 VND	1 Piece(s)	Available	Same day	6	35	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	12	High Grade	Double	Double	30	324	529
87,079 VND	1 Piece(s)	Available	Same day	6	19	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	12	High Grade	Single	Single	24	206	265
139,718 VND	1 Piece(s)	Available	Same day	8	45	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	15	High Grade	Double	Double	30	431	784
87,497 VND	1 Piece(s)	Available	Same day	8	24	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	15	High Grade	Single	Single	24	265	380
147,247 VND	1 Piece(s)	Available	Same day	10	55	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	19	High Grade	Double	Double	30	588	1100
93,859 VND	1 Piece(s)	Available	Same day	10	29	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	19	High Grade	Single	Single	24	372	549
147,772 VND	1 Piece(s)	Available	Same day	12	57	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	21	High Grade	Double	Double	30	657	1200
98,340 VND	1 Piece(s)	Available	Same day	12	30	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	21	High Grade	Single	Single	24	412	598
188,206 VND	1 Piece(s)	Available	11 Day(s)	13	61	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	23	Standard Grade	Double	Double	30	810	1570
130,952 VND	1 Piece(s)	Available	11 Day(s)	13	32	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	23	Standard Grade	Single	Single	24	500	770
177,153 VND	1 Piece(s)	Available	Same day	16	70	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	28	High Grade	Double	Double	30	1230	2350
111,327 VND	1 Piece(s)	Available	Same day	16	37	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	28	High Grade	Single	Single	24	775	1180
185,096 VND	1 Piece(s)	Available	Same day	20	80	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	32	High Grade	Double	Double	40	1400	2740
118,338 VND	1 Piece(s)	Available	Same day	20	42	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	32	High Grade	Single	Single	30	882	1370
258,185 VND	1 Piece(s)	Available	Same day	25	112	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	40	High Grade	Double	Double	40	1560	3140
156,930 VND	1 Piece(s)	Available	Same day	25	59	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	40	High Grade	Single	Single	30	980	1570
342,928 VND	1 Piece(s)	Available	Same day	30	123	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	45	High Grade	Double	Double	40	2490	5490
182,393 VND	1 Piece(s)	Available	Same day	30	64	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	45	High Grade	Single	Single	30	1570	2740
405,348 VND	1 Piece(s)	Available	11 Day(s)	35	135	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	52	Standard Grade	Double	Double	40	2650	6470
264,344 VND	1 Piece(s)	Available	11 Day(s)	35	70	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	52	Standard Grade	Single	Single	30	1670	3140
584,449 VND	1 Piece(s)	Available	Same day	40	151	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	60	High Grade	Double	Double	50	3430	8040
359,255 VND	1 Piece(s)	Available	Same day	40	80	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	60	High Grade	Single	Single	40	2160	4020
1,176,971 VND	1 Piece(s)	Available	11 Day(s)	50	192	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	80	Standard Grade	Double	Double	50	7940	15900
684,587 VND	1 Piece(s)	Available	11 Day(s)	50	100	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	80	Standard Grade	Single	Single	40	3820	7940

Loading...Tải…

Dimensional Drawing

When this product is initially delivered, its color may be partially inconsistent with the photo, in which case the actual product shall prevail, without prior notice.

Specification Table

■Material Specification Table

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material	Operating Environment Temperature	Accessories
Equivalent to SUJ2	58HRC～	No Surface Treatment Electroless Nickel Plating	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber (-20 to 120℃)

		Part Number (Type ・Diameter of Inscribed Circle dr ・Ball Retainer)
		E-LBFPM20LUU

■Dimension Specification Table

Part Number					O.D. D			Overall Length L			ℓ	H	T	d	d	t	P.C.D.	Eccentricity (Max.)
Type	dr			Ball Retainer



		Tolerance				Tolerance		Single	Double	Tolerance								Single	Double
		Single	Double			No Surface Treatment	With Surface Treatment

E－LBFP E－LBFPM	6	0 -0.009	0 -0.01	UU (Single) LUU (Double)	12	0 -0.025	0 -0.02	19	35	±0.3	5	28	5	3.5	6	3.1	20	0.024	0.03
	8				15			24	45			32					24
	10				19			29	55		6	40	6	4.5	7.5	4.1	29
	12				21			30	57			42					32
	13				23			32	61			43					33
	16				28			37	70			48					38
	20	0 -0.01	0 -0.012		32	0 -0.03	0 -0.03	42	80		8	54	8	5.5	9	5.1	43	0.03	0.04
	25				40			59	112			62					51
	30				45			64	123		10	74	10	6.6	11	6.1	60
	35	0 -0.012	0 -0.015		52	0 -0.035		70	135			82					67
	40				60			80	151		13	96	13	9	14	8.1	78	0.04	0.05
	50	0 -0.015			80			100	192			116					98

* mark shows the verticality between Part D and the flange mounting surface.

For information on the flanged height adjusting ring, please refer to the

Adjusting Ring.

dr	Rows of balls	Perpendicularity		Basic Load Rating				Double Type Allowable Static Moment （N·m）	Mass(g)
		Perpendicularity		Basic Load Rating C (Dynamic) N		Basic Load Rating Co (Static) N

		Single	Double	Single	Double	Single	Double		Single	Double
6	4	0.035	0.04	206	324	265	529	2.18	24	31
8				265	431	380	784	4.31	37	51
10				372	588	549	1100	7.24	72	98
12				412	657	598	1200	10.9	76	110
13				500	810	770	1570	11.6	88	130
16	5			775	1230	1180	2350	19.7	120	190
20	5			882	1400	1370	2740	26.8	180	260
25	6			980	1560	1570	3140	43.4	340	540
30				1570	2490	2740	5490	82.8	470	680
35		0.045	0.05	1670	2650	3140	6470	110	650	1020
40		0.045	0.05	2160	3430	4020	8040	147	1060	1570
50		0.05	0.055	3820	6080	7940	15900	397	2200	3600

Usage Method of Linear Bushings

Product Drawings of Linear Bushings	Instructions for use Linear Bushings
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions of Linear Bushings

■ Linear Bushings Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
for details. ③ Recommended grease filling interval: Usually every 6 months.
④When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
⑤ When the linear bearing is subjected to large moment load (eccentric load), one piece of single liner type is not applicable, so it is recommended to use one piece of double liner type or multiple pieces of single liner type.

■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Application Industries of Linear Bushings

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Related Products of Linear Bushings

Compact Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Round Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Square Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole

Basic InformationThông tin cơ bản

Type	Flange	Flange Type	Male-Female Joint Flanged	Style	Standard
Lubrication Type	Not Provided	Motion	Linear	Types	Pilot Flanged
Ball Material	Equivalent to SUJ2	Retainer Material	Resin	Seal	Provided
Greased Filled	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Outer Sleeve Material

Outer Sleeve Surface Treatment

Outer Dia. D(Ø)

Accuracy

Ball Recirculating Type

Length

Eccentricity(µm)

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Round Flanged Linear Bushings With Pilot, Single / Double

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Economy Round Flanged Linear Bushing with Pilot

Product Overview of Linear Bushings

Product Features of Linear Bushings

Dimensional Drawing of Linear Bushings

Specifications Overview of Linear Bushings

Part Number

Precautions of Linear Bushings

Related Documents of Linear Bushings

Application Industries of Linear Bushings

Related Products of Linear Bushings

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng