What brand is the linear bearing of FA?

The linear bearing of FA is MISUMI brand.

What is the difference between the single liner type and the double liner type of linear bearing of FA?

Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.

Is there a product stamp on the linear bearing?

There is no stamp on the product body, and the product model is on the packaging box.

When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?

The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.

How to deal with oil leakage in the received linear bearing?

Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.

How much load does linear bearing carry?

For specific load carried, please refer to Load Carried information

Can linear bearing be rotated?

The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

MISUMI

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

[Thông báo] Sử Dụng Địa Chỉ Hành Chính Mới Cho Giao/Nhận Hàng Hóa Từ 1/10/2025. Xem chi tiết.
[Notice] Update of Official Address for Delivery and Receipt of Goods from October 1, 2025. See more.
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng - Yêu Cầu Trả Phí Ship. Xem chi tiết
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(60 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LB3LUU

Inscribed Circle Dia. dr Overall Length L Outer Sleeve Material Outer Sleeve Surface Treatment Outer Dia. D Ball Recirculating Type Length Eccentricity Ball Material Retainer Material Seal type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
3

4

5

6

8

10

12

13

16

20

25

30

35

40

50
ClearTrống
Overall Length L(mm)
10

12

15

19

23

24

28

29

30

32

35

37

42

45

55

57

59

61

64

70

80

100

112

123

135

151

192
ClearTrống
Outer Sleeve Material
- Steel
  - SUJ2 Equivalent
  - SUJ2 Equivalent
ClearTrống
Outer Sleeve Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
  - Electroless nickel plating
ClearTrống
Outer Dia. D(Ø)
7

7$8

8

10

12

15

19

21

23

28

32

40

45

52

60

80
ClearTrống
Ball Recirculating Type
- Single
- Double
ClearTrống
Length
- Single
- Double
ClearTrống
Eccentricity(µm)
12

15

24

30

35

40

45
ClearTrống
Ball Material
- SUJ2 Equivalent
ClearTrống
Retainer Material
Plastic
ClearTrống
Seal
- Provided
ClearTrống
type
- C-LBM
- E-LBM□□LUU
- E-LBM□□UU
- E-LB□□LUU
- E-LB□□UU
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

11 Day(s) or Less

12 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Bushings Straight Single / Double

Volume Discount

Check FAQ of this product (9 items)

Brand :

MiSUMi Economy

Part Number :

E-LB3LUU

E-LB3UU

E-LB4LUU

E-LB4UU

E-LB5LUU

E-LB5UU

E-LB6LUU

E-LB6UU

E-LB8LUU

E-LB8UU

E-LB10LUU

E-LB10UU

E-LB12LUU

E-LB12UU

E-LB13LUU

E-LB13UU

E-LB16LUU

E-LB16UU

E-LB20LUU

E-LB20UU

E-LB3LUU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Note: When ordering item E-LB**UU, you may receive product with package printed C-LM**UU. This is Misumi's product code convertion only, there is no spec difference between these 2 items

Product Description

Linear Bushings Straight Single / Double
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Features]
● Support Shaft Diameter Minimum/Maximum (mm.): 5 and 50
● Overall Length Minimum/Maximum (mm.): 15 and 151
● Shape : Straight
● Ball Recirculating Type : Single or Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
See more ...

Economy Straight Linear Bushing

Linear bushingDurablePrecise

- Precision straight linear bushing for accurate linear motion.

- High-quality SUJ2 equivalent material for durability.

- Available in various shaft diameters

- Single and double ball recirculating types for different needs.

- Ideal for conveyor systems and robotic equipment.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Dimensional Drawing

This product is delivered at the initial stage, the color of the packing may be inconsistent with the photo, which shall be subject to the actual product.

Resin retainers are available in black and yellow, with the same performance. Please feel free to use.

For inner diameters of 3 and 4, the design uses a retaining ring. For inner diameters of 5 and above, a seal ring is applied.

Specifications Overview

Type	dr[Φ:mm]	Housing			Ball	Retainer	Operating environment temperature	Accessories
		Material	Hardness	Surface Treatment	Material	Material
C-LM_UU	6~30	Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	-20~80℃	Seal Ring Material Nitrile Rubber
E-LB_UU	3~50
E-LBM_UU	3~50			Electroless Nickel Plating

If there are requirements for rust prevention, give priority to MISUMI standard products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.

Specification Table

		Part Number ( Type ・Diameter dr ・Ball Retainer )
		C-LM8UU E-LB6UU

■ Dimension Specification Table

Resin retainers are available in black and yellow, with the same performance. Please feel free to use.

For inner diameters of 3 and 4, the design uses a retaining ring. For inner diameters of 5 and above, a seal ring is applied.

Part Number				O.D. D Tolerance					Overall Length L( Single Type )		Overall Length L( Double Type )		B
Type	dr	Tolerance	Ball Retainer (Length Type)		E-LB		E-LBM			Tolerance		Tolerance	Single Type	Double Type	Tolerance
					Single No Surface Treatment	Double No Surface Treatment	Single With Surface Treatment	Double With Surface Treatment
E-LB (No Surface Treatment) E-LBM (Electroless Nickel Plating)	3	0 -0.011	UU (Single Type) LUU (Double Type)	7	0 -0.010	0 -0.012	0 -0.012	0 -0.012	10	0 -0.15	19	±0.2	/	/	/
	4			8					12		23		/	/	/
	5	＋0.003 -0.012		10	0 -0.013	0 -0.015	0 -0.015	0 -0.015	15	＋0.2 -0.4	28	±0.3	8	-	0 -0.4
	6			12					19		35	+0.3 -0.6	11.3	24.8
	8			15					24		45		15.3	32.8
	10			19	0 -0.015		0 -0.016	0 -0.016	29		55		19.4	41.4
	12			21		0 -0.018			30		57		20.4	43.4
	13			23					32		61
	16			28					37		70		23.3	49.8
	20	＋0.003 -0.013		32	0 -0.018	0 -0.021	0 -0.018	0 -0.019	42		80		27.3	57.8
	25			40					59	＋0.2 -0.5	112	＋0.3 -0.7	37.3	78.3	0 -0.5
	30			45					64		123		40.8	85.3
	35	＋0.003 -0.014		52	0 -0.025	0 -0.028	0 -0.023	0 -0.025	70		135		45.3	94.8
	40			60					80		151		56.3	116.8
	50	＋0.003 -0.015		80	0 -0.028	0 -0.03	0 -0.025	0 -0.03	100		192	0.3 -0.7	68.8	142.8

dr	W	D₁	Eccentricity(Max.)		Rows of balls	Basic Load Rating C (Dynamic) N		Basic Load Rating Co (Static) N		Mass(g)		Double Type Allowable Static Moment （N·m）
dr	W	D₁	Single Type	Double Type	Rows of balls	Single Type	Double Type	Single Type	Double Type	Single Type	Double Type	Double Type Allowable Static Moment （N·m）
3	/	/	0.012	0.015	4	69	105	138	210	1.35	3.2	-
4	/	/	0.012	0.015		88	127	176	254	1.9	4.8	-
5	1.1	9.6	0.024	0.025		167	261	206	412	4	8.4	2
6		11.5		0.03		206	324	265	529	8.5	16	2.18
8		14.3				265	431	380	784	17	31	4.31
10	1.3	18				372	588	549	1100	31	62	7.24
12		20				412	657	598	1200	41	80	10.9
13		22				510	813	784	1570	46	90	11.6
16	1.6	27			5	775	1230	1180	2350	73	145	19.7
20	1.6	30.5	0.03	0.04	5	882	1400	1370	2740	98	180	26.8
25	1.85	38			6	980	1560	1570	3140	236	440	43.4
30	1.85	43				1570	2490	2740	5490	262	480	82.8
35	2.1	49	0.035	0.045		1670	2650	3140	6270	425	795	110
40	2.1	57				2160	3430	4020	8040	654	1170	147
50	2.6	76.5				3820	6080	7940	15900	1700	3100	152

If rust prevention is required, please prioritize products with electroless nickel plating.

Specification of "E-LB" corresponds to the spec of "C-LM". Difference between these 2 type is only Part No.
■ Dimension Specification Table

Part Number			D		L		B		W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	Basic Rated Load
Type	dr	Tolerance		Tolerance		Tolerance		Tolerance	W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	C (Dynamic) N	Co (Static) N
C-LM_UU	6	+0.003 -0.012	12	0 -0.013	19	+0.2 -0.4	11.3	0 -0.4	1.1	11.5	0.024	4	7.4	206	265
	8		15	0 -0.013	24		15.3		1.1	14.3			13	265	380
	10		19	0 -0.015	29		19.4		1.3	18			24	372	549
	12		21		30		20.4		1.3	20			27	412	598
	16		28		37		23.3		1.6	27		5	74	775	1180
	20	+0.003 -0.013	32	0 -0.018	42		27.3		1.6	30.5	0.030	5	83	882	1370
	25		40		59	+0.2 -0.5	37.3	0 -0.5	1.9	38		6	206	980	1570
	30		45		64	+0.2 -0.5	40.8	0 -0.5	1.9	43		6	229	1570	2740

Usage Method

Product Drawings	Instructions for use
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions

■ Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
③ Recommended grease filling interval: Usually every 6 months.
When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Related Products

Guide shaft Straight bar type	Linear bearing holder assembly Widened square shape	Linear bearing Standard type Straight type

Typical model: SFJ20-75	Typical model: LHBB8	Typical model: LMU8

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LB3LUU
E-LB3UU
E-LB4LUU
E-LB4UU
E-LB5LUU
E-LB5UU
E-LB6LUU
E-LB6UU
E-LB8LUU
E-LB8UU
E-LB10LUU
E-LB10UU
E-LB12LUU
E-LB12UU
E-LB13LUU
E-LB13UU
E-LB16LUU
E-LB16UU
E-LB20LUU
E-LB20UU
E-LB25LUU
E-LB25UU
E-LB30LUU
E-LB30UU
E-LB35LUU
E-LB35UU
E-LB40LUU
E-LB40UU
E-LB50LUU
E-LB50UU
E-LBM3LUU
E-LBM3UU
E-LBM4LUU
E-LBM4UU
E-LBM5LUU
E-LBM5UU
E-LBM6LUU
E-LBM6UU
E-LBM8LUU
E-LBM8UU
E-LBM10LUU
E-LBM10UU
E-LBM12LUU
E-LBM12UU
E-LBM13LUU
E-LBM13UU
E-LBM16LUU
E-LBM16UU
E-LBM20LUU
E-LBM20UU
E-LBM25LUU
E-LBM25UU
E-LBM30LUU
E-LBM30UU
E-LBM35LUU
E-LBM35UU
E-LBM40LUU
E-LBM40UU
E-LBM50LUU
E-LBM50UU

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Sleeve Material	Outer Sleeve Surface Treatment	Outer Dia. D (Ø)	Ball Recirculating Type	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)	Ball Material	Retainer Material	Seal
98,219 VND	1 Piece(s)	Available	11 Day(s)	3	19	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Double	Double	15	105	210	-0.011	-	-	-
45,180 VND	1 Piece(s)	Available	11 Day(s)	3	10	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Single	Single	12	69	138	-0.011	-	-	-
84,813 VND	1 Piece(s)	Available	11 Day(s)	4	23	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Double	Double	15	127	254	-0.011	-	-	-
41,037 VND	1 Piece(s)	Available	11 Day(s)	4	12	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Single	Single	12	88	176	-0.011	-	-	-
80,370 VND	1 Piece(s)	Available	11 Day(s)	5	28	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Double	Double	30	263	412	-0.015	SUJ2 Equivalent	Plastic	Provided
62,801 VND	1 Piece(s)	Available	Same day	5	15	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Single	Single	24	167	206	-0.013	SUJ2 Equivalent	Plastic	Provided
48,784 VND	1 Piece(s)	Available	Same day	6	35	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Double	Double	30	324	529	-0.012	SUJ2 Equivalent	Plastic	Provided
22,495 VND	1 Piece(s)	Available	Same day	6	19	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Single	Single	24	206	265	-0.012	SUJ2 Equivalent	Plastic	Provided
48,063 VND	1 Piece(s)	Available	Same day	8	45	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Double	Double	30	431	784	-0.012	SUJ2 Equivalent	Plastic	Provided
22,514 VND	1 Piece(s)	Available	Same day	8	24	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Single	Single	24	265	380	-0.012	SUJ2 Equivalent	Plastic	Provided
49,655 VND	1 Piece(s)	Available	Same day	10	55	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Double	Double	30	588	1100	-0.012	SUJ2 Equivalent	Plastic	Provided
23,086 VND	1 Piece(s)	Available	Same day	10	29	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Single	Single	24	372	549	-0.012	SUJ2 Equivalent	Plastic	Provided
51,191 VND	1 Piece(s)	Available	Same day	12	57	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Double	Double	30	657	1200	-0.012	SUJ2 Equivalent	Plastic	Provided
24,156 VND	1 Piece(s)	Available	Same day	12	30	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Single	Single	24	412	598	-0.012	SUJ2 Equivalent	Plastic	Provided
84,534 VND	1 Piece(s)	Available	Same day	13	61	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Double	Double	30	813	1570	-0.018	SUJ2 Equivalent	Plastic	Provided
37,804 VND	1 Piece(s)	Available	Same day	13	32	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Single	Single	24	510	784	-0.015	SUJ2 Equivalent	Plastic	Provided
58,355 VND	1 Piece(s)	Available	Same day	16	70	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Double	Double	30	1230	2350	-0.012	SUJ2 Equivalent	Plastic	Provided
28,500 VND	1 Piece(s)	Available	Same day	16	37	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Single	Single	24	775	1180	-0.012	SUJ2 Equivalent	Plastic	Provided
59,937 VND	1 Piece(s)	Available	Same day	20	80	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Double	Double	40	1400	2740	-0.013	SUJ2 Equivalent	Plastic	Provided
33,851 VND	1 Piece(s)	Available	Same day	20	42	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Single	Single	30	882	1370	-0.013	SUJ2 Equivalent	Plastic	Provided
104,788 VND	1 Piece(s)	Available	Same day	25	112	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Double	Double	40	1560	3140	-0.013	SUJ2 Equivalent	Plastic	Provided
50,219 VND	1 Piece(s)	Available	Same day	25	59	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Single	Single	30	980	1570	-0.013	SUJ2 Equivalent	Plastic	Provided
129,256 VND	1 Piece(s)	Available	Same day	30	123	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Double	Double	40	2490	5490	-0.013	SUJ2 Equivalent	Plastic	Provided
65,474 VND	1 Piece(s)	Available	Same day	30	64	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Single	Single	30	1570	2740	-0.013	SUJ2 Equivalent	Plastic	Provided
238,237 VND	1 Piece(s)	Available	Same day	35	135	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Double	Double	45	2650	6270	-0.028	SUJ2 Equivalent	Plastic	Provided
123,349 VND	1 Piece(s)	Available	Same day	35	70	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Single	Single	35	1670	3140	-0.025	SUJ2 Equivalent	Plastic	Provided
305,463 VND	1 Piece(s)	Available	Same day	40	151	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Double	Double	45	3430	8040	-0.028	SUJ2 Equivalent	Plastic	Provided
144,307 VND	1 Piece(s)	Available	Same day	40	80	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Single	Single	35	2160	4020	-0.023	SUJ2 Equivalent	Plastic	Provided
594,830 VND	1 Piece(s)	Available	12 Day(s)	50	192	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Double	Double	45	6080	15900	-0.015	-	-	-
365,234 VND	1 Piece(s)	Available	Same day	50	100	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Single	Single	35	3820	7940	-0.015	SUJ2 Equivalent	Plastic	Provided
99,952 VND	1 Piece(s)	Available	11 Day(s)	3	19	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	7$8	Double	Double	15	105	210	-0.011	-	-	-
46,159 VND	1 Piece(s)	Available	11 Day(s)	3	10	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	7	Single	Single	12	69	138	-0.011	-	-	-
102,663 VND	1 Piece(s)	Available	11 Day(s)	4	23	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	8	Double	Double	15	127	254	-0.011	-	-	-
45,180 VND	1 Piece(s)	Available	11 Day(s)	4	12	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	8	Single	Single	12	88	176	-0.011	-	-	-
82,178 VND	1 Piece(s)	Available	11 Day(s)	5	28	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	10	Double	Double	30	263	412	-0.015	SUJ2 Equivalent	Plastic	Provided
70,562 VND	1 Piece(s)	Available	Same day	5	15	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	10	Single	Single	24	167	206	-0.015	SUJ2 Equivalent	Plastic	Provided
75,998 VND	1 Piece(s)	Available	Same day	6	35	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	12	Double	Double	30	324	529	-0.015	SUJ2 Equivalent	Plastic	Provided
37,804 VND	1 Piece(s)	Available	Same day	6	19	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	12	Single	Single	24	206	265	-0.015	SUJ2 Equivalent	Plastic	Provided
75,998 VND	1 Piece(s)	Available	Same day	8	45	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	15	Double	Double	30	431	784	-0.015	SUJ2 Equivalent	Plastic	Provided
32,183 VND	1 Piece(s)	Available	Same day	8	24	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	15	Single	Single	24	265	380	-0.015	SUJ2 Equivalent	Plastic	Provided
79,877 VND	1 Piece(s)	Available	Same day	10	55	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	19	Double	Double	30	588	1100	-0.016	SUJ2 Equivalent	Plastic	Provided
40,131 VND	1 Piece(s)	Available	Same day	10	29	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	19	Single	Single	24	372	549	-0.016	SUJ2 Equivalent	Plastic	Provided
81,430 VND	1 Piece(s)	Available	Same day	12	57	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	21	Double	Double	30	657	1200	-0.016	SUJ2 Equivalent	Plastic	Provided
41,685 VND	1 Piece(s)	Available	Same day	12	30	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	21	Single	Single	24	412	598	-0.016	SUJ2 Equivalent	Plastic	Provided
97,731 VND	1 Piece(s)	Available	Same day	13	61	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	23	Double	Double	30	813	1570	-0.016	SUJ2 Equivalent	Plastic	Provided
42,461 VND	1 Piece(s)	Available	Same day	13	32	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	23	Single	Single	24	510	784	-0.016	SUJ2 Equivalent	Plastic	Provided
86,088 VND	1 Piece(s)	Available	Same day	16	70	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	28	Double	Double	30	1230	2350	-0.016	SUJ2 Equivalent	Plastic	Provided
42,461 VND	1 Piece(s)	Available	Same day	16	37	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	28	Single	Single	24	775	1180	-0.016	SUJ2 Equivalent	Plastic	Provided
96,956 VND	1 Piece(s)	Available	Same day	20	80	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	32	Double	Double	40	1400	2740	-0.019	SUJ2 Equivalent	Plastic	Provided
52,553 VND	1 Piece(s)	Available	Same day	20	42	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	32	Single	Single	30	882	1370	-0.018	SUJ2 Equivalent	Plastic	Provided
162,162 VND	1 Piece(s)	Available	Same day	25	112	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	40	Double	Double	40	1560	3140	-0.019	SUJ2 Equivalent	Plastic	Provided
82,205 VND	1 Piece(s)	Available	Same day	25	59	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	40	Single	Single	30	980	1570	-0.018	SUJ2 Equivalent	Plastic	Provided
171,478 VND	1 Piece(s)	Available	Same day	30	123	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	45	Double	Double	40	2490	5490	-0.019	SUJ2 Equivalent	Plastic	Provided
93,849 VND	1 Piece(s)	Available	Same day	30	64	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	45	Single	Single	30	1570	2740	-0.018	SUJ2 Equivalent	Plastic	Provided
300,804 VND	1 Piece(s)	Available	Same day	35	135	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	52	Double	Double	45	2650	6270	-0.025	SUJ2 Equivalent	Plastic	Provided
149,741 VND	1 Piece(s)	Available	Same day	35	70	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	52	Single	Single	35	1670	3140	-0.023	SUJ2 Equivalent	Plastic	Provided
376,102 VND	1 Piece(s)	Available	Same day	40	151	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	60	Double	Double	45	3430	8040	-0.025	SUJ2 Equivalent	Plastic	Provided
176,136 VND	1 Piece(s)	Available	Same day	40	80	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	60	Single	Single	35	2160	4020	-0.023	SUJ2 Equivalent	Plastic	Provided
675,420 VND	1 Piece(s)	Available	12 Day(s)	50	192	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless nickel plating	80	Double	Double	45	6080	15900	-0.015	-	-	-
450,624 VND	1 Piece(s)	Available	Same day	50	100	[Steel] SUJ2 Equivalent	[Surface Treatment] Electroless Nickel Plating	80	Single	Single	35	3820	7940	-0.015	SUJ2 Equivalent	Plastic	Provided

Loading...Tải…

■ Test conditions
•Linear bearing (inner diameter 16) is matched with MISUMI guide shaft (PSFJ) to apply 63kg load and walk for 30km, and confirm the product damage and sliding noise.
Product Feature Drawings

■ Test results
The economy series product ensures smooth sliding of steel ball, which have good durability and low noise
Product Feature Drawings

*Products circulating on the market are similar products randomly purchased by our company from online or offline markets
*The test data are obtained through testing by our company, which are for reference only

Example of Use

Equipment Name:
Stamping die position adjustment component

Design Purpose:
Adjust the position of the stamping die to correct the deviation of the opening position in the width direction of the sheet workpiece.

Application Description:
By matching with the cylinder, it realizes the guidance of the linear motion of the workpiece in the horizontal direction.

Application Industries

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Basic InformationThông tin cơ bản

Type	Straight	Style	Standard	Lubrication Type	Not Provided
Accuracy	Standard Grade	Motion	Linear	Types	Straight

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What brand is the linear bearing of FA?: Answer:Answer: The linear bearing of FA is MISUMI brand.
Question:Question: What is the difference between the single liner type and the double liner type of linear bearing of FA?: Answer:Answer: Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.
Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.
Question:Question: Is there a product stamp on the linear bearing?: Answer:Answer: There is no stamp on the product body, and the product model is on the packaging box.
Question:Question: When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?: Answer:Answer: The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.
Question:Question: How to deal with oil leakage in the received linear bearing?: Answer:Answer: Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.
Question:Question: How much load does linear bearing carry?: Answer:Answer: For specific load carried, please refer to Load Carried information
Question:Question: Can linear bearing be rotated?: Answer:Answer: The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

Check other FAQ (6 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Outer Sleeve Material

Outer Sleeve Surface Treatment

Outer Dia. D(Ø)

Ball Recirculating Type

Length

Eccentricity(µm)

Ball Material

Retainer Material

Seal

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Bushings Straight Single / Double

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Economy Straight Linear Bushing

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng